VIKTIGT.TXT
===========

Denna fil innehller information om de nya eller uppgraderade 
filter som finns p denna diskett. Samtliga filter p denna 
diskett, med undantag av filtret till Ventura Publisher, r ven 
kompatibla med Persuasion 2.0 fr Windows.

Fljande filter r helt nya:
- Ventura Publisher (VPIMP.FLT)
- Word for Windows 2.0 (WNWD2IMP.FLT)
- XY 3 Exportfilter (XY3EXP.FLT)
- XY3 Import (XY3IMP.FLT)

Fljande filter r uppgraderingar av de filter som 
levererades med PageMaker 4.0:
- ASCII/ANSI Importfilter (ASCIIMP.FLT)
- Excel Diagram Import (CHARTIMP.FLT)
- Excel Kalkylblad v. 2.2 and 3.0 Import (EXCELIMP.FLT)
- DCA/RFT Import (DCAIMP.FLT)
- Lotus 1-2-3 Import (123IMP.FLT)
- Tabellhanteraren Import (TEIMP.FLT)
- Word fr Windows 1.x Import (WINWDIMP.FLT)
- WordPerfect 5.1 for DOS/Windows Import (WP5IMP.FLT)
- WordPerfect 5.0/5.1 Export (WP5EXP.FLT)
- Micrografx Designer 3.1 / Micrografx Charisma 2.1 (MGXIMP.FLT)

Dessutom medfljer i katalogen ENG_XL den internationella 
engelska versionen av de tv Excel-filtren, eftersom dessa 
behvs om man vill importera filer frn den Engelska versionen 
av Excel fr Windows.


INSTALLATION AV NYTT FILTER
===========================
Om det r ett helt nytt filter som skall installeras mste du frst 
kopiera filterfilen (*.flt) till mappen ALDUS\SVENSKA\FILTER. 
Detta gr du antingen i Windows filsystem eller med COPY-kommandot i DOS.
Drefter mste du gra ett tillgg i filen ALDUS\SVENSKA\ALDUS.INI. 
ALDUS.INI r en textfil (ASCII) som kan ppnas med t.ex Windows 
Anteckningar eller Windows Write.

1. Gr en backup kopia av ALDUS.INI som kan kallas ALDUS.OLD.

2. ppna Anteckningar eller Write.

3. ppna C:\ALDUS\SVENSKA\ALDUS.INI

4. Lgg till en ny rad sist i avsnittet som heter [AldusImport] 
(eller [Aldus Export] om det r ett exportfilter)

5. Skriv in filter beskrivningen enligt fljande format:
Filter Beskrivning=FilterFilnamn,Tillggsnamn
S hr ska det se ut fr de nya filter som finns p denna diskett:

Ventura Publisher Import=VPIMP.FLT,CHP
Word for Windows 2.0=WNWD2IMP.FLT,DOC
XyWrite III Import Filter=XY3IMP.FLT,XY3
XyWrite III Export Filter=XY3EXP.FLT,XY3

Var noggrann med att det inte finns ngra mellanslag fre eller efter 
likamedtecknet (=) eller kommatecknet (,).

6. Spara ALDUS.INI

7. Starta om PageMaker. Du behver inte starta om Windows.


UPPGRADERA ETT FILTER SOM REDAN FINNS
=====================================
Om det filter du vill installera r en uppgradering av ett filter 
som du redan har installerat rcker det med att kopiera filter-filen 
frn disketten till mappen ALDUS\SVENSKA\FILTER.  

Om du inte redan har installerat det gamla filtret men vill 
installera uppgraderingen brjar du med att installera det gamla 
filtret p vanligt stt, med Aldus Installerare. Drefter kan du 
kopiera in uppgraderingen.



INFORMATION OM FILTREN P DISKETTEN 
===================================

-- ASCII/ANSI Import Filter - ASCIIMP.FLT (.TXT)
This filter has been revised to correctly import two German characters
when using German Windows.  It also includes an option to interpret text 
using either the ASCII or ANSI character set.  This provides better support 
for characters located above 127 in the ANSI table. (See the Microsoft 
Windows 3.0 Manual, pg. 568 for a complete ANSI character set listing)


-- Micrografx Designer 3.1 / Micrografx Charisma 2.1 - MGXIMP.FLT (.DRW)
Importfilter for Micrografx Designer v.3.1 and Charisma v.2.1


-- Excel Chart Import Filter - CHARTIMP.FLT (.XLC)
This filter was revised after PageMaker 4.0 was released to correct 
problems when using the filter with Persuasion 2.0.  This filter was 
included with Persuasion 2.0.


