<        Installation instructions for Warp 4 FixPak XRCM015















        

        
        



        January 12, 2001

        This FixPak makes the products it services Year 2000 ready
        
        Build level 14.062
        
        This FixPak applies to:
        
        CSD Level:    XRC4000    Warp 4
        Component ID: 5639A6100
        Version:      4.00
        Type:         0C
        
        CSD Level:    XRC4010    WorkSpace On Demand Release 1
        Component ID: 5639A6100
        Version:      4.01
        Type:         0C
        
        CSD Level:    XRC4010    WorkSpace On Demand Release 2
        Component ID: 5639A6120
        Version:      4.01
        Type:         0C
        
        Requires Corrective Service Facility release f.143 or later
        
        OS/2 Fix Distribution
        Personal System Products
        Austin, Tx
        
        
        (c) Copyright International Business Machines Corporation, 1981, 1998.
        All rights Reserved.


                      January 12, 2001 - Warp 4 FixPak XRCM015


        January 12, 2001 - Warp 4 FixPak XRCM015


















































   
                                                                    Page  ii


                   January 12, 2001 - Warp 4 FixPak XRCM015

   CONTENTS


     1.0 Terms and Conditions  . . . . . . . . . . . . . . . . . . . . . . 1

     2.0 Do not use your system  . . . . . . . . . . . . . . . . . . . . . 2

     3.0 Installation Notes  . . . . . . . . . . . . . . . . . . . . . . . 3
       3.0.1 Audio CD does not play  . . . . . . . . . . . . . . . . . . . 3
       3.0.2 Out of memory or System error SYS0008 - FP13+   . . . . . . . 3
       3.0.3 Warp 4 Revision number changed  . . . . . . . . . . . . . . . 3
       3.0.4 Changes you may see due to source convergence   . . . . . . . 4
       3.0.5 Security Applications Work Around   . . . . . . . . . . . . . 4
       3.0.6 Cannot install on WSoD Release 2  . . . . . . . . . . . . . . 4
       3.0.7 New PopUps During FixPak 12 Install   . . . . . . . . . . . . 4
       3.0.8 Device Drivers removed from Fixpak  . . . . . . . . . . . . . 5
       3.0.9 Can't install Warp 4  . . . . . . . . . . . . . . . . . . . . 5
       3.0.10 Please use Fixtool f.143 or later  . . . . . . . . . . . . . 5
       3.0.11 OS2DUMP split into two versions  . . . . . . . . . . . . . . 5
       3.0.12 TRAP in ES16881$ after FP10 applied  . . . . . . . . . . . . 6
       3.0.13 System Sounds not working after FixPak applied   . . . . . . 6
       3.0.14 Using Display Recovery Choices   . . . . . . . . . . . . . . 7
       3.0.15 Installation of Java 1.1.4   . . . . . . . . . . . . . . . . 8
       3.0.16 DSPRES.DLL included in this FixPak   . . . . . . . . . . . . 8
       3.0.17 No products found  . . . . . . . . . . . . . . . . . . . . . 8
       3.0.18 Previous installation interrupted  . . . . . . . . . . . . . 9
       3.0.19 Unable to open Archive directory   . . . . . . . . . . . . . 9
       3.0.20 RC 932 doing CID install of Warp 4   . . . . . . . . . . . . 9
       3.0.21 Multimedia no longer selectable   . . . . . . . . . . . . . 11
       3.0.22 MMPARTS.DLL/USER.EXE popup during install   . . . . . . . . 11
       3.0.23 CSF0208 No products were found on the target ...    . . . . 11
       3.0.24 CSF0248 Archive path is shared between mismatched   . . . . 11
       3.0.25 CSF0249 Error opening or creating archive file.   . . . . . 11
       3.0.26 Printer installation process change   . . . . . . . . . . . 12
       3.0.27 Configuration Installation Distribution ( CID )   . . . . . 12

     4.0 Post Installation Notes  . . . . . . . . . . . . . . . . . . . . 13
       4.0.1 Enabling client updates to the WSOD 2.0 GRADD.MOD file   . . 13
       4.0.2 Print Screen SET parameter for APAR JR11837  . . . . . . . . 13
       4.0.3 New Message Box in fix for APAR JR12954  . . . . . . . . . . 14
       4.0.4 RAS file changes   . . . . . . . . . . . . . . . . . . . . . 14
       4.0.5 Setting IRQ9 processing in config.sys for VPIC.SYS   . . . . 15
       4.0.6 Windows printer drivers leave a zombie thread running  . . . 15
       4.0.7 APAR JR09494 (trap exiting WINOS2 with MWAVE audio)  . . . . 16
       4.0.8 SYS3170 installing Lotus SmartSuite 96   . . . . . . . . . . 16
       4.0.9 Intermittent hangs   . . . . . . . . . . . . . . . . . . . . 16

     5.0 New Function   . . . . . . . . . . . . . . . . . . . . . . . . . 17
     5.1 System Boot Message enhancements   . . . . . . . . . . . . . . . 17
     5.2 Intel's new SpeedStep  . . . . . . . . . . . . . . . . . . . . . 17
     5.3 New RAS Utilities added  . . . . . . . . . . . . . . . . . . . . 17

   
                                                               Contents  iii


                   January 12, 2001 - Warp 4 FixPak XRCM015

     5.4 Serviceability (RAS) Enhancements  . . . . . . . . . . . . . . . 17
     5.5 Querying file dates for files after Dec 31, 1999 in REXX   . . . 18
     5.6 Enhanced support for Workspace On-Demand   . . . . . . . . . . . 19
       5.6.1 PMLOGON user exits   . . . . . . . . . . . . . . . . . . . . 19
       5.6.2 Setup strings for public applications  . . . . . . . . . . . 21
       5.6.3 Command line options for TLOGOFF and TSHUTDWN  . . . . . . . 22
       5.6.4 PMLOGON No Progress Indicator option   . . . . . . . . . . . 22
       5.6.5 PMLOGON No System Modal Window option  . . . . . . . . . . . 23
     5.7 Euro Support   . . . . . . . . . . . . . . . . . . . . . . . . . 23
       5.7.1 Base OS/2 support  . . . . . . . . . . . . . . . . . . . . . 23
       5.7.2 Where Euro is not supported  . . . . . . . . . . . . . . . . 24
       5.7.3 Printing the Euro  . . . . . . . . . . . . . . . . . . . . . 25
     5.8 New Warp Registry Editor   . . . . . . . . . . . . . . . . . . . 25
     5.9 WorkSpace On Demand  . . . . . . . . . . . . . . . . . . . . . . 25
     5.10 IBM Open32  . . . . . . . . . . . . . . . . . . . . . . . . . . 25
     5.11 Graphics Adapter Device Drivers (GRADD)   . . . . . . . . . . . 26
     5.12 Joliet-2 support in CDFS.IFS  . . . . . . . . . . . . . . . . . 26
     5.13 New (improved) CHKDSK   . . . . . . . . . . . . . . . . . . . . 26
       5.13.1 Using the new CHKDSK  . . . . . . . . . . . . . . . . . . . 26
       5.13.2 CHKDSK log formatter  . . . . . . . . . . . . . . . . . . . 28
     5.14 Automated Trap Screen Logging   . . . . . . . . . . . . . . . . 29
       5.14.1 SUPPRESSPOPUPS  . . . . . . . . . . . . . . . . . . . . . . 29
       5.14.2 TRAPLOG   . . . . . . . . . . . . . . . . . . . . . . . . . 29
       5.14.3 TRAPDUMP  . . . . . . . . . . . . . . . . . . . . . . . . . 30
       5.14.4 SYSDUMP   . . . . . . . . . . . . . . . . . . . . . . . . . 30
     5.15 REXX New Fuction  . . . . . . . . . . . . . . . . . . . . . . . 31
     5.16 Other README files  . . . . . . . . . . . . . . . . . . . . . . 31

     6.0 Corrective Service Facility  . . . . . . . . . . . . . . . . . . 32
       6.0.1 Required CSF level   . . . . . . . . . . . . . . . . . . . . 32
       6.0.2 Where you can find CSF code  . . . . . . . . . . . . . . . . 32
       6.0.3 Creating FixPak diskettes  . . . . . . . . . . . . . . . . . 33
     6.1 Residual FixPak files from OS/2 2.11 or Warp 3   . . . . . . . . 33
     6.2 Read-Only files  . . . . . . . . . . . . . . . . . . . . . . . . 34
     6.3 SYSLEVEL file locations  . . . . . . . . . . . . . . . . . . . . 34
     6.4 Relocated OS/2 file support  . . . . . . . . . . . . . . . . . . 35

     7.0 Installation Process   . . . . . . . . . . . . . . . . . . . . . 37
     7.1 Before installation  . . . . . . . . . . . . . . . . . . . . . . 37
     7.2 Method 1: Install from booted OS/2 partition.    . . . . . . . . 37
     7.3 Method 2: Install from alternate bootable media  . . . . . . . . 38
     7.4 Additional Corrective Service Facility information   . . . . . . 39

     8.0 CSD level of SYSLEVEL.OS2  . . . . . . . . . . . . . . . . . . . 40
       8.0.1 New SYSLEVEL.FPK   . . . . . . . . . . . . . . . . . . . . . 41

     9.0 FixPak Corrective Service levels and disk layouts  . . . . . . . 42

     10.0 Space Utilization   . . . . . . . . . . . . . . . . . . . . . . 57
       10.0.1 Recovering FixPak ARCHIVE and BACKUP space  . . . . . . . . 57
       10.0.2 TRADEMARKS  . . . . . . . . . . . . . . . . . . . . . . . . 58

   
                                                                Contents  iv


                   January 12, 2001 - Warp 4 FixPak XRCM015

   1.0 TERMS AND CONDITIONS

   Important - please read the following terms and conditions.

   Downloading the Service Fixes included in FixPak XRCM015 for OS/2 Warp 4
   indicates your acceptance of the following terms and conditions:

   1. You must be, and agree that you are, a current licensee of OS/2 Warp
      4.
   2. You may make copies of the OS/2 Service Fixes equal to the number of
      licensed copies of OS/2 Warp 4 you possess.
   3. You may only use the OS/2 Warp 4 Service Fixes included with FixPak
      XRCM015 for maintenance purposes.
   4. All other terms and conditions of your OS/2 Warp 4 license agreements
      apply to the Service Fixes; however, this does not extend any warranty
      and/or services, including but not limited to the "Initial
      Installation" period, outlined in such agreements.



































   
                                                     Terms and Conditions  1


                   January 12, 2001 - Warp 4 FixPak XRCM015

   2.0 DO NOT USE YOUR SYSTEM

   Once you begin a FixPak installation, do not try to use your system for
   any other purpose. Doing so may yield unexpected problems which can cause
   the FixPak installation to fail.















































   
                                                   Do not use your system  2


                   January 12, 2001 - Warp 4 FixPak XRCM015

   3.0 INSTALLATION NOTES



   3.0.1 AUDIO CD DOES NOT PLAY

   On some systems, after installing Warp 4 FixPak XR_M014, your audio CD
   may no longer play. The Multimedia CD applet will display a message with
   a RC of 5060. To correct this problem, perform the following steps :

   1. Right mouse click on your desktop.
   2. Left mouse click on System setup.
   3. Double left mouse click on the Multimedia Setup icon.
   4. Left mouse click on the Compact Disc tab.
   5. Left mouse click on "+" sign in the right corner.
   6. Change the Drive Letter to the Drive Letter where your CD is located.
   7. Save change.

    Your CD should now be able to play CDs.


   3.0.2 OUT OF MEMORY OR SYSTEM ERROR SYS0008 - FP13+

   Customers who have had an "Out of memory" or SYS0008 problems on systems
   using Java should add the following line to the CONFIG.SYS file:

   þ  SET JAVA_HIGH_MEMORY=1

   This will allow Java to move it't buffers to a lesser-used region of
   memory and may alleviate some memory constraints. There are no known
   unwanted side-effects to doing this.


   3.0.3 WARP 4 REVISION NUMBER CHANGED

   As of FixPak XR_M013 we've converged the souce lines with Warp Server for
   e-business. This is what causes the initial boot screen to display as
   14.040_W4 and the internal version to be reported as 4.50 as well. Some
   program might interpret this as you not running the correct version of
   OS/2.

   If this occurs, please use OS2VER to set the proper version number to be
   reported to the program.

   To do so, you must edit a SYSTEM HIDDEN READONLY file, OS2VER, in the
   root of the boot drive. Then add a line in the format of 40=executable
   file name and save the file and reset the attributes.

   Note: To unhide the file OS2VER, perform the following steps:

   1. Open an OS/2 window.

   
                                                       Installation Notes  3


                   January 12, 2001 - Warp 4 FixPak XRCM015

   2. Change to drive letter where OS/2 is installed.
   3. Enter "cd\" to get to the root directory.
   4. Enter OS/2 command "attrib -s -h -r os2ver" to unhide OS2VER.
   5. Edit OS2VER to add line above ; save
   6. Enter OS/2 command "attrib +r +s +h os2ver" to hide OS2VER.
   7. Reboot system.



   3.0.4 CHANGES YOU MAY SEE DUE TO SOURCE CONVERGENCE

   Due to the Source Line convergence for OS/2 Warp 4 with the Warp Server
   for e-Business source code, you might see references to Warp Server for
   e-business being reported by some device drivers or executables. This is
   not a problem and may be ignored.


   3.0.5 SECURITY APPLICATIONS WORK AROUND

   Users of some security-related ISS (security) packages such as Utimaco's
   SafeGuard Professional, will have to add a new line to config.sys:

   þ  FAKEISS=YES

   This works around a limitiation of some legacy ISS drivers. This is not a
   problem for the Tivoli ISS driver.


   3.0.6 CANNOT INSTALL ON WSOD RELEASE 2

   If you get a message stating "No products found to service" when trying
   to install on WorkSpace on-Demand Release 2, you may have a corrupted
   syslevel.os2 file.  Copy the syslevel.os2 file from the installation CD
   or from a working WSoD R2 system and retry the installation.  Be sure to
   use Fixtool 1.42 to service your WSoD R2 system.  This will prevent the
   syslevel.os2 file corruption.  Previous versions of the Fixtool fail to
   correct a problem with the previous CSD level field in the syslevel.os2
   file.


   3.0.7 NEW POPUPS DURING FIXPAK 12 INSTALL

   If you get a popup for module VIOTBL.ISO, VIOTBL.DCP, BDIME.DLL, or
   COUNTRY.SYS during installation of this FixPak, reply "OK" to replace
   these modules with the ones in this FixPak.







   
                                                       Installation Notes  4


                   January 12, 2001 - Warp 4 FixPak XRCM015

   3.0.8 DEVICE DRIVERS REMOVED FROM FIXPAK

    Beginning with Warp 4 FixPak XR_M011 and Warp 3 FixPak 41, most OS/2
    Device Drivers have been moved to a separate Device Driver FixPak. The
   first
    Device Driver FixPak, XR_D001, is now available where this FixPak is
    available.


   3.0.9 CAN'T INSTALL WARP 4

   If you can't get Warp 4 installed, check the OS/2 Device Driver Pak
   Online at:

   http://service.software.ibm.com/os2ddpak/readme.htm#disk1


   for the latest available device drivers to update your Installation disks
   with.


   3.0.10 PLEASE USE FIXTOOL F.143 OR LATER

   Beginning with Warp 3 FixPak 40 and Warp 4 FixPak 10, you must use
   Corrective Service Facility f.143 or later.  It has fixes for problems
   found in previous CSF builds as well as a fix to support RIPL servers
   where there may be in excess of 250 SYSLEVEL files. It also handles the
   type 1 (All FixPaks prior to 10 and 40) and type 2 (FixPaks 10 and 40 and
   later) FixPaks.

   If you try to use a CSF level prior to f.143 you will get a "CSF0208 No
   products were found on the target system to service" message.


   3.0.11 OS2DUMP SPLIT INTO TWO VERSIONS

   OS2Dump has been split into two versions. If you are installing this
   fixpak on PS/2 model 9595 machines, use the version located on the last
   fixpak diskette.  Also, if you are running older hardware (486s or early
   Pentiums), you may wish to use the OS2Dump located on the last fixpak
   diskette.

   We have encountered some problems with early implementations of the PCI
   Bus BIOS extensions (INT 1A) on certain processors and BIOS levels. We
   are not sure how many different machines and BIOSes are affected. We do
   know many of the PS/2 model 9595s have the problem. The end result of
   this is that the version of OS2Dump which supports PCI Bus machines does
   not work on some older hardware.  In order to continue to support the
   full range of hardware that OS/2 runs on, we have divided OS2Dump into a
   PCI version and an non-PCI version. If you are running fairly recent
   hardware, the PCI version of OS2Dump will work on your machine whether or

   
                                                       Installation Notes  5


                   January 12, 2001 - Warp 4 FixPak XRCM015

   not it has a PCI bus. All BIOS problems have been worked out.

   To reiterate, the problem occurs only on older hardware. If you are
   running a 486 or early Pentium (P60 or less), you may wish to use the
   non-PCI version located on the last fixpak diskette. If you are running a
   9595, you must use the non-PCI version located on the last fixpak
   diskette.

    If, after installing this FixPak, you encounter problems taking a
   standalone dump and your system fits description above, perform the
   following steps to install the non-PCI version of OS2DUMP located on last
   disk of this FixPak:

   1. Open an OS/2 window.
   2. Change to drive letter where OS/2 is installed.
   3. Enter "cd\" to get to the root directory.
   4. Enter OS/2 command "attrib -s -h -r os2dump" to unhide OS2DUMP.
   5. Enter "ren os2dump os2dump.pci"; save PCI version of OS2DUMP.
   6. Insert last disk of FixPak in drive A.
   7. Copy a:\os2dump
   8. Enter OS/2 command "attrib +r +s +h os2dump" to hide OS2DUMP.
   9. Reboot system.



   3.0.12 TRAP IN ES16881$ AFTER FP10 APPLIED

   We do not ship any of the ESS sound card drivers in this Fixpak.  To
   corrrect the problem, get the latest ESS device driver for your card from
   the OS/2 Device Driver Pak online at

   http://service.software.ibm.com/os2ddpak/html/multimed/esstechn


   Do this before you install the FixPak.


