INSTALLING OS/2 SOUND SUPPORT


OS/2 Warp 4 includes sound support for the HP OmniBook 2000/5700, but the
built in sound drivers do not support sound in Windows sessions.  If you 
desire sound for your Windows sessions, install the OS/2 sound drivers that
ship with the OmniBook 2000/5700.

Requirements
============
     * HP OmniBook 2000/5700 with OS/2 Warp or Warp Connect Installed.

     * HP OmniBook drivers for Sound.  The drivers are located on the hard
       drive in the C:\OMNIBOOK\DRIVERS\OS2\SOUND subdirectory.  These files
       are available after finishing the selection of Windows 95 or Windows
       for Workgroups.  The drivers are also located on the HP OmniBook 
       Recovery CD in the \DRIVERS\OS2\SOUND subdirectory.

Procedure 
=========
1. Open an OS/2 Command Prompt. 

2. Goto the MMOS2 directory and type MINSTALL. 

3. Select the drive and directory containing the SOUND drivers (i.e. A:\SOUND).
 
4. Confirm that Crystal Audio and IBMOPL3 FM MIDI are selected and click [OK]. 
   (Do not install IBM MPU-401 MIDI it is built into OS/2 Warp 4.)  

5. Click on the [YES] button to accept changes to CONFIG.SYS file. 

6. Click [OK] to choose one Crystal Audio device.

7. Click [OK] to choose one IBM OPL3 FM MIDI Synthesis device. 

8. Click [OK] to confirm the CONFIG.SYS has been changed. 

9. Click [OK] and remove the diskette from drive A: then shutdown and restart
   to activate sound in Windows sessions.