-- Excel Spreadsheet v. 2.2 and 3.0 Import Filter - EXCELIMP.FLT (.XLS)
This filter has been expanded to allow for support of Persuasion's ability
to handle more columns than PageMaker.  PageMaker has a limit of 40 columns 
(there are a maximum number of 40 tabs in a line of PageMaker text).  The 
column limit in Persuasion is 256.  The filter will automatically determine 
how many columns can be supported depending on which application is 
accessing the filter.

The following options apply only to PageMaker:

Two new options, "Apply XLS style" and "Read tags," have been added to the 
Excel import procedure.   To use styles created in Excel 3.0, leave "Read 
tags" unchecked in the "Place file" dialog box when you select the Excel 
file you want to place, and make sure "Apply XLS style" is checked in the 
"Place an Excel Range:" dialog box.  If both options are checked, the 
"Read tags" option will override the "Apply XLS style" option.  If you 
choose to use PageMaker's paragraph styles instead, first verify that the 
style tags (for example, <Heading>) you use in your Excel file are 
identical to the style names you are using in PageMaker.  Then, when you 
place the file, select "Read tags" in the "Place file" dialog box, and make 
sure "Apply XLS style" is unchecked in the "Place an Excel Range:" dialog 
box.  

For more information on using Style Tags, see page 230 in the PageMaker 4.0 
Reference Manual.

When you import an Excel range as a graphic, the specified range for the 
"Range" option in the "Place an Excel Range:" dialog box is limited to 70 
columns by 70 rows, assuming a normal (unchanged) column width and row 
height.  When you import it as text, the range must be limited to 40 
columns because this is the maximum number of tabs per line that PageMaker 
supports.  Persuasion supports 256 columns and rows.

   NOTE: Graphics created using the first release of Excel 3.0 are 
         imported more slowly than Excel 2.x graphics.

This filter does import colors created using [COLOR n] setting in Excel 
3.0.  The values for "n" (1-16) refer to the 16 colors available from the 
color palette.   But this filter does not import colors created using the 
[condition value] setting.  Both features are described on page 193 of 
your Excel 3.0 user manual.

This filter does not import fraction number formats (#?/?, #??/??) from 
Excel.  For instance, the fraction 4/7 will not be converted to either 4/7 
or its decimal equivalent, but to 0/1.


-- DCA/RFT Import Filter - DCAIMP.FLT (.DCA, .RFT)
This filter contains a slight modification that improves the placement of 
some Revisable Form Text (DCA) files.  Previously it was assumed that a 
space character always accompanied the 'soft return' character found at the 
end of each line.  Some applications, such as AdvanceWrite, DisplayWrite 
and SmartWare, now write out DCA files that contain only a soft return.  
Consequently these files would place into PageMaker without the necessary 
space character between words.  The filter now accommodates both variations 
and a space is inserted when necessary.


-- Lotus 1-2-3 Import Filter - 123IMP.FLT (.WKS, .WK1, .WK3)
This filter has been expanded to allow for support of Persuasion's ability
to handle more columns than PageMaker.  PageMaker has a limit of 40 columns 
(there are a maximum number of 40 tabs in a line of PageMaker text).  The 
column limit in Persuasion is 256.  The filter will automatically determine 
how many columns can be supported depending on which application is 
accessing the filter.

The following options apply only to PageMaker:
Two new options, "Apply WKS style" and "Read tags," have been added to the 
Lotus import procedure.   To use the Lotus WKS style, leave "Read tags" 
unchecked in the "Place file" dialog box when you select the Lotus file 
you want to place, and make sure "Apply WKS style" is checked in the 
"Place a Lotus 123 or Symphony Range:" dialog box.  If both options are 
checked, the "Read tags" option will override the "Apply WKS style" option. 
If you choose to use PageMaker's paragraph styles instead, first verify 
that the style tags (for example, <Heading>) you use in your Lotus file 
are identical to the style names you are using in PageMaker.  Then, when 
you place the file, select "Read tags" in the "Place file" dialog box, and 
make sure "Apply WKS style" is unchecked in the "Place a Lotus 123 or 
Symphony Range:" dialog box.  

For more information on using Style Tags, see page 230 in the PageMaker 4.0 
Reference Manual.


-- Table Editor Import Filter - TEIMP.FLT (.TBL)
This filter was revised to solve a problem when printing multiple tables on 
a page to a non-PostScript printer.  Due to a banding problem, the tables 
would be repeated.  This new filter correctly prints multiple tables to 
non-PostScript printers.