   3.0.13 SYSTEM SOUNDS NOT WORKING AFTER FIXPAK APPLIED

   If, after applying a FixPak, your System Sounds no longer work or you get
   an error message stating "Error in closing CD device:  Invalid device ID
   given" when you close the CD Player, it may be caused by the FixPak
   replacing the following files in your MMOS2 directory tree:

      \MMOS2\DLL\DIVE.DLL
      \MMOS2\DLL\MMPM.DLL
      \MMOS2\DLL\MPGIO.DLL
      \MMOS2\SSMDD.SYS
      \MMOS2\DLL\SVMC.DLL
      \MMOS2\DLL\SVSH.DLL


   
                                                       Installation Notes  6


                   January 12, 2001 - Warp 4 FixPak XRCM015

   To recover, restore these files from your FixPak Backup or Archive
   directory.

   1. Boot from another partition, your Installation or Utility disks.
   2. Rename the existing files in the MMOS2 directory tree so they will not
      be overlayed when you restore the older files.
   3. Change to the FixPak Backup directory if there is one. If not then
      change to the FixPak Archive directory.

      Note: The names may not be Backup or Archive. They will be whatever
      you called them when you applied a FixPak.
   4. For each of the above files, enter

      UNPACK source target

      Where "source" is the filename.ext of the file in the Backup or Archive
                     directory, like DIVE.DL_ or SSMDD.SY_
            "target" is the fully qualified path of where to place the file,
                     like C:\MMOS2\DLL or C:\MMOS2


   5. Repeat for each of the above files
   6. Reboot your system. This resolved the problem on a TP760 and may also
      resolve the problem on other hardware.



   3.0.14 USING DISPLAY RECOVERY CHOICES

   If you have the "Display Recovery Choices at each system startup"
   function active on your system, you need to disable it before you apply a
   FixPak if

   þ  The system is running
   þ  The boot partition will be serviced.

   The problem with using this function is that the Corrective Service
   Facility (CSF) updates the current CONFIG.SYS with entries to run the
   Locked File Device Driver (LFDD) the next time you boot the system. This
   is done to replace files that are currently in use (locked) by the
   system.

   The Recovery choices function replaces the current CONFIG.SYS with the
   one that is associated with the recovery choice you select, wiping out
   the LFDD entries. This means the LFDD does not run at boot time and the
   deferred files will not get updated, therefore the FixPak does not get
   completely applied.

   Note: It is not necessary to disable this function if you install a
   FixPak by booting from the CSF disks or from another OS/2 partition.


   
                                                       Installation Notes  7


                   January 12, 2001 - Warp 4 FixPak XRCM015

   3.0.15 INSTALLATION OF JAVA 1.1.4

   Installation of Java 1.1.4 on top of this FixPak will down-level portions
   of the ULS support. If this occurs, Euro currency support will not work
   correctly.  To recover, re-install this FixPak. This will allow both Java
   1.1.4 and Euro support to work correctly.


   3.0.16 DSPRES.DLL INCLUDED IN THIS FIXPAK

   DSPRES.DLL has been added to this FixPak for support for Euro character
   display. This file can sometimes be overwritten by video device driver
   installation. If this occurs, an updated version is located in
   \OS2\INSTALL\VGA. This updated file can be copied into the \OS2\DLL
   directory.


   3.0.17 NO PRODUCTS FOUND

   If you see a "No products were found on the target system to service"
   message while applying this FixPak, there is probably a mismatch between
   the data in \OS2\INSTALL\SYSLEVEL.OS2 and what is supported by this
   FixPak.

   Compare the data for the OS/2 Base Operating System from the SYSLEVEL
   command output with the same values listed at the end of this document in
   the "FixPak Corrective Service levels and disk layouts" section. They
   must be identical.

   If these values are correct, check for the following files on any OS/2
   boot drive in the \OS2\INSTALL directory.

      LOGF0000.OS2
      LOGSTART.OS2
      LOGARCH.OS2


   Check for the following files in your MMOS2\INSTALL directory.

      LOGF0000.MPM
      LOGSTART.MPM
      LOGARCH.MPM


   Also check for the following file:

      C:\CSF_SEL.000


   If these files exist, rename them and try the FixPak installation again.
   Delete the renamed files after the FixPak has been applied.

   
                                                       Installation Notes  8


                   January 12, 2001 - Warp 4 FixPak XRCM015

   3.0.18 PREVIOUS INSTALLATION INTERRUPTED

   If you get a message that the previous installation of a FixPak was
   interrupted (whether true or not), check for the following files and
   directory on all drives:

     Files:
        FIXSTART
        IBMCSFLK.LST
        IBMCSFLK.CSF
        CSF_*

     Directory:
        IBMCSFLK


   If any exist, rename them and try the FixPak installation again.  Delete
   the renamed files after the FixPak has been applied.


   3.0.19 UNABLE TO OPEN ARCHIVE DIRECTORY

   If you get a message about problems with the Archive directory (for
   example, cannot find or unable to open), then the most probable cause is
   that you applied a previous FixPak and have since deleted the FixPak
   ARCHIVE or BACKUP directory.

   To recover from this, follow the "No files to service" and "Previous
   installation interrupted" steps listed above.


   3.0.20 RC 932 DOING CID INSTALL OF WARP 4

   If you get a RC (Return Code) 932 while doing a CID install of Warp 4 and
   you are using RSPINST.EXE from FixPak 3 or later, you will need to do the
   following.

   1. Create a temporary work directory somewhere on your harddrive.

         assume it's c:\tempwork


   2. Locate the section called "FixPak Corrective Service levels and disk
      layouts".
   3. Locate CHKDSK.SYS, CHKDSK32.DLL, CHKDSK32.EXE  and UHPFS.DLL and
      record what disks they are found on.

      Note: For FixPak 3, they are on disks 12, 8, 12 and 9 respectively.
      This will change for later FixPaks.



   
                                                       Installation Notes  9


                   January 12, 2001 - Warp 4 FixPak XRCM015

   4. Place FixPak disk 12 in A: and enter

         unpack a:\fix\os2.1\chkdsk.sy_ c:\tempwork


   5. Place FixPak disk  8 in A: and enter

         unpack a:\fix\os2.1\chkdsk32.dl_ c:\tempwork


   6. Place FixPak disk 12 in A: and enter

         unpack a:\fix\os2.1\chkdsk32.ex_ c:\tempwork


   7. Place FixPak disk  9 in A: and enter

         unpack a:\fix\os2.1\uhpfs.dl_ c:\tempwork


   8. Make backup copies of CHKDSK.SYS, CHKDSK32.DLL and UHPFS.DLL from the
      DISK_3 directory of your CID tree.
   9. Copy CHKDSK.SYS from c:\tempwork to the DISK_3 directory of your CID
      tree
   10.Copy CHKDSK32.DLL from c:\tempwork to the DISK_3 directory of your CID
      tree
   11.Copy UHPFS.DLL from c:\tempwork to the DISK_3 directory of your CID
      tree
   12.Make a backup copy of the BUNDLE file on DISK_0
   13.Copy DISK_0\BUNDLE c:\tempwork
   14.Copy PACK2.EXE to c:\tempwork. If you don't have this file you can get
      it using your Web browser from

         ftp://ps.software.ibm.com/ps/products/os2/fixes/v4warp


   15.PACK2 CHKDSK32.EXE bundle /H:\OS2\CHKDSK32.EXE /A

      Note: This adds CHKDSK32.EXE to the bundle file.  Enter "unpack bundle
      /show" to verify it's really there.

   16.Copy the updated BUNDLE back to the DISK_0 directory
   17.Delete the c:\tempwork directory and files.
   18.Copy the files SCSIADDS and PRESCHEK from DISK_4 to DISK_5.
   19.Do the CID install







   
                                                      Installation Notes  10


                   January 12, 2001 - Warp 4 FixPak XRCM015

   3.0.21 MULTIMEDIA NO LONGER SELECTABLE

   IBM Multimedia Presentation Manager/2 (MPM) is now fully integrated into
   the base OS/2. As part of this change, the \MMOS2\INSTALL\SYSLEVEL.MPM
   file has been deleted. This means you will no longer see it as a
   selectable entry in the Serviceable Products window when using the
   A:SERVICE method of installation.


   3.0.22 MMPARTS.DLL/USER.EXE POPUP DURING INSTALL

   If you get a popup about MMPARTS.DLL or USER.EXE during install, reply
   "OK" to replace it.


   3.0.23 CSF0208 NO PRODUCTS WERE FOUND ON THE TARGET ...

   This means no SYSLEVEL files was found that had a CSD Level, COMPID,
   Version and Type that matched any of the SYSLEVEL files supported by this
   FixPak. Run the SYSLEVEL command and record the output for SYSLEVEL.OS2
   in the OS2/INSTALL directory on your boot drive. Compare this data with
   the data contained in the README.1ST file on FixPak disk 1.

   To recover from this, rename the existing SYSLEVEL.OS2 file to SYSL.OS2
   and copy SYSLEVEL.OS2 from your Warp 4 installation DISK 1.


   3.0.24 CSF0248 ARCHIVE PATH IS SHARED BETWEEN MISMATCHED

   1. The Archive path you specified (or was previously specified) contains
      files from a different release of OS/2. You need to specify a
      different Archive path.
   2. You have a bad SYSLEVEL.OS2 or SYSLEVEL.MPM file. Both must have the
      same Current CSD Level, Version, Type and Component ID if you point
      both Fixpak Archives to the same location.

      Check \OS2\INSTALL\SYSLEVEL.OS2 and \MMOS2\INSTALL\SYSLEVEL.MPM. If
      either is wrong, place the last FixPak disk in A: and run FIXSYSL.CMD
      to correct SYSLEVEL.OS2 problems or SYSZMPM.CMD to fix SYSLEVEL.MPM
      problems.



   3.0.25 CSF0249 ERROR OPENING OR CREATING ARCHIVE FILE.

   Typically this means the FixPak Archive directory has been deleted but
   the files that point to it still exist. You need to delete the
   LOGF000.OS2 and LOGSTART.OS2 files from your OS2/INSTALL directory.
   LOGSTART.OS2 has the R/O attribute set and it needs to be reset before
   the file can be deleted.  There may also be a LOGARCH.OS2 file that needs
   to be deleted.

   
                                                      Installation Notes  11


                   January 12, 2001 - Warp 4 FixPak XRCM015

   This can also occur for Multi Media Presentation Manager/2 (MMPM). You
   would then need to delete the LOGF0000.MPM and LOGSTART.MPM files from
   the \MMOS2\INSTALL directory and possibly LOGARCH.MPM if it exists.


   3.0.26 PRINTER INSTALLATION PROCESS CHANGE

   If you install a new printer by clicking MB2 on the Printer icon in the
   templates folder then clicking on Install, the printer object will now be
   created in the Printer folder, not on the Desktop.


   3.0.27 CONFIGURATION INSTALLATION DISTRIBUTION ( CID )

   Read the README.CID on Disk # 1 for an example of how to set up a
   response file to do a CID install.




































   
                                                      Installation Notes  12


                   January 12, 2001 - Warp 4 FixPak XRCM015

   4.0 POST INSTALLATION NOTES



   4.0.1 ENABLING CLIENT UPDATES TO THE WSOD 2.0 GRADD.MOD FILE

   IBM WorkSpace On-Demand 2.0 now supports all resolutions and color depths
   for GRADD model video drivers (this includes the GENGRADD and IBM300G2
   machine classes).  To enable this support, modify the client's FIT file
   to enable the client to rewrite the GR ADD.MOD file in the client's OS2
   directory.

   For existing clients, edit the client's FIT file
   \IBMLAN\RPL\FITS\<client_name>.  FIT, where <client_name> represents the
   NetBIOS name of the client machine.

   Change the following entry:

   þ  Z:\OS2\GRADD.MOD   \\<RPLSERVR>\WRKFILES\<client_name>\OS2

   þ  to

   þ  Z:\OS2\GRADD.MOD   \\<RPLSERVR>\WRKFILES\<client_name>\OS2\GRADD.MOD

   where <RPLSERVR> represents the NetBIOS name of the RPL server, and
   <client_name> represents the NetBIOS name of the client machine.

   To enable this capability for all subsequently created clients, perform a
   similiar modification on the machine class template FIT file, as follows:
   \IBMLAN\RPL\MACHINES\BB20.<cc>\<machine_class>.MC\<machine_class>.FIT,
   where <cc> represents the country code, and <machine_class> represents
   the name of the machine class.  Update both the GENGRADD and IBM300G2
   machine class FIT files as follows:

   Change the following entry:

   þ  Z:\OS2\GRADD.MOD   \\<RPLSERVR>\WRKFILES\DEFAULT\OS2

   þ  to

   þ  Z:\OS2\GRADD.MOD   \\<RPLSERVR>\WRKFILES\DEFAULT\OS2\GRADD.MOD

   where <RPLSERVR> represents the NetBIOS name of the RPL server.


   4.0.2 PRINT SCREEN SET PARAMETER FOR APAR JR11837

   Add the following environment varible line to CONFIG.SYS to print active
   window during Print Screen operation:



   
                                                 Post Installation Notes  13


                   January 12, 2001 - Warp 4 FixPak XRCM015

   SET PM_PRINTSCREEN_ACTIVE_WINDOW=ON

   The WINDOW with focus will print when a Print Screen operation is
   initiated.

   For the default Print Screen operatin, perform either of these steps:

   Remove line "SET_PM_PRINTSCREEN_ACTIVE_WINDOW=ON" from CONFIG.SYS or
   change the line to read:

   "SET_PM_PRINTSCREEN_ACTIVE_WINDOW=OFF"

   Note:  System must be re-booted after any CONFIG.SYS changes.


   4.0.3 NEW MESSAGE BOX IN FIX FOR APAR JR12954

   With FixPak 10 installed, if you tried to create Utility Disks and
   selected "Use files from hard disk if they exist" you would get a SYS3175
   trap. This was caused by a much larger AIC7870.ADD file causing the
   diskette to fill up before all files were copied to it.

   With FixPak 11 you will now get a "Diskette Full" message box that says
   "Remove unwanted files and press OK.".

   This means you should delete from the diskette in your A: drive, files
   that are not needed on your system.  Good candidates for deletion are the
   CD-ROM drivers and harddisk drivers you do not need. You can check
   CONFIG.SYS in the root of your boot drive to see if a file is used. If
   not it can be deleted.

   When you delete a file, also delete or REM out that line in CONFIG.SYS on
   the diskette in A:.


   4.0.4 RAS FILE CHANGES

   Beginning with FixPak 11, the following files are being added to the
   \OS2\SYSTEM directory. If they also exist in the \OS2 directory you can
   delete them as they are no longer needed there.

   þ  DTRACE.EXE
   þ  TRACEFMT.EXE
   þ  TRSPOOL.EXE

   If you do not delete them from the \OS2 directory, they will be serviced
   the same as the ones in the \OS2\SYSTEM directory to keep them current.

   Also, the following files in the \OS2\SYSTEM\RAS directory can be deleted
   as they have been superseded as shown:


   
                                                 Post Installation Notes  14


                   January 12, 2001 - Warp 4 FixPak XRCM015

   File           Superseded by
   MDTRACE.doc    DTRACE.DOC
   MTRSPOOL.DOC   TRSPOOL.DOC



   4.0.5 SETTING IRQ9 PROCESSING IN CONFIG.SYS FOR VPIC.SYS

   Some applications like PCAS (and some terminal emulators) have problems
   sharing IRQ9 in a VDM.  Since the DOS Virtual Device drivers are not
   loaded out of CONFIG.SYS, a new device driver VPICPARM.SYS has been added
   starting with Warp 3 FixPak 38 and Warp 4 FixPak 8.

   To prevent sharing of IRQ9 in a VDM, add the following statement in
   config.sys:

      device=x:\os2\mdos\vpicparm.sys irq9_off
      (x: is your OS/2 boot drive)


   Next, in the settings for the program that requires exclusive access to
   IRQ9, set the DOS setting HW_SHARE_IRQ9 to ON.

   When you next boot your system, VDMs will not share IRQ9.


   4.0.6 WINDOWS PRINTER DRIVERS LEAVE A ZOMBIE THREAD RUNNING

   A problem occurs with some Windows printer drivers where a zombie thread
   is left running after the program that loaded it is exited.

   This does not occur when the program is run from a Seamless instance of
   PROGMAN or from a Full Screen session because when these are exited the
   whole WINOS2 Subsystem is exited.

   This problem has been reported for the Adobe and Hewlett Packard Windows
   printer drivers. To correct this problem for people running with these
   drivers ONLY who have experienced symptoms such as:

   þ  exiting a program running seamlessly after printing or
   þ  setting up a printer and seeing the icon not being unhatched and/or
   þ  not being able to start another copy of the program

   Add the following line in OS2\MDOS\WINOS2\SYSTEM.INI in the *boot*
   section:

   þ  backgroundtasks=run_enum.exe,hpfbkg02.exe

   then restart WINOS2.

   Note: There may be other drivers that have the same problem.  If you

   
                                                 Post Installation Notes  15


                   January 12, 2001 - Warp 4 FixPak XRCM015

   experiences a similar problem with other drivers, please report it so the
   correct SYSTEM.INI entry can be determined.



   4.0.7 APAR JR09494 (TRAP EXITING WINOS2 WITH MWAVE AUDIO)

   The fix for APAR JR09434 (trap exiting winos2 with MWAVE audio) requires
   a new MWAVEVDD.SYS dated 11/96 or later.  This file is available from the
   IBM PC Company web site at http://www.pc.ibm.com.


   4.0.8 SYS3170 INSTALLING LOTUS SMARTSUITE 96

   A problem was discovered when attempting to install Lotus SmartSuite 96
   with a early version of the Matrox video driver.  A SYS3170 occurs after
   pressing the button to start copying the files to the hard disk.

   The problem does not occur with the current Matrox driver available on
   the Web at

      http://www.matrox.com/mgaweb/drivers/ftp_os2.htm


   A work around that does not involve downloading files from the web, is to
   switch your display driver to VGA during the install and after it has
   completed, restore the Matrox driver.


   4.0.9 INTERMITTENT HANGS

   If you experience intermittent hangs of your system, check your LIBPATH
   statement in CONFIG.SYS to see if SOM.DLL is in a directory other than,
   and ahead of, OS2\DLL.

   If yes, either change the LIBPATH statement to move the directory after
   OS2\DLL or try renaming SOM.DLL to SOM.DLO.

   One known cause of this is VisualAge C++. It has a version of SOM.DLL in
   its DLL library and the installation puts this library ahead of OS2\DLL
   in the LIBPATH statement.











