  Works for Windows Version 2.0a - 1 of 4

NOTICE!:  You must be running MSCDEX.EXE version 2.23 or higher to obtain a
          copy of this update.

*** Requires High Density Disk ***

The 2.0a version of Microsoft Works corrects the bugs found in the
2.0 version of this program. The most significant correction in the
2.0a version is that of default fonts where the user can now print on
a Dot Matrix Printer without having to change the font type from
within the program. Out of memory errors while printing have been
eliminated in this version of the program.


This is DISK 1 of a four disk set.

This disk contains the following files--

   MSSPELL.DL$    MSSP_AM.LE$    THESAUR.DL$    THESAUR.LE$
   CGMIMP.FL$     PCXIMP.FL$     TIFFIMP.FL$    WRKSWIN.CN$
   README.TX$     WORDWIN1.CN$   WORDWIN2.CN$   WPFT5.CN$
   WRITWIN.CN$    ACCTSREC.WD$   INVENTRY.WD$   SALESREP.WK$
   HARDWARE.WP$   COLLECT.WP$    FLYER.WP$      AMORTIZE.WK$
   FINANCE.WK$    ACCOUNTS.WD$   LOGO.BM$       SETUP.EXE
   STFSETUP.INF   SETUP.INI      STFSETUP.EX$   VER.DL$
   NETWORK.INF    LABEL.TXT      README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.

NOTES:

   * Make certain that Microsoft Windows has been installed on your
     hard drive.

   * Make sure that there is approximately 4 MB of free space on your
     hard drive. Microsoft Works will require that much space.

INSTALLATION

   1.  Start up your computer.

   2.  Insert this diskette in Drive A.

   3.  At the C:\>, type--

          WIN

       and press <Enter>. The Windows Program Manager window will be
       displayed.

   4.  Insert Disk 1 of MICROSOFT WORKS FOR WINDOWS in Drive A.

   5.  Move the mouse pointer to File on menu bar at the top of the
       Program Manager window, and click once.

   6.  Move the mouse pointer to Run on the File menu, and click
       once.  A Command Line box is displayed on the screen.

   7.  Type--

          A:SETUP

       in the Command Line box and press <Enter>.

   8.  Click the Continue button in the Welcome box.

   9.  Type your name (and company name, if applicable) at the
       prompt.

   10. Click on the Continue button again. The Setup Options dialog
       box is displayed.

   11. Click the Complete Installation button. The Setup program
       installs the files on the disk in Drive A (DISK 1).

   12. Once the installation of DISK 1 is completed, you are
       prompted to insert DISK 2. Replace the disk in the A: drive
       with DISK 2 and press <Enter>.

   13. Continue responding to the prompts until files on all four
       disks are installed to the hard drive.

   14. When the Installation Complete dialog box is displayed, you
       will have two options to choose from--to either exit to
       Windows or to run Works. Select either one.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
