This driver diskette contains one EISA configuration directory and five other
driver directories for DOS, Windows NT and NetWare. OS/2 driver is under ROOT
directory.

A DOS driver installation file (INSTALL.EXE), which resides in the <DOS>
directory, can help you install the drivers by auto-updating the AUTOEXEC.BAT
& CONFIG.SYS files.

*****************************************************************************
*                                                                           *
*  In this diskette                                                         *
*                                                           *
*                                                                           *
*  This readme file provides information for:                               *
*  A.    Discussion of "DOS 5 Support" and "Max Disk Capactity" Options     *
*  1.    Files under the <CF> directory: EISA Configuration Utility         *
*  2.    Files under the <DOS> directory: ASPI Drivers                      *
*  3.    Files under the <NETWARE.310>: NetWare 3.10                        *
*  4.    Files under the <NETWARE.31x>: NetWare 3.11/3.12/SFT-III           *
*  5.    Files under the <NETWARE.4XX>: NetWare 4.00/4.01/4.02/4.10              *
*  6.    Files under the root directory for OS/2 v2.0/2.1/2.11/WARP 3.0     *
*  7.    Files under the <WINNT.3X>: Windows NT 3.1/3.5 Drivers             *
*                                                                           *
*****************************************************************************


A. Working with ">1GB HDD support" under assorted operating systems

  The following table indicates how to support >1GB HDD under
  assorted operating systems by changing the settings: "Max DOS disk
  Capacity" & "DOS 5 Support Enabled/Disabled". It also shows where
  the installation of device drivers is a MUST under certain Operating
  Systems.

Ŀ
 O.S.            DC-8X0/3X0   "Max DOS disk  "DOS 5         Tekram     
                 SUPPORT >1G   Capacity"      Support"      driver     
                               option         option        INSTALLED? 
Ĵ
 DOS                 Yes           > 1G        Enabled         No      
 (Windows/WFWG)                                                        
Ĵ
 OS/2 2.x/3.0        Yes           1G          Disabled        Yes     
Ĵ
 WINDOWS NT 3.X      Yes           1G          Disabled        Yes     
Ĵ
 NETWARE V3.1X       Yes           1G          Disabled        Yes     
Ĵ
 NETWARE V4.0X       Yes           1G          Disabled        Yes     
Ĵ
 SCO UNIX            Yes           1G          Disabled        No      
Ĵ
 SOLARIS V2.4        Yes           1G          Disabled        No      
Ĵ
 UNIXWARE V1.1       Yes           1G          Disabled        No      


* "OS/2 v2.x/3.0 + >1GB HDD" => Special care is needed to achieve this.
   Specify <1GB capacity for the PRIMARY partition and leave the rest of
   the HDD capacity as the EXTENDED partition. The procedure should work like
   this:
   1. During installation, specify your own installation partition and not
      the PRE-DEFINED partition.
   2. You can then create a partition of less than 1024MB.
   3. Re-boot the system and install DC-3X0/8X0's OS/2 driver.
   4. Re-boot and use FDISK to create an EXTENDED partition for the rest
      of the hard disk.

1. <CF>: Contains EISA configuration files, overlay files, and an advanced
         setup utility for MCS or other ECUs.

    1.1. <MCS>: (advanced utility already included)
                a. DC-820  => copy both the !TRM0820.CFG and TRM0820.OVL
                              to your ECU diskette.
                b. DC-320B => copy both the !TRM0320.CFG and TRM0320.OVL
                              to your ECU diskette.
                c. DC-820B => copy both the !TRM820B.CFG and TRM820B.OVL
                              to your ECU diskette.
                d. DC-320E => copy both the !TRM320E.CFG and TRM320E.OVL
                              to your ECU diskette.

    1.2. <OTHER>: (other ECUs, such as AMI ... etc.)
                a. DC-820  => copy the !TRM0820.CFG to your ECU diskette.
                b. DC-320B => copy the !TRM0320.CFG to your ECU diskette.
                c. DC-820B => copy the !TRM820B.CFG to your ECU diskette.
                d. DC-320E => copy the !TRM320E.CFG to your ECU diskette.

Note:
All *.CFG files in the \CF\OTHER subdirectory can work without the *.OVL
files under ALL ECUs. All functions are supported by ACF20SU.EXE.

2. <DOS>: Contains ASPI drivers and utilities.

   2.1. ASPIBME.SYS : ASPI driver  
   2.2. DISKDRV.SYS : ASPI driver for HDD and removable media devices
   2.3. TFDISK.EXE  : DOS compatible disk partition utility
   2.4. TOOLBME.EXE : Low-level format, mirroring initialization, disk
                      image copy/compare, & error logging utilities
   2.5. CHKDRIVE.EXE: Logical drives status checking utility
   2.6. ASPICD.EXE  : CD-ROM driver
   2.7. INSTALL.EXE : This is a DOS driver installtion utility that helps
                      you install the device drivers for HDDs, removable
                      media, CD-ROM, and tapes by auto-updating the
                      CONFIG.SYS and AUTOEXEC.BAT files.

3. <NETWARE.310>: Contains drivers for Netware v3.10.

        3.1. NV310BME.DSK: disk driver / ASPI manager.
        3.2. BELOW16.DSK: memory allocator for memory below 16 Meg.
        3.3. ASPITRAN.DSK: ASPI transport layer driver.

4. <NETWARE.31X>: Contains drivers for Netware v3.11/v3.12/SFT-III.

        4.1. NV31XBME.DSK: disk driver / ASPI manager.
        4.2. ASPITRAN.DSK: ASPI transport layer driver.

5. <NETWARE.4XX>: Contains drivers for Netware v4.00/4.01/4.02/4.1.

        5.1. NV40XBME.DDI: installation configuration file.
        5.2. NV40XBME.DSK: disk driver / ASPI manager.
        5.3. ASPITRAN.DSK: ASPI transport layer driver.
        5.4. README.NW: Some Notes on Installation.

6. OS/2: Contains 4 files under the root directory of this driver
         diskette for OS/2 versions 2.0/2.1/2.11/WARP 3.0.

        6.1. README.OS2 : Procedures for driver Installation and Removal
        6.2. TRMSCSI.EXE: Execution file for DDINSTAL
        6.3. TRMSCSI.ADD: SCSI Device Driver
        6.4. TRMSCSI.DDP: SCSI Device Driver Profile

7. <WINNT.3x>: Contains drivers for Windows NT v3.1/3.5

        7.1. README.NT   : Procedures for driver Installation and Removal
        7.2. OEMSETUP.INF: Setup Information File
        7.3. DCSCSI.SYS  : SCSI Driver
        7.4. DCSCSI      : Setup Tag File
        7.5. TXTSETUP.OEM: Setup Tag File