   
                                                 Post Installation Notes  16


                   January 12, 2001 - Warp 4 FixPak XRCM015

   5.0 NEW FUNCTION



   5.1 SYSTEM BOOT MESSAGE ENHANCEMENTS

   An enhancement has been made to the functions available at system boot
   time when the "white blob OS/2" appears in the upper left corner of the
   screen.

   þ  Alt+F3 - is the equivalent of Alt+F1 plus Alt+F2

   This will always display the device driver load information irregardless
   of what action you specify on the menu.

   Alt+F2 is automatically enabled if you create a file named ALTF2ON.$$$ in
   the root or OS2\BOOT directory of the boot drive. The content of this
   file does not matter.


   5.2 INTEL'S NEW SPEEDSTEP

   The support for Intel's new SpeedStep (a.k.a. Geyserville) included in
   this FixPak.


   5.3 NEW RAS UTILITIES ADDED

   Two new RAS utilities are included for Pak 13: PSFILES.EXE and
   PSSEMS.EXE.

   PSFILES.EXE can dump out information about open files on the system.  By
   default, it dumps out the information for all processes. Alternately,
   "PSFILES xxx" will dump out information for PID xxx (xxx is a hex number,
   e.g. from PSTAT).

   PSSEMS.EXE can dump out information about open 32 bit semaphores on the
   system.  By default it prints out all the shared (i.e. system-wide)
   semaphores.  Usage is:  pssems [/n] [hex_pid | /a] ; where /n suppresses
   shared semaphores and /a prints pruivate sems for all system processes.

   Note: These RAS Utilities are added to the OS2 directory on your system.


   5.4 SERVICEABILITY (RAS) ENHANCEMENTS

   With FixPak 35 for Warp 3.0 and FixPak 10 for Warp 4.0 major enhancements
   were provided to the system diagnostic tools (RAS Enhancements).  They
   provide major functional enhancements to the System Trace and Process
   Dump facilities.  Full details of these enhancements can be found in the
   README.DBG file that will be found in the \OS2\INSTALL directory after

   
                                                            New Function  17


                   January 12, 2001 - Warp 4 FixPak XRCM015

   this FixPak is installed.

   Other associated documentation may be found in:

   þ  OS2\SYSTEM\RAS\TRACE.DOC
   þ  OS2\SYSTEM\RAS\DTRACE.DOC
   þ  OS2\SYSTEM\RAS\PROCDUMP.DOC
   þ  OS2\SYSTEM\RAS\TRSPOOL.DOC

   Always refer to README.DBG for details of any RAS enhancements delivered
   with a FixPak.


   5.5 QUERYING FILE DATES FOR FILES AFTER DEC 31, 1999 IN REXX

   Existing REXX functions return file dates with a two digit year only.
   While these functions are Year 2000 tolerant (i.e. the results will be
   correct for files dated after Dec 31, 1999) they require some additional
   logic in existing programs to handle the returned date correctly when
   they are compared with other file dates.

   Since the output format of the existing functions could not be changed
   for compatibility reasons, new options have been added to the REXX
   interpreter to return file dates with the year formatted with 4 digits.
   Two functions have been extended to support the new format. The syntax to
   retrieve the file date in 4 digit format is as follows:

      /********************************************/
      /* Use STREAM QUERY TIMESTAMP to query file */
      /* date in 4 digit format                   */
      /********************************************/
      Say Stream("C:\CONFIG.SYS", "C", "QUERY TIMESTAMP")

      /***********************************************/
      /* Use option "L" with SysFileTree to return a */
      /* list of files with long date format         */
      /***********************************************/
      Call RxFuncAdd "SysLoadFuncs", "RexxUtil", "SysLoadFuncs"
      Call SysLoadFuncs
      Call SysFileTree "C:\*.*", "Files", "L"
      Do i = 1 To Files.0
         Say Files.i
      End


   These extensions are available in both classic REXX and Object REXX on
   OS/2 Warp 3 and Warp 4 since fix pack versions 35 and 6. If you use these
   extensions in your program you have to make sure that you are running the
   right level of REXX



   
                                                            New Function  18


                   January 12, 2001 - Warp 4 FixPak XRCM015

   5.6 ENHANCED SUPPORT FOR WORKSPACE ON-DEMAND



   5.6.1 PMLOGON USER EXITS

   This function, provided by PMLOGON, allows system integrators to have
   REXX code executed at specific points during the startup and logon
   sequence.  By default, user exits are disabled in PMLOGON.EXE.  To enable
   user exits, an execution parameter (/URX) in the RUNWORKPLACE line of the
   CONFIG.SYS file must be added.  The /URX parameter specifies the location
   and name of the user exit command file:

      Execution Parameter            User Exit command file that will be
                                                  executed
      -------------------            -----------------------------------

      /URX                           \OS2\PMLOGURX.CMD

      /URX:<filename>.CMD            <filename>.CMD located in one of the
                                     locations specified by the PATH
                                     environment variable

      /URX:d:\<path>\<filename>.CMD  d:\<path>\<filename>.CMD


   The same command file is called for ALL user exits.  The FIRST parameter
   supplied to the command file indicates the exit that it is being called
   for. The REXX command file is called for all these exits, even if it does
   not need to process all of the exits.  The REXX command file must be able
   to return error free if it receives an exit number that it does not need
   to handle.  The following user exits are available:




















   
                                                            New Function  19


                   January 12, 2001 - Warp 4 FixPak XRCM015

       First Parameter    Exit Description
       ---------------    ----------------

       0                  Executes ONCE per boot, before the requester
                          is started.  There is no user logged on at this
                          time.  This exit may return a string that is
                          processed exactly as the following execution
                          parameters set in RUNWORKPLACE of CONFIG.SYS:

                          /U: /UF: /P: /PF: /D: /DF: /PW  /AUTO  /NONFLE

                          It is processed immediately after the execution
                          parameters.  See Note 2 below on /AUTO processing.

       1                  Executes ONCE per logon, after the requester
                          is started, but before logon occurs.  There is no
                          user logged on at this time.  This exit may return
                          a string that is processed exactly as the
                          following execution parameters set in RUNWORKPLACE
                          of CONFIG.SYS:

                          /U: /UF: /P: /PF: /D: /DF: /PW  /AUTO  /NONFLE

                          It is processed immediately before logon.  See
                          Note 2 below on /AUTO processing.

       2                  Executes ONCE per logon, after the requester is
                          started and after logon occurs.  There is a user
                          logged on at this time, but the Desktop has not
                          been started and the objects are not displayed.
                          No returns are processed.

       3                  Executes ONCE per logon, after the Desktop has
                          been started and the objects are created but not
                          currently displayed, but immediately before
                          control is passed to the Desktop.  The icons are
                          fixed at this point.  There is a user logged on
                          at this time.  No returns are processed.

        4                 Executes immediately after a failed logon.  The
                          second parameter passed to the exit contains the
                          return code from the logon API.  This exit may
                          return a string that is processed exactly as the
                          execution parameters set in RUNWORKPLACE of
                          CONFIG.SYS for the following parameters only:

                          /U: /UF: /P: /PF: /D: /DF:  /PW  /AUTO  /NONFLE

                          This exit is processed immediately and logon is
                          retried with the new parameters regardless of
                          the /AUTO switch.  See Note 2 below on /AUTO

   
                                                            New Function  20


                   January 12, 2001 - Warp 4 FixPak XRCM015

                          processing.  If no string is returned, then the
                          normal logon failure or password expired message
                          box is displayed.

      Note 1:  The session environment for the REXX command file is that
               of PMLOGON.EXE and, therefore, does not contain any input or
               output facility. For example, "PULL" from the keyboard and
               "SAY" to the console do not work.

      Note 2:  The /AUTO parameter is validated at every step (for example,
               after command line processing, after exit 0 returns, and
               after exit 1 returns).  It is turned off if insufficient
               information (such as no user ID) is provided at that stage
               for an automatic logon.  If the user ID is supplied by the
               exit, that exit must also provide the /AUTO parameter in
               order for an auto logon to work.




   5.6.2 SETUP STRINGS FOR PUBLIC APPLICATIONS

   The NCAPPUTL.EXE utility of WorkSpace On-Demand allows for specific
   Workplace Shell WPProgram setup strings that are provided when creating
   public applications on the WorkSpace On-Demand Desktop.  In particular,
   the ICONPOS setup string can be defined for a public application so that
   the Administrator can identify where application icons are placed on the
   WorkSpace On-Demand Desktop.

   When a WorkSpace On-Demand Administrator creates a public application, a
   new environment variable must be added to the application to provide a
   setup string.  The parameter name is NCC_SETUP_POST and the parameter
   value can consist of any of the setup strings specified below.  Each
   setup string consists of a KEYNAME, followed immediately by an equal
   ('=') sign and a VALUE.  Multiple setup strings can be passed in the
   NCC_SETUP_POST environment variable by separating each setup string with
   a semicolon (';').  The creation of this parameter can be performed
   either using the WorkSpace On-Demand Public Applications Notebook (on the
   Parameters page) or using a Command Line Interface (CLI).  The following
   is an example of one parameter:

       NCC_SETUP_POST=ICONPOS=10,10;


   The NCC_SETUP_POST environment variable will be searched for when each
   WorkSpace On-Demand public application is created.  If it is found, its
   value will be used when creating the public application on the WorkSpace
   On-Demand Desktop.

   The following KEYNAME values are permitted for setup strings:


   
                                                            New Function  21


                   January 12, 2001 - Warp 4 FixPak XRCM015

       Keyname        Value            Description
       -------        -----            -----------

       CCVIEW         DEFAULT          Specifies the default value for
                                       concurrent views
                      YES              Creates new views
                      NO               Displays the open view

       ICONFILE       filename         Sets the object's icon.

       ICONPOS        x,y              Sets the initial icon position in
                                       a folder.  The "x" and "y" values
                                       represent the position in the object's
                                       folder in percentage coordinates.

       ICONRESOURCE   id,module        Sets the object's icon.  The "id"
                                       is the icon resource ID in the dynamic
                                       link library (DLL) "module."


   Refer to the Workplace Shell Programming Reference for a description and
   definition of the above setup strings.

   Note: The NCC_SETUP_POST environment variable exists in the current
   environment when the public application with which it is associated is
   running.


   5.6.3 COMMAND LINE OPTIONS FOR TLOGOFF AND TSHUTDWN

   Three command line options have been added to both TLOGOFF.EXE and
   TSHUTDWN.EXE:

    1.  /Q -- causes these programs not to display the UPM/LAN
              copyright window.
    2.  /N -- causes no confirmation message boxes to be displayed.


   Note: If these parameters are not capitalized, they are ignored.


   5.6.4 PMLOGON NO PROGRESS INDICATOR OPTION

   An execution parameter has been added to PMLOGON that causes the progress
   indicator window not to be displayed during all of logon processing. That
   parameter is /NOPI and can be specified only from the RUNWORKPLACE line
   in CONFIG.SYS. If /NOPI is returned as a parameter from a user REXX exit,
   it is ignored.




   
                                                            New Function  22


                   January 12, 2001 - Warp 4 FixPak XRCM015

   5.6.5 PMLOGON NO SYSTEM MODAL WINDOW OPTION

   An execution parameter has been added to PMLOGON which prevents PMLOGON
   from setting any of its windows to be system modal after user exit 1 is
   executed on the first boot or anytime after a logoff.  The parameter is
   /NOSM1 and can only be specified from the RUNWORKPLACE line in
   CONFIG.SYS.  If /NOSM1 is returned as a parameter from a user REXX exit,
   it is ignored.


   5.7 EURO SUPPORT

   The European Monetary Union is creating the Euro as a new common currency
   for Europe.  As part of this effort the European Commission has
   introduced a new character which represents the Euro.  This character
   looks like an uppercase C with two horizontal lines through it.  The Euro
   will come into existence on January 1, 1999 for use in banking.  Euro
   notes and coins will be issued starting January 2002.



   5.7.1 BASE OS/2 SUPPORT

   The OS/2 basic support for Euro consists of adding the Euro character to
   fonts, codepages, and keyboards.  The Euro is added to all display and
   ATM fonts and to the Times New Roman MT 30 TrueType font which is
   available with Java 1.1.  The Euro is added to all western European
   keyboards and the US International keyboard.  The Euro can be used in
   base OS/2, Presentation Manager, and in DOS.  The Euro is not supported
   in WinOS2.

   The Euro character is added to these OS/2 base and PM codepages:

       850    0xD5   PC Latin 1          base + PM
       857    0xD5   PC Turkish          base + PM
       1004   0x80   Windows Extended    base + PM
       1250   0x80   Windows Latin 2     PM
       1251   0x88   Windows Cyrillic    PM
       1252   0x80   Windows Latin 1     PM
       1254   0x80   Windows Turkish     PM
       1257   0x80   Windows Baltic      PM


   The Euro character is added to these fonts.








   
                                                            New Function  23


                   January 12, 2001 - Warp 4 FixPak XRCM015

       Courier                      (bitmap)
       Courier                      (ATM)
       Helv                         (bitmap)
       Helvetica                    (ATM)
       System Monospace             (bitmap)
       System Proportional          (bitmap)
       System VIO                   (bitmap)
       Times New Roman              (ATM)
       Times New Roman MT 30        (TrueType - Java 1.1)
       Tms Rmn                      (bitmap)
       WarpSans                     (bitmap)


   The Euro character is added to these OS/2 keyboards:

       Belgium           be       altgr-e
       Canada            ca       altgr-e
       Canadian French   cf       altgr-e
       Denmark           dk       altgr-5
       Finland           su (fi)  altgr-5
       France            fr       altgr-e
       Germany           gr (de)  altgr-e
       Germany(453)      de453    altgr-e
       Iceland           ic (is)  altgr-5
       Iceland 101       is458    altgr-5
       Italy             it       altgr-5
       Italy extended    itn142    altgr-5
       Latin America     la       altgr-e
       Netherlands       nl       altgr-e
       Norway            no       altgr-5
       Portugal          po       altgr-5
       Spain             sp (es)  altgr-5
       Sweden            sv       altgr-5
       Swiss French      sf       altgr-e
       Swiss German      sg (sd)  altgr-e
       Turkey            tr179    altgr-e
       Turkey 440        tr440    altgr-e
       UK                uk       altgr-4
       UK 168            uk168    altgr-e
       US International  ux       altgr-e





   5.7.2 WHERE EURO IS NOT SUPPORTED

   The Euro is not supported in WinOS2.  This character is not supported in
   the Windows-1252 codepage used in WinOS2.  This character is not
   available on the WinOS2 keyboards.  This character is not available in
   the WinOS2 supplied TrueType fonts:

   
                                                            New Function  24


                   January 12, 2001 - Warp 4 FixPak XRCM015

           Arial             (Windows TrueType)
           Courier New       (Windows TrueType)


   The Euro is not in the 437 (US English) or 863 (Canadian French)
   codepages.  You must use codepage 850 to get the Euro.  The Euro is not
   on the US keyboard.  You can use the US International (ux) keyboard
   instead.



   5.7.3 PRINTING THE EURO

   Existing printers do not support the Euro in device fonts.  You need to
   select a font which is not mapped to a device font in order to print the
   Euro.  The Euro will print correctly on printers where the system fonts
   are used.  When there are problems, a dotless-i is normally printed
   instead of the Euro.

   For PostScript printers, it is necessary to disable device fonts to print
   the Euro in one of the base PostScript fonts (Helvetica, Times Roman,
   Courier).  To do this:

   1. Open the properties of the Printer object
   2. Select the Print Driver tab
   3. Select Job Properties
   4. Select the Output tab
   5. Deselect "Use printer device fonts"



   5.8 NEW WARP REGISTRY EDITOR

   See the README.REG file on the first FixPak disk for details.


   5.9 WORKSPACE ON DEMAND

   WorkSpace on Demand Release 1 is supported starting with FixPak 5
   (XR_M005).  WorkSpace on Demand Release 2 is supported starting with
   FixPak 11 (XR_M011).


   5.10 IBM OPEN32

   This FixPak includes updates to the IBM Open32 Application Programming
   Interfaces (APIs).





   
                                                            New Function  25


                   January 12, 2001 - Warp 4 FixPak XRCM015

   5.11 GRAPHICS ADAPTER DEVICE DRIVERS (GRADD)

   Future updates for GRADD and other video drivers (when they are released)
   will be found via the internet at:

   þ  http://service.software.ibm.com/pslaunch.html



   5.12 JOLIET-2 SUPPORT IN CDFS.IFS

   Joliet is a Microsoft extension to the ISO 9660 CD-ROM file system which
   adds Unicode and longname support.  Presently both Windows 95 and Windows
   NT 4.0 support the Joliet-2 and Joilet-3 formats.  Beginning with Warp 3
   Fixpak 32 and Warp 4 Fixpak 4, you can enable the Joliet-2 support by
   adding the '/w' option to the CDFS.IFS statement in CONFIG.SYS.

   Joilet-3 format is not supported.



   5.13 NEW (IMPROVED) CHKDSK

   This version of CHKDSK offers significant improvements for High
   Performance File System (HPFS) drives.  CHKDSK now fixes all errors found
   on HPFS drives in a single pass, operating faster, and with less memory
   than previous versions.  It contains better error detection and
   correction algorithms, and creates a log file so service personnel can
   determine what errors it found and how it corrected them.  Finally, only
   the amount of physical memory in your system limits the size of the
   largest drive CHKDSK can check at boot time (autocheck).

   Improvements in this version of CHKDSK are for HPFS drives only.  No
   changes occurred to checking File Allocation Table (FAT) drives.  This
   enhanced CHKDSK operates on IBM OS/2 Warp 3.0 and higher, including IBM
   Warp 4, IBM Warp Server 4 and IBM Warp Server 4 SMP.  This new CHKDSK
   version will not run on version of OS/2 before OS/2 Warp 3.0.


   5.13.1 USING THE NEW CHKDSK

   The interface to CHKDSK remains CHKDSK.COM and PMCHKDSK.  No changes
   occurred to the CHKDSK command line parameters or messages.

   The first time this version of CHKDSK runs on a fast formatted drive, it
   will report harmless errors.  These errors go away once CHKDSK is run
   with the /F option.

   Note: OS/2 Warp Install uses fast format.