Note: Shades applied to Table Editor cells do not always print as expected 
to PostScript printers when placing tables in their native .TBL format 
using this filter.  They may print darker and with hatching patterns, 
especially to high resolution printers.  To correct this, export your table 
as a Windows Metafile (.WMF) and place that metafile through the .WMF 
import filter.


-- Word for Windows 1.x Import Filter - WINWDIMP.FLT (.DOC)
This filter was revised to solve a problem that occurred when importing
long documents and it now supports documents saved in the Word for Windows 
1.0 format from Word for Windows 2.0.  This filter does not support Word 
for Windows 2.0 - please see the entry later in this file for information 
on placing Word for Windows 2.0 files.


-- WordPerfect 5.1 for DOS/Windows Import Filter - WP5IMP.FLT (.WP5)
Version support:  This filter supports WordPerfect for DOS versions 5.0 and 
5.1 and the new WordPerfect for Windows version 5.1.  It was written to 
best support the file formats created by versions of WordPerfect for DOS 
5.1 with release dates of 12/31/90 and later and versions of WordPerfect 
for Windows 5.1 with release dates of 11/4/91 and later.

Face name mapping:  This new filter will query the current target printer
used in PageMaker to determine which face name should be used to 
replace a face name used in the WordPerfect file.  If a user uses the same
target printer as he used in his WordPerfect document file, all face
names should be retained after importing.

Better table importing:  A hard return is now inserted after each row of
a table and a tab key is inserted between cells.  

Better indent handling:  An indent key pressed at the very beginning of a
paragraph will be imported as changing both the left and right margins on 
subsequent paragraph.  An indent key pressed in the middle of a paragraph
will be imported as a tab key.

Cyrillic characters translation:  The new filter supports the WordPerfect 
Cyrillic character set (character set 10).  In order to take advantage of 
this feature you need to be using the Cyrillic version of Windows and fonts 
that conform to Microsoft's Cyrillic Windows 3.1 Character Set (CP1251).


-- WordPerfect 5.0/5.1 Export Filter - WP5EXP.FLT (.WP5)
The WordPerfect export filter has been updated to export the complete ANSI 
character set (not all characters in the ANSI character set are supported 
by WordPerfect).  This filter was revised after Persuasion 2.0 was 
released.  See Appendix B of the Microsoft Windows 3.0 User's Guide for a 
chart of ANSI characters.  Refer to the WordPerfect manual for a listing of 
WordPerfect characters and character 
sets.

-- Ventura Publisher Import Filter - VPIMP.FLT (.CHP)
Supported versions:  The Ventura Publisher import filter is for use by 
PageMaker only and is NOT compatible with Persuasion.  This import filter 
lets you import chapters from both the Windows 3.0 and GEM 3.0 versions of 
Ventura Publisher.

Ventura Chapters:  A typical Ventura Chapter (.CHP file) is comprised 
mainly of pointers to additional, external files.  For example, a chapter 
file may point to a style file (.STY) and numerous text documents (.TXT, 
.DOC, .CAP, etc.).  To properly import a Ventura chapter (.CHP) into 
PageMaker, the filter must have access to all of these external files, in 
addition to the .CHP file.  To use this filter, you select the .CHP file in 
PageMaker's 'Place' dialog box.  The filter will then examine the .CHP file 
and display a list of text documents pointed to by the chapter.  Only ASCII 
files pointed to by the chapter are supported by this filter.  No other 
word processor formats are supported and nothing but ASCII files can be 
extracted from within a .CHP file.

Converting other formats to ASCII:  Other word processor files (such as 
WordPerfect files) that have been placed in a Ventura Chapter can be 
converted to ASCII files by using Ventura's "File Type/Rename..." command. 
To do this, run Ventura Publisher and open your chapter.  Select the frame 
containing the text you wish to convert and choose "File Type/Rename..." 
from the Frame menu.  Choose ASCII from the text format list and give the 
file a .TXT extension.  Click OK.  That text can now be placed into 
PageMaker through the Ventura .CHP import filter.  Ventura captions (.CAP 
files) are stored as ASCII files and can be imported without conversion.

Formatting:  The Ventura import filter reads and interprets the Style 
Sheets referenced by a Ventura chapter.  These styles are applied to the 
ASCII files that are imported and allow almost all of the character and 
paragraph formatting applied to the text to be retained in PageMaker.  The 
filter does not import the page layout from Ventura (e.g. three column 
format), nor does it support graphics.  GEM Paint and GEM Draw graphics can 
be converted into formats that are compatible with PageMaker by using a 
conversion utility, such as Micrografx XPort or Hijaak from Inset systems. 

