Step 5: Configure your TCP/IP Protocol for Dynamic IP



Now that the driver is installed, you need to configure it so it will work
with Windows 95. Go to the Control Panel and double-click the Network icon.
You should get a dialog box like this.

Click on the TCP/IP protocol (highlighted in the picture) and press the
Properties... button. You should get the TCP/IP Properties box.

There are six sections in this dialog box. We'll deal with them in order.
In each case, you can click on the section title to get a picture of the
dialog box with the correct options selected.

IP Address

Select the Obtain an IP address automatically option. Note: If you obtain
your IP address from a Windows NT DHCP server, Netscape will no longer get
the gateway or DNS server IP address from the information set up under the
Network options. The DHCP server options on the NT machine need to specify
the DNS server IP Address and set the router address to your gateway.

WINS Configuration

Select the Disable WINS Resolution option for now, you can enable it later
when you want to run peer to peer networking.

Gateway

Type in the gateway for your access provider. If you were using Trumpet
Winsock, this number is the Default Gateway value in the Trumpet Winsock
Setup dialog box. Once you've entered this number, press the Add button.

Bindings

By default, the Client for Microsoft Networks option is checked. Leave it
alone.

Advanced

No changes needed are from the default.

DNS Configuration

This is probably what has been giving you the most trouble. Select the
Enable DNS option. This stands for Domain Name Service. Enter your user
name in the Host box. In the Domain, put in the name of your provider, like
abc.com or partyon.com or whatever.

In the DNS Server Search Order section, put in the IP address of your
provider's name server and press the Add button. To find this number, you
can log into your provider with a Windows terminal and type nslookup. Your
provider's server will return the DNS address. If that doesn't work, try
128.95.1.4. That's the Microsoft default. If you were previously using
Trumpet Winsock, the DNS is the Name server value in the Trumpet Winsock
Setup dialog box.

In the Domain Suffix Search Order section, type in the domain suffix
(usually the same as the domain) and press the Add button. If you were
using Trumpet Winsock, this is the Domain Suffix value in the Trumpet
Winsock Setup dialog box.

When you're all done setting these options, press the OK button. Then press
the OK button in the Network dialog box. Windows 95 will ask you to reboot.
Press Yes and run to the fridge for a quick snack. You're almost done!

---------------------------------------------------------------------------

Step 6: Set up the Connection Icon



Open up My Computer from the desktop and double-click the Dial-Up
Networking icon. Double-click the Make New Connection icon. This will walk
you through the Make New Connection wizard. The first dialog box looks like
this.

Type in "SLIP Access", or "Internet Connection", or whatever you want to
call the icon you're about to create to connect you to your provider (the
title won't affect the type of connection). Your modem (which should have
been configured when you installed Windows 95) should be shown in the
Select a modem: area. Press the Configure button and you'll get a dialog
box that looks like this.

In the General section, Crank up your modem speed to as fast as you think
it will go. If you have a 14.4K modem, for example, make the maximum speed
57600. DO NOT, however, select Only connect at this speed. This will let
your modem adjust as the connection needs.

Don't worry about the Connection section, the defaults should be fine.

Next, select the Options section. MAKE SURE you check the Bring up terminal
window after dialing box, as shown in this picture. This is extremely
important! Then hit the OK button.

Click the Next > button in the Make New Connection wizard. Enter in the
phone number of your access provider. You don't need to put in an area code
if it's a local call. You may want to put in *70, (with the comma) if you
have Call Waiting. This will disable it for this call only.

Press the Finish button and your icon will be created. Your Dial-Up
Networking folder should now look something like this.

---------------------------------------------------------------------------

Step 7: Setting the Dial-Up Properties



Select your newly-created connection icon, press the right mouse button and
choose Properties... You should get a dialog box named whatever name you
gave your icon (I gave mine the name of Dial-up SLIP), which looks like
this.

Press the Server Type... button. You'll get the Server Types dialog box. It
should look like this, with your newly-created icon in the folder.

In the Type of Dial-Up Server section, press the down arrow to drop down
the list box. Choose either CSLIP or SLIP, depending on whether or not your
access provider has IP header compression. They probably do, so try CSLIP
first if you're not sure. You may have to scroll the list box up to find
CSLIP. The list box options look like this.

Make sure that Log on to network in the Advanced options: section IS NOT
checked. Also, make sure that TCP/IP in the Allowed network protocols:
section IS checked. Then press the OK button.

Hit the OK button in the remaining dialog box, and you're almost ready to
dial!

---------------------------------------------------------------------------

Step 8: Configure Dial-Up Networking to Automatically Redial a Busy Number



Since most ISP phone numbers are CONSTANTLY busy, you should configure your
dial-up sessions to automatically redial when they encounter a busy signal.
From the Dial-Up Networking folder, select the Connections... menu item,
then the Settings... option. From there, you can choose the number of times
you would like your dial-up sessions to attempt connection.

---------------------------------------------------------------------------

Step 9: Dialing in and Getting Connected



Double-click your session icon that you recently made. You'll get the
Connect To dialog, which looks like this, except that your user name will
be in the appropriate text area. Usually, however, the UNIX machines that
most Internet providers use will not read this information via a SLIP
connection, so you can delete it out of the text areas. You'll have to type
it in later anyway.

Press the Connect button and your modem should start dialing. After a few
rings, your provider's host machine should answer. After the handshaking
signals, a Post-dial terminal window will appear. It will probably look
somewhat like this.

Enter your user name and press ENTER. Then enter your password and press
ENTER. You should get a message on the screen saying something like SLIP
session from (xxx.xxx.xxx.xxx) to xxx.xxx.xxx.xxx beginning.... My
connection message looks like this.

MAKE SURE YOU WRITE DOWN OR REMEMBER THE NUMBER IT'S CONNECTING TO
Depending on your provider, your screen may look different, or may ask for
the type of connection you wish to make. You can type SLIP if that is the
case. If you're not sure, check with your provider.

Press F7 or click the Continue (F7) button. You'll get a SLIP Connection IP
Address dialog. It looks like this. Enter in the number that the terminal
window displayed as connecting to.

Click the OK button, and you should be connected! If all went well, you'll
see a Connected to Dial-up SLIP dialog box like this one. Go ahead and fire
up those 32-bit Winsock apps! You can get the latest Windows 95 apps from
my 32-bit Shareware Collection. If you think everything is set up up
correctly, but you're still having problems, try the WINHQ Windows 95
Internet Troubleshooting Tips.

---------------------------------------------------------------------------

Adding Scripting Capability



Now that you're up and running, you may want to try adding scripting
capability if your ISP makes you type in your username and password each
time to login. For information on scripting your dial-up connections, try
the WINHQ Dial-up Scripting Page.

---------------------------------------------------------------------------
Send fan mail or small, unmarked bills to:
  stevej@mwci.net


1995 Steve Jenkins of WebSavvy
Microsoft, MS, MS-DOS, Windows, Windows NT, Windows 95, and the Windows
logo are either registered trademarks or trademarks of Microsoft
Corporation in the United States and or/other countries. Microsoft
Corporation in no way endorses or is affiliated with The Windows 95
InterNetworking Headquarters