   
                                                            New Function  26


                   January 12, 2001 - Warp 4 FixPak XRCM015

   Unlike prior versions of CHKDSK, large drives ( > 8GB) may be autochecked
   if sufficient memory is available.  The amount of memory required can
   vary between 16MB and 48MB depending on the size of the drive.  To enable
   the autochecking of large drives, the following line must be added to
   your config.sys:

     BASEDEV=CHKDSK.SYS


   This device driver allows CHKDSK to access memory normally reserved for
   the system during the boot process.  Due to this, if CHKDSK has to use
   this memory:

   þ  The memory will not be available for the system to use in completing
      the boot process
   þ  Errors may occur later in the boot process.

   Hence, the chkdsk.sys device driver is smart enough to recognize when
   CHKDSK has used this reserved memory and will reboot the system
   automatically after all HPFS drives have been checked.  Since the drives
   were checked before the reboot, CHKDSK will not have to check them after
   the reboot and the system will boot normally.

   Note: For those wishing to run unattended:  In order to prevent the
   system from pausing between autocheck and the reboot, we recommend that
   the statement PAUSEONERROR=NO be in the CONFIG.SYS.

   When you don't have enough physical (real) memory to autocheck large
   drives, you must use virtual memory from SWAPPER.DAT.  The technique is
   to check the large drives between the time OS/2 starts and PM begins.  To
   start OS/2, the swap file and device drivers must reside on an unaffected
   drive.  The drives to be checked must not appear in the autocheck list in
   the IFS statement for HPFS (or HPFS386).

   This technique involves the following steps:

   1. Remove the drive letter of the affected drive(s) from the autocheck
      list in the IFS statement for HPFS (or HPFS386).
   2. If you are using HPFS, add /QUIET to the IFS statement for HPFS.
   3. If you are using HPFS386.IFS, add POPUPERRORS=NO below the
      [filesystem] section of the HPFS386.INI file. Support for the
      POPUPERRORS parameter requires OS/2 LAN Server FixPak IP08265 or
      higher for LS 5.0 or FixPak IP08503 or higher for LS 5.1. In addition,
      the POPUPERRORS parameter ONLY suppresses HFS0102 messages.
   4. Add a CALL statement to your config.sys.  This CALL statement will
      call CHKDSK.COM, and will tell it what drive to check. This CALL
      statement must appear after the LIBPATH=, SET PATH=, and SET DPATH=
      statements, but before any other CALL statements in your CONFIG.SYS
      file.



   
                                                            New Function  27


                   January 12, 2001 - Warp 4 FixPak XRCM015

   Calls to CHKDSK in STARTUP.CMD are not necessary, when using this method
   or the base device driver (chkdsk.sys) method.

   Example: The computer boots from drive C (moderate HPFS or FAT sized
   drive).  Drive D (large HPFS) requires more RAM to check than installed
   in the machine.

     Original IFS statement:

          IFS=C:\OS2\HPFS.IFS /CACHE:2048 /CRECL:32 /AUTOCHECK:CD

     New IFS statement:

          IFS=C:\OS2\HPFS.IFS /CACHE:2048 /CRECL:32 /AUTOCHECK:C /QUIET

     The CALL statement to use is:

          CALL=C:\OS2\CHKDSK.COM D: /C


   The /C option tells CHKDSK to check the drive only if it is "dirty" and
   it needs checking.

   If you need to boot from diskettes to check an HPFS drive, you must have
   the following files on the diskette you wish to run CHKDSK from:

     CHKDSK.COM
     CHKDSK32.DLL
     UHPFS.DLL


   The BOOTDISK.EXE program has been updated to create new utility diskettes
   with the proper files.


   5.13.2 CHKDSK LOG FORMATTER

   CHKDSK creates a binary service log file (chkdsk.log) on the root of the
   drive being checked during autocheck or whenever the /F option is
   invoked.  The previous log file is saved as chkdsk.old. A formatter for
   this log file can be found at:

   ftp://service.boulder.ibm.com/ps/products/os2/fixes/chklogpk.exe


   This is a self extracting ZIP file. Place it in a directory in your path
   and enter CHKLOGPK. This will create the following files:





   
                                                            New Function  28


                   January 12, 2001 - Warp 4 FixPak XRCM015

     message.txt
     msghdr.txt
     pmchklog.exe
     range.txt
     readme


   They should all have a date of 05/14/97 or later (May 14, 1997).

   This is a tool used by OS/2 service to format and view the new CHKDSK log
   entries.  There is no support for this tool. You are welcome to use it
   but if you have problems with it or do not understand the output DO NOT
   contact IBM for assistance as none will be provided.


   5.14 AUTOMATED TRAP SCREEN LOGGING

   Whenever an application program traps, the trap information is (now)
   automatically logged in the POPUPLOG.OS2 file. This is a cumulative file
   that is by default located in the root directory of the bootable
   partition.  Should this file become too large then it may be erased or
   pruned (reduced in size). The system will automatically re-create it if
   it does not exist.

   The TRAPLOG command and SUPPRESSPOPUPS CONFIG.SYS statement may be used
   to control trap screen behavior (see below).


   5.14.1 SUPPRESSPOPUPS

   SUPPRESSPOPUPS=0 will restore behavior to pre-FixPak 29 behavior.  That
   is, to disable logging and to have trap screens displayed unless
   specifically overridden by an application's use of the DosError API.

   SUPPRESSPOPUPS=x: will disable trap screen display for all processes and
   will log trap screens in x:\POPUPLOG.OS2, where x: is a drive or
   partition.

   If SUPPRESSPOPUPS is omitted then the behavior is as described above
   under "Automated Trap Screen Logging".


   5.14.2 TRAPLOG

   The TRAPLOG command allows dynamic control of trap information logging.

   The command syntax is:

          TRAPLOG [x: | NOLOG] [POPUPS | NOPOPUPS]



   
                                                            New Function  29


                   January 12, 2001 - Warp 4 FixPak XRCM015

   where:

   þ  x: specifies that trap information is to be logged in
       x:\POPUPLOG.OS2, x: being any partition drive letter.
   þ  NOLOG disables logging of trap information.
   þ  POPUPS enables the trap information pop-up message (SYS3175).
   þ  NOPOPUPS disables the trap information pop-up message.



   5.14.3 TRAPDUMP

   The TRAPDUMP command allows the conditions under which a trap will
   initiate a System Dump to be set dynamically. Prior to Warp 3.0 FixPak
   29, the System Dump setting could only be manipulated from CONFIG.SYS by
   use of the TRAPDUMP statement.

   Use of this command should be made under the direction of service
   personnel.

   Warning: The initiation of a System Dump causes an immediate termination
   of the system without any shutdown. No file system shutdown is performed.
   The system behaves as if a fatal crash has occurred, thus under rare
   circumstances data can be lost.

   The command syntax is:

          TRAPDUMP [[ON] | [OFF] | [R0]] [x:] [/NOCHECK]


   where:

   þ  ON enables all application and system traps to initiate a System Dump.
   þ  OFF disables automatic dump initiation.
   þ  R0 enables only Ring 0 traps to initiate a System Dump.
   þ  x: specifies the Dump Partition.
   þ  NOCHECK overrides the system level check for WARP 4.0, since use of
      this command on a system level prior to FixPak 29 is equivalent to the
      SYSDUMP command.



   5.14.4 SYSDUMP

   The SYSDUMP command forces a System Dump to be initiated, regardless of
   the TRAPDUMP settings. This command is provided for the use of service
   personnel to allow Dump Initiation to be automated through use of a
   command file.

   Warning: The initiation of a System Dump causes an immediate termination
   of the system without any shutdown. No file system shutdown is performed.

   
                                                            New Function  30


                   January 12, 2001 - Warp 4 FixPak XRCM015

   The system behaves as if a fatal crash has occurred thus under rare
   circumstances data can be lost.

   The command syntax is:

          SYSDUMP [/NOPROMPT]


   where:

   þ  NOPROMPT allows the Dump to proceed without the prompt and response to
      message:

          "Do you want to force a system dump? (Y/N)"




   5.15 REXX NEW FUCTION

   New Function has been added in REXX. Please see the "Other README Files"
   for documentation pointers. This new function was added to FP 13 and
   later.


   5.16 OTHER README FILES

   There are other README files containing information you may want to
   review.  All except README.DBG are found on the first FixPak disk and are
   not copied to your system when the Fixpak is installed. README.DBG will
   be copied to the \OS2\INSTALL directory during installation beginning
   with Fixpak 10 and Fixpak 41.

   File           Use

   README2        Problems fixed in each FixPak (APAR list)

   README.CID     Installing FixPaks via CID

   README.REG     Use of the Warp Registry Editor REGEDIT2.EXE

   README.DBG     Tips on debugging OS/2 Warp and details on the latest
                  Serviceability (RAS) Enhancements (3.0 and 4.0).

   READREXX.TXT   New RexxUtil Function documentation added in this FixPak.







   
                                                            New Function  31


                   January 12, 2001 - Warp 4 FixPak XRCM015

   6.0 CORRECTIVE SERVICE FACILITY



   6.0.1 REQUIRED CSF LEVEL

   You should use release level f.143 or later of the OS/2 Corrective
   Service Facility to install this FixPak.

   Bootable diskettes are no longer provided starting with the F.138B CSF
   build. Instead, you now get a self-extracting ZIP file which contains the
   following:

      archctl.cmd
      build.lvl
      csfpans.dll
      filefix.dll
      fpinst.cmd
      fservice.exe
      fservice.msg
      ibmcsflk.dll
      ibmcsflk.exe
      ibmcsflk.msg
      ibmcsflk.sys
      msg.dll
      nls.dll
      pack.exe
      read.me
      readme.inf
      response.lan
      response.wp3
      response.wp4
      service.exe
      service.hlp
      shpiinst.dll
      unpack.exe
      unpack2.exe
      viocalls.dll


   Follow the directions in the READ.ME file to use the new CSF code. It
   covers the use of SERVICE.EXE and FSERVICE.EXE from a booted partition or
   from one of several alternative boot methods.


   6.0.2 WHERE YOU CAN FIND CSF CODE

   The Corrective Service Facility code is available from many places,
   including, but not limited to, the following:

   Source         How to access

   
                                             Corrective Service Facility  32


                   January 12, 2001 - Warp 4 FixPak XRCM015


   Internet(FTP)  Anonymous FTP to ftp.software.ibm.com in the
                  "/ps/products/os2/fixtool" directory.

   Internet(WWW)  Point your Web Browser at
                  ftp://service.boulder.ibm.com/ps/products/os2/fixtool

   Intranet(FTP)  Anonymous FTP to os2service.austin.ibm.com in the
                  "f:\fixpacks\fixtool" directory.



   6.0.3 CREATING FIXPAK DISKETTES

   Use LOADDSKF.EXE to create the diskettes. For each disk image, place a
   2MB HD (1.44MB formatted) diskette in A:.

   Warning: DO NOT use a 1MB (720KB formatted) diskette because you might
   have problems trying to install this FixPak.

   For each diskette image in the FixPak, do the following:

   Enter LOADDSKF XRCM015.?DK A: /F  (? can be 1 through 9, A through Z).

   Label the diskette as

         FixPak XRCM015
   Corrective Service Diskette ?
          (CSF DISK ?)


   Note: For diskette images ADK through ZDK, use the numbers 10 through 35.

        Examples:

        XRCM015.ADK = 10
        XRCM015.FDK = 15
        XRCM015.LDK = 21
      etc.




   6.1 RESIDUAL FIXPAK FILES FROM OS/2 2.11 OR WARP 3

   If the following is true:

   1. You upgraded your system from OS/2 2.11 or Warp 3
   2. You applied one or more FixPaks to the previous system
   3. You HAVE NOT applied a Warp 4 FixPak


   
                                             Corrective Service Facility  33


                   January 12, 2001 - Warp 4 FixPak XRCM015

   You will have files and directories left on your harddisk that will cause
   problems when installing a Warp 4 FixPak.

   To prevent these problems from occurring, do the following before
   applying your first Warp 4 FixPak.

   On your Warp 4 boot drive:

   þ  Delete \OS2\INSTALL\LOGF0000.OS2
   þ  ATTRIB -R \OS2\INSTALL\LOGSTART.OS2
   þ  Delete \OS2\INSTALL\LOGSTART.OS2

   On the drive where Multimedia Presentation Manager is installed:

   Note: This can be your Warp 4 boot drive or any other drive on your
   system.  Check the "SET MMBASE=" statement in CONFIG.SYS to determine
   which drive this is.

   þ  Delete \MMOS2\INSTALL\LOGF0000.MPM
   þ  ATTRIB -R \MMOS2\INSTALL\LOGSTART.MPM
   þ  Delete \MMOS2\INSTALL\LOGSTART.MPM

   Remove the old Archive and Backup directories and SERVICE.LOG file to
   recover the space they are using.

   You should also remove the FixPak Archive and Backup directories left
   over from your updated OS/2 2.11 or Warp 3 system at this time as well as
   the \OS2\INSTALL\SERVICE.LOG file.


   6.2 READ-ONLY FILES

   Some files being updated by this FixPak may have the Read-Only attribute
   set. If you are using the A:SERVICE method to install this FixPak you
   will be asked if you want the files replaced.

   Press the "OK" button.


   6.3 SYSLEVEL FILE LOCATIONS

   This FixPak will service directories based on the location of a supported
   SYSLEVEL.OS2 file.  Please check your system to make sure extra copies of
   this file are not located in directories other than:

     \OS2\INSTALL\SYSLEVEL.OS2 on the boot drive of your OS/2 partition(s)


   If additional copies of these files are found in other locations on your
   hard disk then CSF will try to service files as follows:


   
                                             Corrective Service Facility  34


                   January 12, 2001 - Warp 4 FixPak XRCM015

   For \OS2\INSTALL\SYSLEVEL.OS2

     ..\..\           all files in a directory two levels above (toward the
                      root). This should be the root directory of your boot
                      drive.

     ..\*             all files in a directory one level above (toward the root)
                      and all subdirectories below. This should be the OS2
                      directory and subdirectories.

     ..\..\VT\*       all files in the VT directory and subdirectories.

     ..\..\PSFONTS\*  all files in the PSFONTS directory and subdirectories.

     ..\..\LANGUAGE\* all files in the LANGUAGE directory and subdirectories.

     ..\..\OPENDOC\*  all files in the OPENDOC directory and subdirectories.




   6.4 RELOCATED OS/2 FILE SUPPORT

   If you have moved OS/2 files or directories to a drive other than the one
   the SYSLEVEL.OS2 file is on, do the following in order to have them
   serviced:

   þ  Create a file named USERDIRS.OS2 in the \OS2\INSTALL directory of the
      OS\2 Warp 4 partition to be serviced.

      In this file, place the full path to the directories you want to be
      serviced. Assuming your boot drive is C: and you installed Multimedia
      on the D: drive and manually moved WINOS2 support to the E: drive:



















   
                                             Corrective Service Facility  35


                   January 12, 2001 - Warp 4 FixPak XRCM015

       D:\MMOS2
       D:\MMOS2\DLL
       D:\MMOS2\DSP
       D:\MMOS2\HELP
       D:\MMOS2\IMAGES
       D:\MMOS2\INETTEMP
       D:\MMOS2\INSTALL
       D:\MMOS2\MACROS
       D:\MMOS2\MOVIES
       D:\MMOS2\SOUNDS
       D:\MMOS2\SOUNDS\DESKTOP
       D:\MMOS2\SOUNDS\GARDEN
       D:\MMOS2\SOUNDS\OCEAN
       D:\MMOS2\SOUNDS\SPACE
       E:\OS2\MDOS\WINOS2
       E:\OS2\MDOS\WINOS2\SYSTEM
       E:\OS2\MDOS\WINOS2\TEMP


   Note: Leave this file for any future OS/2 Warp 4 FixPaks you might apply.
   The easy way to create this file is to use the DIR command with the /A:D
   /S /B parameters and pipe the output to a file.

      dir d:\mmos2 /a:d /s /b > anyfile


   Then copy that data into the USERDIRS.OS2 file.

   With CSF release level F.137B or later, you can use wildcards, so your
   USERDIRS.OS2 file would be much simpler and would look like:

       D:\MMOS2\*
       E:\OS2\MDOS\WINOS2\*



















   
                                             Corrective Service Facility  36


                   January 12, 2001 - Warp 4 FixPak XRCM015

   7.0 INSTALLATION PROCESS



   7.1 BEFORE INSTALLATION

   Before installing any FixPak, run CHKDSK /F against all drives on your
   system to correct any file system errors that might be present. You
   cannot do this while OS/2 is active. You must shut down and run CHKDSK by
   one of the following methods:

   þ  Boot from your Installation, DISK 1 and DISK 2 diskettes.  If your
      file system is HPFS, then put the diskette with CHKDSK and UHPFS.DLL
      on it in your A: drive before issuing the CHKDSK command.
   þ  Boot from the Utilities disk you created via the "Create Utility
      Diskettes" icon in the System Setup folder.
   þ  Boot from a different OS/2 partition.

   Once CHKDSK has completed, reboot your system then shutdown all running
   applications before starting the FixPak installation.


   7.2 METHOD 1: INSTALL FROM BOOTED OS/2 PARTITION.

   Note: CS_???.EXE below means CS_143 or later.

   Follow the instructions in the READ.ME file that comes in the CS_???.EXE
   self-extracting zip file.  This explains how to use the CS_???.EXE file
   and the various ways you can install a FixPak with this level of CSF
   code.

   Here are some additional notes:

   Follow the displayed instructions.  When prompted to insert Corrective
   Service Diskette 1 (not CSF DISK Diskette 1), place FixPak XRCM015
   Corrective Service Diskette 1 in drive A. Repeat for the rest of the
   FixPak disks when requested to do so.

   It can take a considerable length of time for the Corrective Service
   Facility to scan your hard disk for serviceable files.  In some cases, it
   has taken as long as 40 minutes.  Please be patient and allow this
   process to complete.

   If this is the first OS/2 Warp FixPak you have applied to this system,
   then enter the path to the directory where a copy of replaced files will
   be stored (for example, D:\ARCHIVE or E:\FIXPAK\ARC, etc.)

   Note: This ARCHIVE directory is not related to the ARCHIVES directory
   built into OS/2 Warp 3 and Warp 4. Please specify a different path.  You
   must specify a different ARCHIVE directory for each product to be
   serviced.

   
                                                    Installation Process  37


                   January 12, 2001 - Warp 4 FixPak XRCM015

   If this is not the first OS/2 Warp FixPak, then enter the path to the
   BACKUP directory where a copy of replaced files will be stored (for
   example, D:\BACKUP).

