I just re-patched my P-80 and tried them so I know the      
following values work.                                      
If you have Debug, this will be a bit more lengthy than the 
last note.                                                  
DEBUG P80.SPC <ENTER>                                       
E 1E5 03 03 <ENTER>                                         
E 1E8 01 0B 02 00 C8 00 27 06 09 00 01 00 00 00 96 00 <E>   
E 218 03 0A 82 00 02 00 E8 03 64 00 01 00 64 00 2C 01 <E>   
E 228 02 03 01 00 01 00 30 75 E8 03 01 00 32 00 5E 01 <E>   
E 238 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <E>   
E 248 04 0E 02 00 01 00 30 75 E8 03 01 00 32 00 5E 01 <E>   
E 258 03 0A 82 00 02 00 E8 03 64 00 10 00 64 00 2C 01 <E>   
W <ENTER>                                                   
Q <ENTER>                                                   
                               >>>>>>>                      
This will alter the weapons table to allow the addition of  
extra weapons in the optional weapons menu and place a 20mm 
cannon with dual tracers and 200 rnds of ammo (on counter)  
in the P-80.                                                
Type very carefully. These values do work as I have tested  
them.                                                       
If you use a hex editor like PCTOOLS subtract "100" from the
addresses at the head of the line. Example 1E8-100=0E8.     
This will yield the correct byte addresses for these        
patches.                                                    
                                   Keith Heitmann, GVXV90A  