The filter supports the following type attributes: type face, type size, 
bold, italic, underline, superscript, and subscript.  This filter supports 
the following paragraph attributes: line spacing, paragraph spacing, left, 
right, center and decimal tabs, indents and alignment.  

Styles:  If you import a Ventura chapter that uses a style tag which has 
the same name as a style in PageMaker, PageMaker will not import the 
Ventura style specifications but will instead use the specifications in the 
existing PageMaker style.  If you wish to import the Ventura style instead, 
delete the style from within PageMaker first, and then place the Ventura 
file.  The Ventura filter will bring in all of the type faces (up to a 
maximum of 30) listed in the .WID file associated with the chapter's style 
sheet and will add them to the current font list in the publication.  If 
the filter cannot find a .WID file, question marks ('?') may appear in the 
Type Specs menu.

Import Dialog:  The Ventura import dialog box works very much like the 
PageMaker 4.0 Story importer dialog that is described on page 13 of the 
PageMaker Supplement.  The filter allows you to individually view and 
selectively import stories from Ventura Chapters.  If you select more than 
one story to import they will place into PageMaker as one continuous story.


-- Word for Windows 2.0 Import Filter - WNWD2IMP.FLT (.DOC)
Version support:  The filter only supports Word for Windows 2.0.  It is not 
backward compatible with Word for Windows 1.x and does not support OS/2 
Word.  Use the Word for Windows 1.x filter described earlier in this 
package instead.

Colors:  The eight new color names (Dark Blue, Dark Cyan, Dark Green, Dark 
Magenta, Dark Red, Dark Yellow, Dark Gray and Light Gray) added to Word for 
Windows 2.0 are now supported.  

Password protection:  Word for Windows 2.0 allows files to be password 
protected.  This filter will display a dialog requesting the password if a 
file is protected.  An invalid password or no password at all will cause an 
error message box to display, and the import to be cancelled.  

Symbols:  The filter supports symbols added via the "Insert Symbol" menu 
option.  

Revision marks:  The revision mark delete character is mapped to a 
strikethru character.  

Embedded objects:  Inserted objects, e.g., Equations, WordArt, Microsoft 
Graph, from Word for Windows 2.0, are imported as inline Windows Metafiles.
Equations from Word for Windows 2.0, though normally generated using 
subscripts, are imported without the subscript applied.  This improves the 
placement and appearance of the equations in PageMaker and Persuasion.  
Objects pasted into Word for Windows 2.0 using "Paste Special..." will 
import as either an inline metafile, an inline bitmap or as a table 
according to the options chosen.  Note that a Word document inserted back 
into another Word documents will import as the Word icon graphic.  This is 
in accordance with Microsoft's design.

Borders:  This filter recognizes different width, color, line type and 
offset attributes for above and below borders (rules).  Only paragraph-
level borders are imported as Paragraph rules.  Picture and table cell 
borders are ignored.


-- XyWrite III Import Filter - XY3IMP.FLT (.XYW, .XY3)
The XyWrite III import filter, by XyQuest Inc., lets you import files that 
are compatible with XyWrite version 3.54.  This filter now supports XyWrite 
style sheets.  The filter supports the following type attributes: bold, 
italic, underline, superscript, and subscript.  XyWrite III's reverse type 
option carries over to PageMaker as italic.  XyWrite III's bold-underline 
option carries over to PageMaker as underline.  This filter supports the 
following paragraph attributes: left, right, center and decimal tabs; 
paragraph indents; and left, right, center and justified paragraph 
alignment.  XyWrite III's indent paragraph (IP) command sets left and 
first-line indents that carry over to PageMaker.  Set all other indents in 
PageMaker or Persuasion.  Footnotes are also supported by the filter and 
are imported as endnotes.

The import filter converts only embedded, not default, commands. Therefore, 
if you have any formatting commands set up as defaults, you must embed them 
in your document if you want PageMaker to honor them.

The XyWrite import and export filters for PageMaker are written by XyQuest. 
Updates may be requested through XyQuest's Technical Support Department.


-- XyWrite III Export Filter - XY3IMP.FLT (.XY3)
The XyWrite III export filter, by XyQuest Inc., lets you export text 
stories from PageMaker into files compatible with XyWrite version 3.54.

The XyWrite import and export filters for PageMaker are written by XyQuest. 
Updates may be requested through XyQuest's Technical Support Department.