   Note: You must specify a different BACKUP directory for each product to
   be serviced.

   Make sure there is sufficient space available on the drive you specify
   for archive or backup.  Even though these files are kept in compressed
   (PACK2) format, they can take up a lot of space on the drive.

   During the installation process you may see messages about Archiving,
   Updating and Deferring service.

   þ  Archiving saves a compressed copy of the original file in the ARCHIVE
      or BACKUP path you specified.
   þ  Updating means the original files are replaced with the new ones from
      this FixPak.
   þ  Deferring service means the file to be updated is currently in use by
      the system and cannot be updated.  The new files from the FixPak are
      placed in unpacked format in the \IBMCSFLK\FIX directory on the drive
      with the most free space.  They are processed by the locked file
      device driver during reboot after you shut down the system.

   See the section "FixPak Corrective Service levels and disk layouts" for
   the CSD levels this FixPak applies to.

   You will see the following during reboot of the system if you applied
   service to the OS/2 partition you were booted from.

      The locked file driver is loaded.

             Processing locked files

             Processing complete


   The system will do one automatic reboot after the Locked File Device
   Driver has completed.


   7.3 METHOD 2: INSTALL FROM ALTERNATE BOOTABLE MEDIA

   Note: CS_???.EXE below means CS_143 or later.

   Follow the instructions in the READ.ME file that comes in the CS_???.EXE
   self-extracting zip file.  This explains how to use the CS_???.EXE file
   and the various ways you can install a FixPak with this level of CSF
   code.



   
                                                    Installation Process  38


                   January 12, 2001 - Warp 4 FixPak XRCM015

   Here are some additional notes:

   This method does not prompt the user for any information.  No interaction
   with the user takes place other than requests to put the next diskette in
   drive A. All serviceable partitions on your system will be updated
   automatically unless you have modified the default response file.  Be
   especially careful of extra SYSLEVEL.OS2 or SYSLEVEL.MPM files when using
   this method because they can cause CSF to apply service to directories
   you do not want serviced.

   See the section "FixPak Corrective Service levels and disk layouts" for
   the CSD levels this FixPak applies to.

   Note: It can take a considerable length of time for the Corrective
   Service Facility to scan your hard disk for serviceable files.  Please be
   patient and allow this process to complete.

   Note: You can edit the response file to control some of the actions taken
   by FSERVICE.EXE while applying a FixPak.  See the READ.ME file or use the
   VIEW command to look at the file README.INF.  They are part of
   CS_???.EXE.


   7.4 ADDITIONAL CORRECTIVE SERVICE FACILITY INFORMATION

   Additional information on the Corrective Service Facility, like how to
   backout a FixPak, is available from the README.INF file on the first
   Corrective Service Facility disk.  To view this file, place CSF disk 1 in
   drive A and enter VIEW A:\README.INF.

   There is also some additional information in the READ.ME file.





















   
                                                    Installation Process  39


                   January 12, 2001 - Warp 4 FixPak XRCM015

   8.0 CSD LEVEL OF SYSLEVEL.OS2

   The Current CSD level field of the SYSLEVEL.OS2 file in each serviced
   partition will be updated with the name of the FixPak when it is applied.

   This is a major change from previous CSF releases. The Prior CSD level
   field will be left asis. This means when you use the SYSLEVEL command to
   look at the release levels of products on your system, you will see the
   following for SYSLEVEL.OS2.

   Before a FixPak is applied using the F.138B CSF build (or later)

      E:\OS2\INSTALL\SYSLEVEL.OS2
      IBM OS/2 Base Operating System
      Version 4.00     Component ID 5639A6100
      Type 0C
      Current CSD level: XR04000
      Prior   CSD level: XR04000


   After a FixPak is applied using the F.138B CSF build (or later)

      E:\OS2\INSTALL\SYSLEVEL.OS2
      IBM OS/2 Base Operating System
      Version 4.00     Component ID 5639A6100
      Type 0C
      Current CSD level: XR0M008
      Prior   CSD level: XR04000


   All fix information is recorded in SERVICE.LOG. Look at the file

      \OS2\INSTALL\SERVICE.LOG


   on your boot drive for information relating to the installation of
   FixPaks on your system.

   Additionally, you can use the VER /R command to see the current revision
   of OS/2 installed.  The response will look like the following for this
   FixPak:

   The Operating System/2 Version is 4.50
   Revision 14.044


   The first page of this document has a line that looks like:

   Build Level: nn.nnn



   
                                               CSD level of SYSLEVEL.OS2  40


                   January 12, 2001 - Warp 4 FixPak XRCM015

   That is the number you should see for this FixPak when you issue the VER
   /R command.


   8.0.1 NEW SYSLEVEL.FPK

   A SYSLEVEL.FPK file has been added to all Warp 4 FixPaks, beginning with
   XR_M004.  It is titled "OS/2 Warp 4 Service Level".  It contains the name
   of the currently installed FixPak in both the Current and Previous CSD
   level fields and is located in the same directory the SYSLEVEL.OS2 file
   is located in which should be \OS2\INSTALL.

   The easiest way to look at SYSLEVEL information is to use the SYSLEVEL
   command and redirect the output to a file then edit the file and search
   for SYSLEVEL.FPK.





































   
                                               CSD level of SYSLEVEL.OS2  41


                   January 12, 2001 - Warp 4 FixPak XRCM015

   9.0 FIXPAK CORRECTIVE SERVICE LEVELS AND DISK LAYOUTS

   Build Level: 14.062

   Product location on CSD:  A:\FIX\OS2.1
   Product name:  "SystŠme d'exploitation de base OS/2 IBM"
   Standard Edition  4.00
   Fixpak name:   XRCM015_   (Country = Canada (French Speaking))
   Pre-requisite CSD Level:  XRC4000_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRCM015_   (Country = Canada (French Speaking))
   Pre-requisite CSD Level:  XRC4010_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRCM015_   (Country = Canada (French Speaking))
   Pre-requisite CSD Level:  XRC4010_
   System Id:  1000
   Component Id:  5639A6120
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*
   Will create the following directories
      ..\..\OS2   Stub File:  @OS2DIR

      ..\..\OS2\DLL   Stub File:  @DLLDIR

      ..\..\OS2\BOOT   Stub File:  @BOOTDIR

      ..\..\OS2\SYSTEM   Stub File:  @SYSTDIR


   
                       FixPak Corrective Service levels and disk layouts  42


                   January 12, 2001 - Warp 4 FixPak XRCM015

      ..\..\OS2\INSTALL   Stub File:  @INSTDIR

      ..\..\OS2\INSTALL\BOOTDISK   Stub File:  @INBTDIR

      ..\..\OS2\APPS   Stub File:  @APPSDIR

      ..\..\OS2\SYSTEM\RAS   Stub File:  @RASDIR

      ..\..\OS2\SYSTEM\TRACE   Stub File:  @TRACDIR

      ..\..\LANGUAGE\CODEPAGE   Stub File:  @CDPGDIR


   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   APPEND.EXE    APPEND.EX_     18    11/15/2000  23:35     7762  7621ECE5
   ARACONV.EXE   ARACONV.EX_    16    11/23/1999  20:12    62151  F784F7D0
   ASIACOL.DLL   ASIACOL.DL_    11    10/12/2000  15:54   158758  1ECA61A1
   ASSIGN.COM    ASSIGN.CO_     18    11/15/2000  23:35     2757  4DBB1DAD
   ATTRIB.EXE    ATTRIB.EX_     16    11/15/2000  23:35    37789  C652FFB9
   AVIO.DLL      AVIO.DL_       14    10/13/2000  10:12    53921  F4FA2A43
   BACKUP.EXE    BACKUP.EX_     17    11/15/2000  23:42    34944  D8A83CFF
   BDCALL32.DLL  BDCALL32.DL_   16    11/23/1999  20:11    33519  761AA009
   BDIME.DLL     BDIME.DL_      17    11/23/1999  20:12    11911  31E663B5
   BDVIEW.DLL    BDVIEW.DL_     16    11/15/2000  02:59    34888  FF485732
   BDWPCLS.DLL   BDWPCLS.DL_    17    11/15/2000  02:58    20144  A5A0A30E
   BE.KBL        BE.KB_         18    10/12/2000  16:00      972  9473C507
   BLDLEVEL.EXE  BLDLEVEL.EX_   16    10/06/2000  14:52    57842  DA887672
   BOOTDISK.EXE  BOOTDISK.EX_   15    01/11/2001  13:50    61563  6C697462
   BOOTDISK.HLP  BOOTDISK.HL_   17    07/12/2000  19:02    12264  40FD43D5
   BVHINIT.DLL   BVHINIT.DL_    17    09/15/2000  17:09    11158  79660E11
   BVHMPA.DLL    BVHMPA.DL_     17    09/15/2000  16:10    15293  616A1162
   BVHVGA.DLL    BVHVGA.DL_     16    09/15/2000  16:09    31875  C0904D4F
   BVHWNDW.DLL   BVHWNDW.DL_    17    09/15/2000  17:09    16797  DDF61B0D
   BVSCALLS.DLL  BVSCALLS.DL_   18    11/15/2000  18:31      512  8EB3628F
   BY.KBL        BY.KB_         18    10/12/2000  16:00     1292  12686C9F
   CA.KBL        CA.KB_         18    10/12/2000  16:00     1214  8CC69E65
   CACHE.EXE     CACHE.EX_      17    10/06/2000  18:37    13870  3A0206C9
   CARDINFO.DAT  CARDINFO.DA_   17    10/06/2000  11:51    55484  95DE233C
   CCHMAIN.EXE   CCHMAIN.EX_     9    11/14/2000  19:38   199408  8D0A6E74
   CCHUSER.DLL   CCHUSER.DL_    14    11/14/2000  19:37    63763  24B23C1B
   CDFS.IFS      CDFS.IF_       16    10/06/2000  18:51    45243  0B7A9F13
   CDFS.TDF      CDFS.TD_       18    10/06/2000  18:51     2113  785C2068
   CDROM.TBL     CDROM.TB_      18    09/05/2000  11:54     4371  EF56BE58
   CF.KBL        CF.KB_         18    10/12/2000  16:00      956  C70BE11E
   CHKDSK.COM    CHKDSK.CO_     15    11/15/2000  23:35    71232  49E77664
   CHKDSK.SYS    CHKDSK.SY_     18    10/06/2000  18:38      795  3BAD389C
   CHKDSK32.DLL  CHKDSK32.DL_   12    10/06/2000  18:49   139739  418F3B59
   CHKDSK32.EXE  CHKDSK32.EX_   18    10/06/2000  18:38     6417  48531C60

   
                       FixPak Corrective Service levels and disk layouts  43


                   January 12, 2001 - Warp 4 FixPak XRCM015

   CLOCK01.SYS   CLOCK01.SY_    18    09/22/2000  08:57     4560  E5017DAB
   CLOCK02.SYS   CLOCK02.SY_    18    09/22/2000  08:57     4318  352B25E2
   CMD.EXE       CMD.EX_        13    11/15/2000  23:37   100108  CDA89A71
   COMM.DRV      COMM.DR_       17    01/06/2000  06:54     9552  F29A6EE2
   COMMAND.COM   COMMAND.CO_    16    11/15/2000  23:36    43486  C0A8A14D
   COMP.COM      COMP.CO_       16    11/15/2000  23:38    35881  AC41A9F0
   CONTROL.INF   CONTROL.IN_    18    11/16/2000  11:50    22363  5C8D90E2
   CONTROL.PM    CONTROL.PM_    18    11/16/2000  01:36     8498  5F21A35F
   COUNTRY.SYS   COUNTRY.SY_    17    09/05/2000  22:35    50947  1936CC0B
   COUR.OFM      COUR.OF_       18    11/22/1999  11:22     6163  8932E1ED
   COUR.PFB      COUR.PF_       11    11/22/1999  11:23   137111  48043987
   COUR.PFM      COU1.PF_       18    11/22/1999  11:22      674  EB14B168
   COURB.OFM     COURB.OF_      18    11/22/1999  11:22     6173  30530A2B
   COURB.PFB     COURB.PF_      10    11/22/1999  11:23   140829  503DA489
   COURB.PFM     COUR1.PF_      18    11/22/1999  11:22      679  1EF9C4BB
   COURBI.OFM    COURBI.OF_     18    11/22/1999  11:22     6187  0F59E5D1
   COURBI.PFB    COURBI.PF_     11    11/22/1999  11:23   136240  56421E00
   COURBI.PFM    COURB1.PF_     18    11/22/1999  11:22      685  A4390DF0
   COURI.OFM     COURI.OF_      18    11/22/1999  11:22     6178  1CEF133A
   COURI.PFB     COURI.PF_      10    11/22/1999  11:23   137394  715E75E2
   COURI.PFM     COUR2.PF_      18    11/22/1999  11:22      681  A6EEB6F7
   COURIER.FON   COURIER.FO_    15    10/19/2000  13:03    77826  6ED05C3A
   COURIERI.FON  COURIERI.FO_   15    10/19/2000  12:59    86641  C6745C2D
   CPG01256.TBL  CPG01256.TB_   18    11/22/1999  12:17    27264  A5C721BD
   CREX.MSG      CREX.MS_       18    09/06/2000  12:42     2865  8188DE0E
   CREXUTIL.DLL  CREXUTIL.DL_   14    09/06/2000  12:42    68119  4D4A96EB
   CREXX.DLL     CREXX2.DL_     10    09/06/2000  12:42   266031  C716AA5F
   CYRIME.DLL    CYRIME.DL_     17    10/19/2000  12:43    21529  CED04287
   CZ.KBL        CZ.KB_         18    10/12/2000  16:00     1014  E4EC6917
   DDINSTAL.EXE  DDINSTAL.EX_   16    11/16/2000  01:54    52775  9761DF54
   DE.KBL        DE.KB_         18    10/12/2000  16:00      958  28E4F429
   DE453.KBL     DE453.KB_      18    10/12/2000  16:00     1354  1CF7C63C
   DEBUG.EXE     DEBUG.EX_      17    11/15/2000  23:38    28257  1735FC58
   DF_DEB.EXE    DF_DEB.EX_     13    11/15/2000  18:05   135989  D2462C66
   DF_RET.EXE    DF_RET.EX_     13    11/15/2000  16:51   135957  94CE7FB8
   DIBDRVR.DLL   DIBDRVR.DL_    18    10/19/2000  14:02     5627  7A65141B
   DICTATE.EXE   DICTATE.EX_    15    05/06/1998  11:58    51391  460F16F4
   DICTDLL.DLL   DICTDLL.DL_    15    12/21/1997  01:28    51187  D08EC5CA
   DISKCOMP.COM  DISKCOMP.CO_   16    11/15/2000  23:42    41697  FF49A6BF
   DISKCOPY.COM  DISKCOPY.CO_   16    11/15/2000  23:42    46196  10610E9E
   DISPLAY.DLL   DISPLAY.DL_    15    09/15/2000  15:58    46574  F71EB0D6
   DIVE.DLL      DIVE.DL_       14    10/06/2000  08:13    69662  B5D13AA0
   DK.KBL        DK.KB_         18    10/12/2000  16:00      928  72EC9538
   DMISL.EXE     DMISL.EX_      13    10/06/2000  21:03   144918  ADD48904
   DMQSPROF.DLL  DMQSPROF.DL_    7    09/15/2000  16:07    39033  6D5BE86E
   DOSCALL1.DLL  DOSCALL1.DL_   12    11/15/2000  18:13   137351  6AAC079E
   DOSCALL1.SYM  DOSCALL1.SY_   10    11/15/2000  18:13    43476  125AC493
   DOSCALL1.TDF  DOSCALL1.TD_   18    11/15/2000  16:50     5534  A9AE23D5
   DOSKEY.COM    DOSKEY.CO_     18    11/15/2000  23:38     6481  5322D179
   DOSKRNL       DOSKRNL.___    17    11/15/2000  18:14    31529  27D8932B
   DRVMAP.INF    DRVMAP.IN_     18    11/16/2000  01:36    12931  ADFC0363

