## DRAGRI Lite Reference Manual

1. Table of Contents
2. Installing the Program
3. Top menu
4. Editing a Movie
5. Designing a Page
6. Album
7. Appendix

> ### Editing a Movie

> > In DRAGRI Lite, you can edit a movie according to the following three steps.

> > 1. Set the starting point.
> > 2. Set the end point.
> > 3. Draw a drag path.

> ### Set the starting point

> > Moving the slider (1) under the video, select the frame you wish to make starting point.

> > In this example, you set the starting point at the beginning of nodding. Then press [Start Point] button (2).

> > The left-hand semicircular marker, indicating the starting point, is displayed at the upper-left of frame.

> ### Set the end point

> > In a similar manner, move the slider (3) and specify the end point pressing the button (4).

> > The right-hand semicircular mark will be displayed at the upper-right of the frame.

> ### Draw a drag path

> > Next, draw a drag path (5) along the line of movement for the object in the video.

> ### Test

> > After drawing a drag path, drag a mouse near the path, that the video will be moved along with your operation.

> ### Add more drag paths

> > If there is more than one movement in the video, you can add drag paths in the same manner.

> ### Editing the drag path

> > When there is a gap between mouse operation and the movement of object in the video, you can modify the drag path moving small blue rectangles on the path.

> > #### Adding a point

> > > To add a point to a drag path, click on the line indicating the drag path at the point where you wish to add the new point.

> > #### Moving a point

> > > A point on a drag path can be moved by dragging it.

> > #### Deleting a point

> > > To delete a point on a drag path, drag the point you wish to delete to another point.

> > #### Reverse the direction of the drag path

> > > When you draw a drag path in reverse direction, you can flip it by pressing button.

> > #### Delete a drag path

> > > To delete a drag path, select the drag path and press button. 編集中のドラッグパスを削除できます。

> ### Changing focus between drag paths

> > If there is more than one drag path on the movie, the viewer cannot normally move from one drag path to another while mouse button remains pressed. However, it is possible to allow this move using the following method.

> > While pressing the CTRL key on the keyboard, click the drag path from where you wish to allow a focus switch to another drag path. The line then turns black.

> > The red line indicates it has the input focus.

> > The black line indicates it doesn't have the input focus and the viewer can move another drag path pressing the mouse button.

> ### Setting Movie Size

> > Pressing [Reduce] button, shrink the movie size. To enlarge the image, press [Enlarge] button. To set back normal size, press [Original] button.

> ### Finish editing

> > When you finish editing, press [Next] button.

[Next]

DRAGRI Lite Manual
Copyright (C) 2002 NTT Advanced Technology Corporation.