   
                       FixPak Corrective Service levels and disk layouts  44


                   January 12, 2001 - Warp 4 FixPak XRCM015

   DSPIMRI.DLL   DSPIMRI.DL_    17    08/31/2000  13:22    18470  99C2032B
   DSPINSTL.EXE  DSPINSTL.EX_   13    10/02/2000  15:46   175640  C665A00A
   DSPRES.DLL    DSPRES1.DL_     8    10/19/2000  12:59   376488  C8B8B2CB
   DSPRES.DLL    DSPRES.DL_      8    10/19/2000  12:59   376488  C8BA06CB
   DTRACE.DOC    DTRACE.DO_     17    11/22/1999  11:25    75371  5B1E5F89
   DTRACE.EXE    DTRACE1.EX_    15    10/06/2000  21:10    74850  254E4F97
   DTRACE.EXE    DTRACE.EX_     15    10/06/2000  21:10    74850  254E7A17
   E.EXE         E.EX_          14    11/15/2000  00:29    63383  FCCD0970
   EAUTIL.EXE    EAUTIL.EX_     16    11/15/2000  23:38    38000  1B8645D6
   EDLIN.COM     EDLIN.CO_      18    11/15/2000  23:38     8268  7F037AAB
   EHXDLMRI.DLL  EHXDLMRI.DL_   17    11/15/2000  00:29    14373  B96DF9E7
   EJECT.EXE     EJECT.EX_      17    09/05/2000  22:44    29746  C21DF117
   EL.KBL        EL.KB_         18    10/12/2000  16:00     1396  8B8DE7D0
   EL459.KBL     EL459.KB_      18    10/12/2000  16:00     1372  797B7F1A
   ENGINE.EXE    ENGINE.EX_      7    07/23/1997  11:39   440424  CA47CBAA
   EPM.EXE       EPM.EX_        17    11/23/1999  17:44    24032  1787F472
   ERLOGGER.EXE  ERLOGGER.EX_   16    10/06/2000  14:10    48608  DEB8C0CF
   ERRLOG.DLL    ERRLOG.DL_      8    10/06/2000  14:09    72806  CF92B384
   ERRTXT.DLL    ERRTXT.DL_     17    11/15/2000  13:40    26714  741E43EA
   ES.KBL        ES.KB_         18    10/12/2000  16:00      920  3744F4D4
   ETKC603.DLL   ETKC603.DL_    12    11/23/1999  16:02   136124  B18E8724
   ETKE603.DLL   ETKE603.DL_     6    11/23/1999  16:02   767421  C1741876
   EZP2MRI.DLL   EZP2MRI.DL_    15    11/15/2000  00:30    96286  BC5F1246
   FDISK.COM     FDISK.CO_      14    11/15/2000  23:45   117697  8422539A
   FDISKPM.DLL   FDISKPM.DL_    18    11/15/2000  23:45    10805  803209CD
   FDISKPM.EXE   FDISKPM.EX_    15    11/15/2000  23:45    78916  2909E0BC
   FDISKPMH.HLP  FDISKPMH.HL_   17    11/15/2000  23:45    15156  0C111172
   FFCONFIG.DLL  FFCONFIG.DL_   17    10/06/2000  14:13    20551  485CCA4D
   FFDUMP.DLL    FFDUMP.DL_     15    10/06/2000  15:21    41217  D9207791
   FFGUI.DLL     FFGUI.DL_      17    10/06/2000  17:52    19787  5FC2A1D9
   FFIPC.DLL     FFIPC.DL_      17    10/06/2000  14:13    27201  F86D8B12
   FFPCT.DLL     FFPCT.DL_      17    10/06/2000  14:13    21588  96F267AA
   FFPROBE.DLL   FFPROBE.DL_    17    10/06/2000  14:50    24680  77EEB333
   FFST.DLL      FFST.DL_       17    10/06/2000  14:13    11425  B9B55D0A
   FFSTCONF.EXE  FFSTCONF.EX_   14    10/06/2000  15:21   104505  9E8F8833
   FFSTPCT.EXE   FFSTPCT.EX_    14    10/06/2000  15:21   105143  76829336
   FI.KBL        FI.KB_         18    10/12/2000  16:00      940  F4F2DB21
   FILT.DLL      FILT.DL_       17    10/13/2000  10:07    22890  F997AA11
   FIND.EXE      FIND.EX_       14    11/15/2000  23:38    31085  255DCB52
   FKA.DLL       FKA.DL_        17    11/22/1999  11:46    13997  66D06B79
   FORMAT.COM    FORMAT.CO_     15    11/15/2000  23:39    72064  23712C06
   FR.KBL        FR.KB_         18    10/12/2000  16:00      950  3C615CF1
   FSFILTER.SYS  FSFILTER.SY_   17    11/15/2000  18:14    12714  87B0310C
   GDI.EXE       GDI.EX_        10    01/06/2000  05:03   226144  907E2799
   GRADD.SYS     GRADD.SY_      18    09/15/2000  17:12     2754  03EBF6B1
   GRAFTABL.COM  GRAFTABL.CO_   18    11/15/2000  23:39     9922  A2FDBD71
   GRE2VMAN.DLL  GRE2VMAN.DL_   17    09/15/2000  22:04    18189  1874FBCE
   GSVDAEMN.EXE  GSVDAEMN.EX_   18    07/20/2000  02:35     4880  636E833A
   GSVINST.EXE   GSVINST.EX_    16    11/14/2000  19:01    34351  F6E06023
   HARDERR.EXE   HARDERR.EX_    17    11/15/2000  18:13    14377  E8CCA13C
   HDMON.EXE     HDMON.EX_      14    10/06/2000  17:56   112055  743E093C

   
                       FixPak Corrective Service levels and disk layouts  45


                   January 12, 2001 - Warp 4 FixPak XRCM015

   HELPMGR.DLL   HELPMGR.DL_     9    10/19/2000  13:01   250157  0A772627
   HELPMSG.EXE   HELPMSG.EX_    16    11/15/2000  23:39    37280  E3BDD31F
   HELV.FON      HELV.FO_       11    10/19/2000  13:03   171252  BE4D4630
   HELV.OFM      HELV.OF_       18    11/22/1999  11:22     6793  9CE6E30D
   HELV.PFB      HELV.PF_       11    11/22/1999  11:23   120578  014F23CF
   HELV.PFM      HEL1.PF_       18    11/22/1999  11:22     1096  6F229952
   HELVB.OFM     HELVB.OF_      18    11/22/1999  11:22     6785  54469E79
   HELVB.PFB     HELVB.PF_      11    11/22/1999  11:23   123085  0037C9CB
   HELVB.PFM     HELV1.PF_      18    11/22/1999  11:22     1089  84484E9F
   HELVBI.OFM    HELVBI.OF_     18    11/22/1999  11:22     6787  402ADDD9
   HELVBI.PFB    HELVBI.PF_     11    11/22/1999  11:23   124245  46A1595C
   HELVBI.PFM    HELVB1.PF_     18    11/22/1999  11:22     1087  06B4029D
   HELVI.FON     HELVI.FO_      11    10/19/2000  12:59   199523  A1519D3F
   HELVI.OFM     HELVI.OF_      18    11/22/1999  11:22     6772  3B1431CD
   HELVI.PFB     HELVI.PF_      11    11/22/1999  11:24   123355  48DC6098
   HELVI.PFM     HELV2.PF_      18    11/22/1999  11:22     1079  A1475F00
   HPFS.IFS      HPFS.IF_       13    10/06/2000  18:35   141890  D57F4803
   HPFS.TDF      HPFS.TD_       18    10/06/2000  18:35     1620  FE70CD53
   HPMGRMRI.DLL  HPMGRMRI.DL_   17    10/19/2000  18:54    22269  D2BB75F6
   HR.KBL        HR.KB_         18    10/12/2000  16:00      982  4371550F
   HU.KBL        HU.KB_         18    10/12/2000  16:00     1006  6334479F
   IBM1004       IBM1004.___    18    10/12/2000  15:51     3584  A0092D9E
   IBM1125       IBM1125.___    18    10/12/2000  15:51     4320  DB87BBDC
   IBM1131       IBM1131.___    18    10/12/2000  15:51     4320  866A4CE6
   IBM1140       IBM1140.___    18    10/12/2000  15:51     2816  776F524F
   IBM1141       IBM1141.___    18    10/12/2000  15:51     2784  9B334F2D
   IBM1142       IBM1142.___    18    10/12/2000  15:51     2816  7C962473
   IBM1143       IBM1143.___    18    10/12/2000  15:51     2816  FCDCC823
   IBM1144       IBM1144.___    18    10/12/2000  15:51     2784  9487FB0F
   IBM1145       IBM1145.___    18    10/12/2000  15:51     2784  81D2509F
   IBM1146       IBM1146.___    18    10/12/2000  15:51     2816  85F1F78F
   IBM1147       IBM1147.___    18    10/12/2000  15:51     2784  7A2A00FC
   IBM1148       IBM1148.___    18    10/12/2000  15:51     2816  01148969
   IBM1250       IBM1250.___    18    10/12/2000  15:51     3552  E92718A4
   IBM1251       IBM1251.___    18    10/12/2000  15:51     3328  3AC34B1F
   IBM1252       IBM1252.___    18    10/12/2000  15:51     3552  3AEEE128
   IBM1253       IBM1253.___    18    10/12/2000  15:51     3552  47CC3C81
   IBM1254       IBM1254.___    18    10/12/2000  15:51     3552  65D43268
   IBM1255       IBM1255.___    18    10/12/2000  15:51     3808  EEB4CC4B
   IBM1256       IBM1256.___    18    10/12/2000  15:51     4320  3DBDA938
   IBM1257       IBM1257.___    18    10/12/2000  15:51     3296  9D4D7F2D
   IBM813        IBM813.___     18    10/12/2000  15:51     3072  08A2AD8D
   IBM850        IBM850.___     18    10/12/2000  15:51     4320  C99AAD45
   IBM852        IBM852.___     18    10/12/2000  15:51     4608  A58DC710
   IBM857        IBM857.___     18    10/12/2000  15:51     4352  2B0AD70F
   IBM859        IBM859.___     18    10/12/2000  15:51     4320  1444A493
   IBM862        IBM862.___     18    10/12/2000  15:51     4576  ABE84D36
   IBM864        IBM864.___     18    10/12/2000  15:51     4576  A3F0D5CD
   IBM869        IBM869.___     18    10/12/2000  15:51     4320  12FD505A
   IBM923        IBM923.___     18    10/12/2000  15:51     2784  707674D1
   IBM924        IBM924.___     18    10/12/2000  15:51     2784  2DE319A7

   
                       FixPak Corrective Service levels and disk layouts  46


                   January 12, 2001 - Warp 4 FixPak XRCM015

   IBMOPTNS.DLL  IBMOPTNS.DL_   17    10/06/2000  11:51    22834  45B32886
   ICONEDIT.EXE  ICONEDIT.EX_   13    11/23/1999  16:42   164080  52992650
   IFGDI2VM.DRV  IFGDI2VM.DR_   15    09/15/2000  17:12    93136  7268974F
   INSCFG32.DLL  INSCFG32.DL_   16    11/16/2000  01:37    32098  437C5EAB
   INST_DOS.EXE  INST_DOS.EX_   16    10/19/2000  14:00    39114  80A38780
   INSTALL.EXE   INSTALL.EX_     7    01/11/2001  13:50   386456  53A1F69E
   IOPROC.DLL    IOPROC.DL_     16    10/13/2000  10:16    37880  91C2CA33
   IS.KBL        IS.KB_         18    10/12/2000  16:00      940  86D6BF6E
   IS458.KBL     IS458.KB_      18    10/12/2000  16:00      928  C23415ED
   ISGDI2VM.DRV  ISGDI2VM.DR_   15    09/15/2000  16:14    92048  C14AB2C9
   IT.KBL        IT.KB_         18    10/12/2000  16:00      876  F83B773E
   IT142.KBL     IT142.KB_      18    10/12/2000  16:00      854  901F70FB
   JOIN.EXE      JOIN.EX_       18    11/15/2000  23:39     4520  260E7E67
   JPEGIO.DLL    JPEGIO.DL_     15    10/13/2000  10:19    44357  DF0913B3
   KERNEL.SDF    KERNEL.SD_     14    11/15/2000  16:51    59155  C9F9282D
   KERNELD.SDF   KERNELD.SD_    14    11/15/2000  16:51    59147  E97AEF18
   KEYBOARD.DCP  KEYBOARD.DC_   17    10/12/2000  16:03   315109  33BC80C8
   KRNLRDEV.TDF  KRNLRDEV.TD_   18    11/15/2000  17:11     4232  C5B483F5
   KRNLRFS.TDF   KRNLRFS.TD_    18    11/15/2000  17:11     4793  A729B211
   KRNLRLDR.TDF  KRNLRLDR.TD_   18    11/15/2000  17:11     5384  0E5C5AAA
   KRNLRPG.TDF   KRNLRPG.TD_    18    11/15/2000  17:11     3209  2CAD0A4E
   KRNLRSEL.TDF  KRNLRSEL.TD_   18    11/15/2000  17:11     2783  79FE2812
   KRNLRSEM.TDF  KRNLRSEM.TD_   18    11/15/2000  17:11     1792  E4675F66
   KRNLRSM.TDF   KRNLRSM.TD_    18    11/15/2000  17:11     1196  2CD94AC0
   KRNLRTK.TDF   KRNLRTK.TD_    18    11/15/2000  17:11    12921  4862FE17
   KRNLRTOM.TDF  KRNLRTOM.TD_   18    11/15/2000  17:11      984  7D8D4AD6
   KRNLRVDM.TDF  KRNLRVDM.TD_   18    11/15/2000  17:11    15405  13A549D9
   KRNLRVM.TDF   KRNLRVM.TD_    18    11/15/2000  17:11     5542  53DA5C5F
   LABEL.COM     LABEL.CO_      17    11/15/2000  23:43    33805  8A081408
   LFAPI.DLL     LFAPI.DL_      17    10/06/2000  14:09    21178  EEE925A9
   LIBCM.DLL     LIBCM.DL_       9    11/22/1999  11:45   210916  5BC599EE
   LIBCN.DLL     LIBCN.DL_      15    11/22/1999  11:45    57340  676A0B04
   LIBCS.DLL     LIBCS.DL_      10    11/22/1999  11:45   192386  7E2C4E24
   LIBUNI.DLL    LIBUNI.DL_     14    10/12/2000  16:00    81372  C1127F47
   LMDLL.DLL     LMDLL.DL_      15    08/15/2000  09:15    76973  D52B54B0
   LOCALE.DLL    LOCALE.DL_     13    10/12/2000  16:00   107901  15E56505
   MAIN.CPL      MAIN.CP_       13    01/06/2000  05:17   149984  F8EFB307
   MAKETSF.EXE   MAKETSF.EX_    16    10/06/2000  21:10    51928  63B9D0FE
   MAPTSF.CMD    MAPTSF.CM_     18    11/22/1999  11:25    16803  1F2B489D
   MEM.EXE       MEM.EX_        16    11/15/2000  23:45    40126  14B5DCBC
   MIDI.SYS      MIDI.SY_       17    08/15/2000  08:46    26328  FA7B88A4
   MIDIMCD.DLL   MIDIMCD.DL_    18    10/13/2000  10:14     4118  1D3375FA
   MIGRATE.EXE   MIGRATE.EX_    13    11/16/2000  02:03   175675  0210F7B5
   MINSTALL.EXE  MINSTALL.EX_   11    10/06/2000  11:52   191774  8CE739E2
   MINXOBJ.DLL   MINXOBJ.DL_    16    11/14/2000  19:31    31886  BD6028F9
   MIRRORS.DLL   MIRRORS.DL_     3    09/06/2000  12:44   444744  4D9369F8
   MMODPTS.DLL   MMODPTS.DL_    10    10/13/2000  10:46   184022  12635668
   MMPARTS.DLL   MMPARTS.DL_     2    10/13/2000  10:45  1532232  EEF994D0
   MMPM.DLL      MMPM.DL_        7    10/13/2000  10:50   432003  CD8DD638
   MMPTMRI.DLL   MMPTMRI.DL_    12    10/06/2000  11:50   234514  712BE43D
   MMSNIFF.DLL   MMSNIFF.DL_    16    07/20/2000  04:43    33298  46EFB689

   
                       FixPak Corrective Service levels and disk layouts  47


                   January 12, 2001 - Warp 4 FixPak XRCM015

   MMSOUND.DRV   MMSOUND.DR_    18    01/06/2000  05:37     3456  97C527F0
   MODE.COM      MODE.CO_       15    11/15/2000  23:40    64245  53DBEEC2
   MONCALLS.DLL  MONCALLS.DL_   18    11/15/2000  18:31     5536  3EDB689D
   MONCALLS.TDF  MONCALLS.TD_   18    11/15/2000  18:31     1139  A167041D
   MORE.COM      MORE.CO_       16    11/15/2000  23:40    34855  C2747288
   MPGIO.DLL     MPGIO.DL_      14    10/13/2000  10:20    59269  CAF5BB04
   MSG.DLL       MSG.DL_        18    11/15/2000  18:31      512  CCB1ED52
   NAMEADD.EXE   NAMEADD.EX_    17    11/24/1999  13:10    23040  3DC869A2
   NAMECOPY.EXE  NAMECOPY.EX_   17    11/24/1999  13:10    23040  1C05214E
   NAMEDEL.EXE   NAMEDEL.EX_    17    11/24/1999  13:10    23040  65C869A3
   NAMEDSP.DLL   NAMEDSP.DL_    12    10/06/2000  15:03   123427  5BAD484E
   NAMEEXT.EXE   NAMEEXT.EX_    17    11/24/1999  13:10    23040  9DC869A5
   NAMEFW.DLL    NAMEFW.DL_     14    10/06/2000  15:03    72328  59361BFF
   NAMEMOD.EXE   NAMEMOD.EX_    17    11/24/1999  13:10    23040  4DC869A3
   NAMEMOVE.EXE  NAMEMOVE.EX_   17    11/24/1999  13:10    23040  2405214C
   NAMEREXX.DLL  NAMEREXX.DL_   13    10/06/2000  15:03    97779  EF3CD872
   NAMPIPES.DLL  NAMPIPES.DL_   18    11/15/2000  18:31     1024  5FCACCD0
   NL.KBL        NL.KB_         18    10/12/2000  16:00      954  431DC288
   NLS.DLL       NLS.DL_        18    11/15/2000  18:31      512  B0628263
   NO.KBL        NO.KB_         18    10/12/2000  16:00      920  2555DD8A
   NWIAPI.DLL    NWIAPI.DL_     17    11/15/2000  03:05    14770  3FA6E7D6
   OREXUTIL.DLL  ORXUTIL2.DL_   15    09/06/2000  12:43    41175  9BC71149
   OREXX.DLL     OREXX2.DL_      7    09/06/2000  12:43   490355  38E21AD5
   OS2CHAR.DLL   OS2CHAR.DL_    18    11/15/2000  18:31      512  896DE743
   OS2CHAR.TDF   OS2CHAR.TD_    18    11/15/2000  16:50    13889  D4E1119B
   OS2DASD.DMD   OS2DASD.DM_    16    08/15/2000  08:00    40910  CD519CB1
   OS2DUMP       OS2DUMP.___    16    11/15/2000  18:32    15101  6F76CFDB
   OS2K386.EXE   OS2K386.EX_    14    01/06/2000  05:06    80530  800E6178
   OS2KRNL       OS2KRNL.___     4    11/15/2000  17:11   845682  4E21F1C2
   OS2KRNLR.SYM  OS2KRNLR.SY_   12    11/15/2000  17:11   167188  2C207A6F
   OS2KRNLR.TDF  OS2KRNLR.TD_   18    11/15/2000  17:11    21026  5EE5E808
   OS2LDR.MSG    OS2LDR.MS_     18    11/15/2000  18:13     9169  8F0AAA64
   OS2MM.DLL     OS2MM.DL_       4    10/06/2000  11:52   219868  19F52741
   OS2SM.DLL     OS2SM.DL_      18    10/19/2000  14:20     1598  87503005
   OS2UGL        OS2UGL.___     18    10/12/2000  15:52    15616  96667256
   OSO001.MSG    OSO001.MS_     14    11/14/2000  16:14   188980  A7D284B4
   OSO001H.MSG   OSO001H.MS_    13    11/14/2000  16:14   265968  B1B90F57
   PARALLEL.PDR  PARALLEL.PD_   17    11/15/2000  00:27    15898  0EA61FAA
   PCMCIA.TBL    PCMCIA.TB_     18    04/14/2000  13:27     5114  F9E24825
   PDUMPSYS.EXE  PDUMPSYS.EX_   16    10/06/2000  21:17    47165  E603B960
   PDUMPUSR.EXE  PDUMPUSR.EX_   16    10/06/2000  21:17    47163  FEE0EF9B
   PICV.DLL      PICV.DL_       17    10/19/2000  12:59    26200  59732B53
   PICVIEW.DLL   PICVIEW.DL_    17    10/19/2000  18:53    14370  97F8367E
   PICVIEW.EXE   PICVIEW.EX_    14    10/19/2000  18:53    95770  1C6DA03D
   PL.KBL        PL.KB_         18    10/12/2000  16:00      980  5B4D3A89
   PL457.KBL     PL457.KB_      18    10/12/2000  16:00      882  F10269DE
   PMATM.DLL     PMATM.DL_       9    04/12/2000  11:39   224343  15C73B97
   PMBIDI.DLL    PMBIDI.DL_      5    11/23/1999  20:11    13611  08D96136
   PMCHKDSK.DLL  PMCHKDSK.DL_   18    11/15/2000  23:45     8223  B8316070
   PMCHKDSK.EXE  PMCHKDSK.EX_   17    11/15/2000  23:45    33303  3CA713CF
   PMCLIP.DLL    PMCLIP.DL_     17    10/19/2000  14:01    21253  99EC6E18

   
                       FixPak Corrective Service levels and disk layouts  48


                   January 12, 2001 - Warp 4 FixPak XRCM015

   PMCTLS.DLL    PMCTLS.DL_      5    10/19/2000  21:02   587798  89320509
   PMCTLS.SYM    PMCTLS.SY_     16    10/19/2000  21:02    44660  85EA57A0
   PMDDE.DLL     PMDDE.DL_      16    10/19/2000  21:12    28314  9DD53BEF
   PMDDEML.DLL   PMDDEML.DL_    16    10/19/2000  12:43    27814  82681B42
   PMDF.EXE      PMDF.EX_        9    10/06/2000  21:16   393388  B5D0947D
   PMDFMSG.DLL   PMDFMSG.DL_    15    10/06/2000  17:55    47788  4813FAD2
   PMDRAG.DLL    PMDRAG.DL_     18    10/19/2000  13:50     1731  8C66B469
   PMGPI.DLL     PMGPI.DL_       9    10/19/2000  12:38   248446  C468C795
   PMGPI.TDF     PMGPI.TD_      18    10/19/2000  12:38    12338  18BC9677
   PMGRE.DLL     PMGRE.DL_      18    10/19/2000  12:35     2231  815A9F54
   PMGRE.TDF     PMGRE.TD_      18    10/19/2000  21:04     1062  6013F07E
   PMMERGE.DLL   PMMERGE.DL_     3    10/19/2000  21:04  1268731  E7D4528F
   PMMERGE.SYM   PMMERGE.SY_    13    10/19/2000  21:04   117508  573ED03C
   PMMLE.DLL     PMMLE.DL_      18    10/19/2000  14:25      673  388DB999
   PMMRGRES.DLL  PMMRGRES.DL_   13    10/19/2000  18:46   134656  9AC1199F
   PMPIC.DLL     PMPIC.DL_      15    10/19/2000  14:00    47206  CDF1F652
   PMPIC.TDF     PMPIC.TD_      18    10/19/2000  14:34      400  AAA168A3
   PMPRE.DLL     PMPRE.DL_      15    09/15/2000  15:58    46574  37B94AEA
   PMPRINT.QPR   PMPRINT.QP_    17    11/15/2000  00:21    12107  9BE15088
   PMREXX.EXE    PMREXX.EX_     15    10/06/2000  15:04    78885  E82EA50E
   PMSDMRI.DLL   PMSDMRI.DL_    17    10/19/2000  18:42    16384  0B28DEFC
   PMSEEK.EXE    PMSEEK.EX_     17    11/15/2000  23:46    44597  40C31C5E
   PMSHAPI.DLL   PMSHAPI.DL_    18    10/19/2000  12:45     4549  84CA9933
   PMSHAPI.TDF   PMSHAPI.TD_    18    10/19/2000  21:04     6726  D94221E4
   PMSHELL.EXE   PMSHELL.EX_    18    11/14/2000  18:48     6028  084C898C
   PMSHLTKT.DLL  PMSHLTKT.DL_   15    09/06/2000  12:45    44232  A1FD720F
   PMSPL.DLL     PMSPL.DL_       8    11/15/2000  00:21   319185  37831FD6
   PMSPL.SYM     PMSPL.SY_      17    11/15/2000  00:21    32340  F1E23ED3
   PMSPL.TDF     PMSPL.TD_      18    11/14/2000  17:58     4491  6397698E
   PMSPOOL.EXE   PMSPOOL.EX_    18    11/14/2000  18:51     9590  5950C3D9
   PMUNIF.DLL    PMUNIF.DL_     15    10/19/2000  14:00    43823  54464C46
   PMVDMP.DLL    PMVDMP.DL_     15    10/19/2000  18:55    45961  2606FDFB
   PMVDMP.TDF    PMVDMP.TD_     18    10/19/2000  21:13     2661  081AC164
   PMVIOP.DLL    PMVIOP.DL_     14    10/19/2000  18:55    64460  CE9C13C1
   PMVIOP.SYM    PMVIOP.SY_     18    10/19/2000  18:55     7620  7DB3994E
   PMVIOP.TDF    PMVIOP.TD_     18    10/19/2000  21:12     3551  2636316D
   PMWIN.DLL     PMWIN.DL_      18    10/19/2000  12:41    11264  341D49B1
   PMWIN.TDF     PMWIN.TD_      18    10/19/2000  21:04     9567  0EC583E5
   PMWIN32.SDF   PMWIN32.SD_    16    10/19/2000  12:43   313392  B4B104AE
   PMWINX.DLL    PMWINX.DL_      6    10/19/2000  18:53   530855  02F6247A
   PMWP.DLL      PMWP.DL_        1    11/15/2000  03:02  1063363  F0D9A67A
   PMWP.SYM      PMWP.SY_       14    11/15/2000  03:02   103796  036720DF
   PMWP.TDF      PMWP.TD_       18    11/15/2000  03:02    13825  3CBA6F84
   PMWPMRI.DLL   PMWPMRI.DL_    15    11/15/2000  00:18    58407  B4447E7F
   PNP.DLL       PNP.DL_        16    11/14/2000  19:35    28297  9CB5FD75
   PNP.SYS       PNP.SY_        18    08/15/2000  08:49     2152  2CA5C700
   PNPMRI.DLL    PNPMRI.DL_     17    11/15/2000  00:24    31781  5E73EF92
   PO.KBL        PO.KB_         18    10/12/2000  16:00      926  8CBC72BA
   PRINT.COM     PRINT.CO_      17    11/15/2000  23:40    34177  53EE3271
   PROCDUMP.DOC  PROCDUMP.DO_   17    11/22/1999  11:25    62998  5680E87C
   PROCDUMP.EXE  PROCDUMP.EX_   16    10/06/2000  21:17    66591  E1590C14

   
                       FixPak Corrective Service levels and disk layouts  49


                   January 12, 2001 - Warp 4 FixPak XRCM015

   PROGMAN.EXE   PROGMAN.EX_    15    01/06/2000  05:15   115984  D8646935
   PSFILES.EXE   PSFILES.EX_    17    11/15/2000  23:40    10229  DA92DC8D
   PSSDMON.EXE   PSSDMON.EX_    17    10/30/2000  11:25    41533  C52DEA6F
   PSSEMS.EXE    PSSEMS.EX_     17    11/15/2000  23:40    11717  AD34F58D
   PSTAT.EXE     PSTAT.EX_      17    11/15/2000  23:40    14661  CC51F411
   QUECALLS.DLL  QUECALLS.DL_   18    11/15/2000  18:31     1024  D0C33A6E
   QUECALLS.TDF  QUECALLS.TD_   18    11/15/2000  16:50     1299  C1001BC9
   RAS001.MSG    RAS001.MS_     17    10/06/2000  17:49    30690  1F4BBBBD
   RASH.MSG      RASH.MS_       18    10/06/2000  17:49    12818  D4CCB507
   README.DBG    README.DB_     18    09/06/2000  12:44     2463  F82C4618
   RECOVER.COM   RECOVER.CO_    16    11/15/2000  23:46    46656  6B7FFB54
   REGCONV.EXE   REGCONV.EX_    16    11/24/1999  13:44    52758  C0CED0F0
   REGEDIT.HLP   REGEDIT.HL_    17    01/06/2000  06:59    22681  99F9E55E
   REGEDIT2.EXE  REGEDIT2.EX_    5    11/24/1999  13:45   970752  42E9A152
   REGISTRY.DLL  REGISTRY.DL_   15    11/24/1999  13:02    81440  824B143E
   REGISTRY.MSG  REGISTRY.MS_   18    11/24/1999  13:45      624  236A2470
   REGISTRY.TDF  REGISTRY.TD_   18    11/24/1999  13:02      984  E7DBD05C
   REPLACE.EXE   REPLACE.EX_    16    11/15/2000  23:46    41072  B9650138
   RESTORE.EXE   RESTORE.EX_    16    11/15/2000  23:47    39216  2DA4AED3
   REX.MSG       REX.MS_        18    09/06/2000  12:42     2865  603C7657
   REXX.DLL      CREXX1.DL_     10    09/06/2000  12:42   266031  42250B8E
   REXX.DLL      OREXX1.DL_      6    09/06/2000  12:43   490355  1A1B8CC6
   REXX.IMG      REXX.IM_       14    09/06/2000  12:42   283636  D71F239D
   REXXAPI.DLL   REXXAPI.DL_    16    09/06/2000  12:42    40995  14493324
   REXXC.EXE     REXXC.EX_      18    09/06/2000  12:42     2758  D07F5D4F
   REXXCRT.DLL   REXXCRT.DL_    14    09/06/2000  12:42    79348  C14ED1D8
   REXXUTIL.DLL  REXXUTIL.DL_   14    09/06/2000  12:42    68119  4D4EA6EB
   REXXUTIL.DLL  ORXUTIL1.DL_   15    09/06/2000  12:43    41175  1BC74688
   RINSTPRN.EXE  RINSTPRN.EX_   10    11/15/2000  00:30   210996  A5F9A40F
   RO.KBL        RO.KB_         18    10/12/2000  16:00      944  E3336C36
   RSPDDI.EXE    RSPDDI.EX_     17    11/16/2000  01:54    29753  2C264DD6
   RSPDSPI.EXE   RSPDSPI.EX_    13    10/02/2000  15:46   143398  921C6111
   RSPIMRI.DLL   RSPIMRI.DL_    17    08/31/2000  13:22    18479  59384235
   RSPINST.EXE   RSPINST.EX_     1    03/09/2000  09:49   430912  54525E2E
   RSRV.EXE      RSRV.EX_       13    10/06/2000  15:03    77987  190866DE
   RU.KBL        RU.KB_         18    10/12/2000  16:00     1144  0E8F25DF
   RXVIDCFG.DLL  RXVIDCFG.DL_   17    09/15/2000  17:10    14741  A1B7AF07
   SBFILTER.DLL  SBFILTER.DL_   17    09/15/2000  17:13    14861  EB0E5706
   SCENTER.DLL   SCENTER.DL_     8    11/15/2000  00:28   295287  F386C6CD
   SD.KBL        SD.KB_         18    10/12/2000  16:00     1036  42B288FE
   SEAMLESS.DLL  SEAMLESS.DL_   16    10/19/2000  21:13    49167  F1F9F519
   SECUTIL.DLL   SECUTIL.DL_    17    10/30/2000  11:25    21468  EE20F3E8
   SEINST.EXE    SEINST.EX_     16    11/16/2000  01:39    48707  86A2F779
   SEMAINT.EXE   SEMAINT.EX_    15    03/09/2000  09:39    68064  F41535B0
   SERIAL.PDR    SERIAL.PD_     17    11/15/2000  00:20    19126  1A4371E8
   SESAPI.DLL    SESAPI.DL_     17    10/30/2000  11:24    24203  ED54FAF0
   SESDD32.SYS   SESDD32.SY_    14    10/30/2000  11:26   118834  299C9B13
   SESMGR.DLL    SESMGR.DL_     18    11/15/2000  18:31     1536  6534B911
   SESMGR.TDF    SESMGR.TD_     18    11/15/2000  16:50     1877  4D4EC693
   SESSHELL.EXE  SESSHELL.EX_   17    10/30/2000  11:25    29805  86BACFB0
   SETBOOT.EXE   SETBOOT.EX_    17    11/15/2000  23:44    20400  B19EC5FC

   
                       FixPak Corrective Service levels and disk layouts  50


                   January 12, 2001 - Warp 4 FixPak XRCM015

   SETDEFV.CMD   SETDEFV.CM_    18    10/05/2000  13:50     1652  AA7ED994
   SF.KBL        SF.KB_         18    10/12/2000  16:00     1036  5D6FBB81
   SHPIINST.DLL  SHPIINST.DL_   16    10/19/2000  20:57    37304  5D86AF59
   SK.KBL        SK.KB_         18    10/12/2000  16:00     1008  CC0A6A86
   SL.KBL        SL.KB_         18    10/12/2000  16:00      982  D1DE23B6
   SOFTDRAW.DLL  SOFTDRAW.DL_    5    10/19/2000  12:32   416439  5D867332
   SOM.DLL       SOM.DL_        12    06/30/1999  16:33    92009  A7AC8525
   SORT.EXE      SORT.EX_       17    11/15/2000  23:40    32047  2D518487
   SPCHOBJ.DLL   SPCHOBJ.DL_    12    12/21/1997  01:27   132899  E393DB77
   SPL1B.DLL     SPL1B.DL_      18    11/14/2000  17:58     7125  E590C70C
   SPOOLCP.DLL   SPOOLCP.DL_    17    11/14/2000  18:05    10210  FF56BF98
   SQ.KBL        SQ.KB_         18    10/12/2000  16:00      824  0379CFE8
   SSM.DLL       SSM.DL_        18    10/06/2000  08:13     4118  C323804D
   SSMDD.SYS     SSMDD.SY_      17    10/06/2000  08:12    36813  D4B233BF
   STRACE.EXE    STRACE.EX_     16    11/15/2000  23:48    56023  3203A925
   SUBST.EXE     SUBST.EX_      18    11/15/2000  23:39     4520  4635C013
   SV.KBL        SV.KB_         18    10/12/2000  16:00      946  9BB3F832
   SVGAINST.DLL  SVGAINST.DL_   16    09/15/2000  17:17    31537  0EB2711D
   SVMC.DLL      SVMC.DL_       13    10/13/2000  10:10    98391  E30AAAF8
   SVSH.DLL      SVSH.DL_       17    10/13/2000  10:11    23082  10D71004
   SW.DLL        SW.DL_         14    10/06/2000  08:15    66505  2585AB3F
   SWITCHRX.CMD  SWITCHRX.CM_   18    09/06/2000  12:43     7928  13CA9FC1
   SYMB.PFM      SYM1.PF_       18    11/22/1999  11:22      679  EC2CE0BD
   SYSDUMP.EXE   SYSDUMP.EX_    17    10/06/2000  21:17    28701  06967DF9
   SYSINST2.EXE  SYSINST2.EX_   12    03/09/2000  09:45   185008  99ACD1B1
   SYSINSTX.COM  SYSINSTX.CO_   16    11/15/2000  23:41    39616  6BCFA8D8
   SYSLEVEL.EXE  SYSLEVEL.EX_   16    11/16/2000  01:38    44800  4D172E15
   SYSLEVEL.FPK  SYSLEVEL.FP_   18    01/08/2001  10:32      165  11082328
   SYSLEVEL.MSG  SYSLEVEL.MS_   18    03/09/2000  09:50     1697  5AF96607
   SYSLOGPM.EXE  SYSLOGPM.EX_   12    10/06/2000  14:09   215355  D088C92D
   SYSMONO.FON   SYSMONO.FO_    17    10/19/2000  13:03    21294  62FF1AAA
   SYSMONOI.FON  SYSMONOI.FO_   16    10/19/2000  14:00    35841  3EA946D6
   SYSSPLIT.CMD  SYSSPLIT.CM_   18    11/22/1999  11:25     3712  A308EBC8
   TDFLST.CMD    TDFLST.CM_     18    11/22/1999  11:25    13564  7BB43592
   TEDIT.EXE     TEDIT.EX_      17    11/15/2000  23:47     9512  11159ECE
   TEDIT.HLP     TEDIT.HL_      18    11/15/2000  23:34    14597  679BB4CB
   TESTCFG.SYS   TESTCFG.SY_    17    07/20/2000  04:00     9808  402444E9
   TEXTCON1.EXE  TEXTCON1.EX_    9    11/23/1999  20:12    49011  9916B6FC
   TFFLST.CMD    TFFLST.CM_     18    11/22/1999  11:25     4638  E5A615D0
   TIMES.FON     TIMES.FO_      12    10/19/2000  13:03   166150  8B4CE282
   TIMESI.FON    TIMESI.FO_     11    10/19/2000  12:59   181173  AA7007ED
   TNR.OFM       TNR.OF_        18    11/22/1999  11:22     6809  D815154B
   TNR.PFB       TNR.PF_        10    11/22/1999  11:24   145785  BD3CE8BE
   TNR.PFM       TN1.PF_        18    11/22/1999  11:22     1103  474C4E38
   TNRB.OFM      TNRB.OF_       18    11/22/1999  11:22     6825  BEC21108
   TNRB.PFB      TNRB.PF_       10    11/22/1999  11:24   148564  FD4A88FF
   TNRB.PFM      TNR1.PF_       18    11/22/1999  11:22     1112  604493E3
   TNRBI.OFM     TNRBI.OF_      18    11/22/1999  11:22     6839  70E1C7B5
   TNRBI.PFB     TNRBI.PF_       9    11/22/1999  11:24   159652  799BB739
   TNRBI.PFM     TNRB1.PF_      18    11/22/1999  11:22     1118  62DE75CD
   TNRI.OFM      TNRI.OF_       18    11/22/1999  11:22     6830  23B85F2A

   
                       FixPak Corrective Service levels and disk layouts  51


                   January 12, 2001 - Warp 4 FixPak XRCM015

   TNRI.PFB      TNRI.PF_        9    11/22/1999  11:24   157010  4E813584
   TNRI.PFM      TNR2.PF_       18    11/22/1999  11:22     1114  67AE659D
   TR.KBL        TR.KB_         18    10/12/2000  16:00      962  4F794335
   TR440.KBL     TR440.KB_      18    10/12/2000  16:00     1042  1E3CC0D0
   TRACE.DOC     TRACE.DO_      17    09/05/2000  12:11    64057  95DDD40E
   TRACE.EXE     TRACE.EX_      16    11/15/2000  23:47    56064  D4F84200
   TRACEDLL.DLL  TRACEDLL.DL_   15    10/06/2000  21:11    46987  C2341404
   TRACEFMT.EXE  TRACEFMT.EX_   12    11/15/2000  23:51   232067  A3E9E482
   TRACEGET.EXE  TRACGET1.EX_   17    10/06/2000  21:10    29930  05569661
   TRACEGET.EXE  TRACEGET.EX_   17    10/06/2000  21:10    29930  05569661
   TRAPDUMP.EXE  TRAPDUMP.EX_   17    10/06/2000  21:17    30236  B9939FF7
   TRAPLOG.EXE   TRAPLOG.EX_    17    10/06/2000  21:17    28191  F269D507
   TRC0000.TFF   TRC0000.TF_    18    11/15/2000  17:11      189  78DB263E
   TRC0001.TFF   TRC0001.TF_    18    11/24/1999  13:02     1370  17F81D51
   TRC0003.TFF   TRC0003.TF_    18    11/15/2000  17:11     1503  79DD8690
   TRC0004.TFF   TRC0004.TF_    18    11/15/2000  17:11     4754  4562826C
   TRC0005.TFF   TRC0005.TF_     4    11/15/2000  17:11    49321  E063153B
   TRC0006.TFF   TRC0006.TF_    18    11/15/2000  17:11    12356  B055674E
   TRC0007.TFF   TRC0007.TF_    18    11/15/2000  19:58     3336  601FB047
   TRC0008.TFF   TRC0008.TF_    18    08/15/2000  07:55      544  456B3ED2
   TRC0010.TFF   TRC0010.TF_    18    11/15/2000  16:50    13647  C63AD6DD
   TRC0012.TFF   TRC0012.TF_    18    11/15/2000  18:31     1247  4B138575
   TRC0016.TFF   TRC0016.TF_    18    11/15/2000  16:50     1673  8106FBAA
   TRC0017.TFF   TRC0017.TF_    18    11/15/2000  16:50     5561  28B3BD66
   TRC0018.TFF   TRC0018.TF_    18    11/15/2000  16:50    39488  6DC61365
   TRC006D.TFF   TRC006D.TF_    18    10/06/2000  09:16    24181  FB89BB28
   TRC00C0.TFF   TRC00C0.TF_     3    10/19/2000  21:04    15970  172D7C66
   TRC00C2.TFF   TRC00C2.TF_    17    10/19/2000  21:04    25994  38380A06
   TRC00C3.TFF   TRC00C3.TF_    18    10/19/2000  21:04     3984  496F4ABD
   TRC00C4.TFF   TRC00C4.TF_    18    10/19/2000  14:34      288  6225B2A4
   TRC00C5.TFF   TRC00C5.TF_    17    10/19/2000  12:38    32994  87067818
   TRC00C6.TFF   TRC00C6.TF_    18    11/14/2000  17:58     7146  F49C8681
   TRC0100.TFF   TRC0100.TF_    18    11/15/2000  17:11     7219  FB080949
   TRC0101.TFF   TRC0101.TF_    18    11/15/2000  17:11     7968  B4168FEE
   TRC0102.TFF   TRC0102.TF_    17    11/15/2000  17:11    29256  FDC17753
   TRC0103.TFF   TRC0103.TF_    18    11/15/2000  17:11     9590  88F67449
   TRC0104.TFF   TRC0104.TF_    18    11/15/2000  17:11     5134  61087FB7
   TRC0105.TFF   TRC0105.TF_    18    11/15/2000  17:11    24421  FE711FDC
   TRC0106.TFF   TRC0106.TF_    18    11/15/2000  17:11     1549  FBDE5090
   TRC0107.TFF   TRC0107.TF_    18    11/15/2000  17:11     4516  9B2B5C4B
   TRC0108.TFF   TRC0108.TF_    18    11/15/2000  17:11     9505  42F6E19A
   TRC0109.TFF   TRC0109.TF_    18    11/15/2000  17:11     2535  CF7DB3E4
   TRC010A.TFF   TRC010A.TF_    18    11/15/2000  17:11     1130  33D8C181
   TRC0118.TFF   TRC0118.TF_    18    10/06/2000  18:37     2526  47E64B05
   TRC0119.TFF   TRC0119.TF_    18    10/06/2000  18:53     3786  6E22B08C
   TRC012C.TFF   TRC012C.TF_    18    10/19/2000  21:13     5361  CD6B9471
   TRC012D.TFF   TRC012D.TF_    18    10/19/2000  21:12     7870  4DF5F2E1
   TRC012E.TFF   TRC012E.TF_    18    11/15/2000  03:02    32972  8DAC7F62
   TRCFORMT.DLL  TRCFORMT.DL_   16    11/15/2000  23:52    27579  A8481087
   TRCUST.EXE    TRCUST.EX_     15    11/15/2000  23:48    98773  D4109979
   TREE.COM      TREE.CO_       16    11/15/2000  23:41    34185  95592D1A

   
                       FixPak Corrective Service levels and disk layouts  52


                   January 12, 2001 - Warp 4 FixPak XRCM015

   TRSPOOL.DOC   TRSPOOL.DO_    18    11/22/1999  11:25     6638  7C5EA5A2
   TRSPOOL.EXE   TRSPOOL1.EX_   17    10/06/2000  21:10    42054  66643F12
   TRSPOOL.EXE   TRSPOOL.EX_    17    10/06/2000  21:10    42054  66643F12
   TRSTOP.EXE    TRSTOP.EX_     17    10/06/2000  21:10    23486  4BEB79C7
   TRUETYPE.DLL  TRUETYPE.DL_   12    04/12/2000  11:40   128567  2661D3D5
   UA.KBL        UA.KB_         18    10/12/2000  16:00     1476  755FD8ED
   UCDFS.DLL     UCDFS.DL_      17    09/05/2000  20:56    13264  808A1B0D
   UCONV.DLL     UCONV.DL_      15    10/12/2000  16:00    22819  052AEC7F
   UHPFS.DLL     UHPFS.DL_      14    10/06/2000  18:49   106512  ECC6E827
   UK.KBL        UK.KB_         18    10/12/2000  16:00      816  87A7B2C9
   UK168.KBL     UK168.KB_      18    10/12/2000  16:00      850  56BC236E
   ULSACT01.MSG  ULSACT01.MS_   17    10/12/2000  15:52      907  CD793741
   ULSCAU01.MSG  ULSCAU01.MS_   14    10/12/2000  15:52      899  5C22952F
   ULSDET01.MSG  ULSDET01.MS_   11    10/12/2000  15:52      903  A12BE1BE
   ULSERR01.MSG  ULSERR01.MS_   18    10/12/2000  15:52     1967  AD03FAC9
   UNDELETE.COM  UNDELETE.CO_   16    11/15/2000  23:52    36953  8D5A6E88
   UNICODE.SYS   UNICODE.SY_    17    10/12/2000  16:00    20014  4983D17F
   UNIKBD.DLL    UNIKBD.DL_     16    10/12/2000  16:00    28291  EDE015C1
   UNINSTAL.EXE  UNINSTAL.EX_   13    01/11/2001  13:50    97481  F416017B
   UNPACK2.EXE   UNPACK2.EX_    14    11/16/2000  02:08    79840  CCF5ACF1
   USER.EXE      USER.EX_        6    01/06/2000  05:31   281424  9C2BD73A
   USINTER.KBL   USINTER.KB_    18    10/12/2000  16:00     1032  BCAF615F
   VBIOS.SYS     VBIOS.SY_      18    11/23/1999  11:45     8816  6AA099BA
   VCMOS.SYS     VCMOS.SY_      18    11/23/1999  11:45     2272  C3B68EC9
   VDMA.SYS      VDMAPS2.SY_    17    11/23/1999  11:46    14329  9856283A
   VDMA.SYS      VDMAAT.SY_     17    11/23/1999  11:46    11465  50ECE8CF
   VDPMI.SYS     VDPMI.SY_      17    11/23/1999  11:46    30626  DE4E5F18
   VDPX.SYS      VDPX.SY_       17    11/23/1999  11:47    26322  761ABE9C
   VGA.DSP       VGA.DS_        18    09/05/2000  11:59     8731  1FA1842C
   VIDEOCFG.DLL  VIDEOCFG.DL_   15    09/15/2000  16:08    38126  0315EFBC
   VIEW.EXE      VIEW.EX_       16    10/19/2000  18:54    33408  3D2840B6
   VIOCALLS.DLL  VIOCALLS.DL_   18    10/19/2000  14:01     2048  E44756F1
   VIOTBL.DCP    VIOTBL.DC_     16    10/12/2000  16:00   225355  40375D9E
   VIOTBL.ISO    VIOTBL.IS_     16    10/12/2000  16:00   230105  26DA121C
   VMAN.DLL      VMAN.DL_       15    09/15/2000  22:04    46745  B2C3BA5A
   VMANWIN.SYS   VMANWIN.SY_    18    07/10/2000  14:07     3040  C2F3E282
   VPIC.SYS      VPIC.SY_       18    11/23/1999  11:49     9942  C81F2F64
   VPICPARM.SYS  VPICPARM.SY_   18    11/23/1999  11:49      736  AF551DBA
   VTIMER.SYS    VTIMER.SY_     18    11/23/1999  11:49    10560  68AF4438
   VW32S.SYS     VW32S.SY_      17    11/23/1999  11:51    18338  52CBEA2A
   VWIN.SYS      VWIN.SY_       17    11/23/1999  11:50    27104  94AAC806
   WCFGMRI.DLL   WCFGMRI.DL_    18    11/15/2000  00:19     6694  B35A7B44
   WD24B.DSP     WD24B.DS_      13    09/05/2000  11:59    32662  66AE35CF
   WELCMMRI.DLL  WELCMMRI.DL_   17    11/15/2000  00:31    14409  5F79F027
   WINCFG.DLL    WINCFG.DL_     17    11/15/2000  03:03    13379  5D961972
   WINFILE.EXE   WINFILE.EX_    13    01/06/2000  05:16   149888  2CE2DF4A
   WINSCLIP.DLL  WINSCLIP.DL_   17    01/06/2000  05:12    14848  063DF8D5
   WINSDDE.DLL   WINSDDE.DL_     6    01/06/2000  05:12    18432  9C150F73
   WINSHELD.EXE  WINSHELD.EX_   17    01/06/2000  05:12    22528  8A7D4C30
   WINSMSG.DLL   WINSMSG.DL_    17    01/06/2000  05:11    28441  ED3A151E
   WPCLS.IMP     WPCLS.IM_       1    09/06/2000  12:42     8661  DA1CAFC2

   
                       FixPak Corrective Service levels and disk layouts  53


                   January 12, 2001 - Warp 4 FixPak XRCM015

   WPCOMET.DLL   WPCOMET.DL_    18    10/19/2000  18:47     8688  7C719F24
   WPCONFIG.DLL  WPCONFIG.DL_    8    11/15/2000  00:19   266408  B88CD5C8
   WPCONMRI.DLL  WPCONMRI.DL_   17    11/15/2000  00:19    33328  27C6D127
   WPDSRVP.DLL   WPDSRVP.DL_     2    11/14/2000  18:05    14194  8F0C425E
   WPHELP.HLP    WPHELP.HL_      4    02/24/2000  18:54   907971  A608BB80
   WPINET.DLL    WPINET.DL_     12    11/15/2000  03:10   117180  42DCEA66
   WPINTMRI.DLL  WPINTMRI.DL_   17    11/15/2000  00:26    12348  539A996E
   WPMSG.HLP     WPMSG.HL_      16    11/13/2000  09:46    55739  FFA6CE4B
   WPPRINT.DLL   WPPRINT.DL_     2    11/14/2000  19:32   364102  11DB9196
   WPPRINT.HLP   WPPRINT.HL_    11    11/15/2000  00:21    81096  62FB9DCF
   WPPRTMRI.DLL  WPPRTMRI.DL_   15    11/15/2000  00:21    69353  16E8E401
   WPREXX.IMP    WPREXX.IM_      8    09/06/2000  12:42     6313  5075963F
   WPSINIT.WPS   WPSINIT.WP_    17    09/06/2000  12:42    15877  ACB13059
   WPSINST.CMD   WPSINST.CM_    18    09/06/2000  12:42     2813  7D4D1420
   WW.EXE        WW.EX_         18    07/16/1998  14:31     8305  1E171079
   WWDLL.DLL     WWDLL.DL_       8    12/21/1997  01:29   276981  751EB71E
   WWHOOK.DLL    WWHOOK.DL_     17    12/21/1997  01:29    27230  893E24E8
   XCOPY.EXE     XCOPY.EX_      16    11/15/2000  23:41    52400  85E8F325
   XPG00420.TBL  XPG00420.TB_   18    11/22/1999  12:17    27264  48667C1E
   XPG00864.TBL  XPG00864.TB_   18    11/22/1999  12:17    27264  76725C6C

   ************************************************************************
   Product location on CSD:  A:\FIX\OS2.2
   Product name:  "SystŠme d'exploitation de base OS/2 IBM"
   Standard Edition  4.00
   Fixpak name:   XRCM015_   (Country = Canada (French Speaking))
   Pre-requisite CSD Level:  XRC4000_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*

   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   OS2LDR        OS2LDR.___     18    11/15/2000  18:05    45056  FEEF30B9


   
                       FixPak Corrective Service levels and disk layouts  54


                   January 12, 2001 - Warp 4 FixPak XRCM015

   ************************************************************************
   Product location on CSD:  A:\FIX\OS2.3
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRCM015_   (Country = Canada (French Speaking))
   Pre-requisite CSD Level:  XRC4010_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*

   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   APPDBUTL.DLL  APPDBUTL.DL_   18    02/25/2000  12:15    23529  4EAC16E2
   APPSTART.EXE  APPSTART.EX_   18    02/25/2000  12:15    33858  D7711D28
   NCAPPUTL.EXE  NCAPPUTL.EX_   18    02/25/2000  12:15    14624  29FB65C8
   OS2LDR        OS2LDR.___     18    11/15/2000  18:06    45056  8EE0F6F1
   PMLOGON.EXE   PMLOGON.EX_    18    01/24/2000  11:20    40109  5D5B81C3
   PRNCFG.DLL    PRNCFG.DL_     18    01/24/2000  11:21    81090  2D89657B
   TDESK.DLL     TDESK.DL_      18    01/25/2000  01:53     3909  E02D18EA
   TLOGOFF.EXE   TLOGOFF.EX_    18    01/25/2000  01:53     9581  388C4101
   TOBJECT.DLL   TOBJECT.DL_    18    01/25/2000  01:53     4970  443480F8
   TSHUTDWN.EXE  TSHUTDWN.EX_   18    01/25/2000  01:53     8695  FEBAC1E2

   ************************************************************************
   Product location on CSD:  A:\FIX\OS2.4
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRCM015_   (Country = Canada (French Speaking))
   Pre-requisite CSD Level:  XRC4010_
   System Id:  1000
   Component Id:  5639A6120
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

   
                       FixPak Corrective Service levels and disk layouts  55


                   January 12, 2001 - Warp 4 FixPak XRCM015


           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*

   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   APPSTART.EXE  APPSTART.EX_   18    03/22/2000  10:08    35022  D8F2F43F
   NCAPPUTL.EXE  NCAPPUTL.EX_   18    03/22/2000  10:08    21270  DAA7210D
   NCMONIT.DLL   NCMONIT.DL_    18    07/17/2000  14:14    55035  D88CEDED
   OS2LDR        OS2LDR.___     18    11/15/2000  18:06    45056  8EE0F6F1
   PMLOGON.EXE   PMLOGON.EX_    18    07/17/2000  15:34    57813  452101DF
   TSHUTDWN.EXE  TSHUTDWN.EX_   18    02/15/2000  12:41    10795  F1099ADA






























   
                       FixPak Corrective Service levels and disk layouts  56


                   January 12, 2001 - Warp 4 FixPak XRCM015

   10.0 SPACE UTILIZATION

   The FixPak installation process requires free space on the following
   drives:

   Space needed   Drive
   Up to 2MB      C:
   Up to 2MB      Boot drive (4MB if boot is C:)
   Up to 22MB     Drive with most free space, holds deferred files if
                  A:SERVICE method used.
   Up to 38MB     FixPak Archive/Backup for product with CSD level of
                  XRC4000
   Up to 38MB     FixPak Archive/Backup for product with CSD level of
                  XRC4010

   Note: The lines labeled "FixPak Archive/Backup for product with CSD level
   of" will be on the drive you specify and will occupy up to the size
   indicated for the Archive and for the Backup directories. If, for
   example, the indicated size is 30MB then the space actually occupied on
   the drive can be up to 60MB.


   10.0.1 RECOVERING FIXPAK ARCHIVE AND BACKUP SPACE

   Warning: Make sure you read and understand the following before removing
   the Archive and Backup files and directories.

   You can recover the space used for FixPak Archive and Backup files as
   long as you understand that doing this prevents you from being able to
   backout to the previous Backup or Archive level. If it becomes necessary
   at a later time to backout a FixPak, the only way you can do this is to
   reinstall Warp.

   Do the following to delete the FixPak Backup and Archive files and remove
   the files used by CSF to keep track of what service has been applied to
   your system.

   1.  Delete every instance of the following files on your system
       (search every drive and every directory they contain).
       þ   LOGF0000.*   (can be OS2 or MPM)
       þ   LOGSTART.*   (can be OS2 or MPM)
       þ   LOGARCH.*    (can be OS2 or MPM)
       þ   CSF_*.*
       þ   FIXSTART
   2.  Delete the files in the FixPak Archive and Backup directories on
       your harddisk.
   3.  Remove the FixPak Archive and Backup directories with the RMDIR
       command.




   
                                                       Space Utilization  57


                   January 12, 2001 - Warp 4 FixPak XRCM015

   10.0.2 TRADEMARKS

   The following terms are trademarks of the International Business Machines
   Corporation in the United States or other countries or both:

   þ  IBM
   þ  OS/2
   þ  WorkSpace On-Demand

   Other company, product, and service names may be trademarks or service
   marks of others.









































   
                                                       Space Utilization  58
