<        Installation instructions for Warp 4 FixPak XRIM012















        

        
        



        October 28, 1999

        This FixPak makes the products it services Year 2000 ready
        
        Build level 9.036
        
        This FixPak applies to:
        
        CSD Level:    XRI4000    Warp 4
        Component ID: 5639A6100
        Version:      4.00
        Type:         0C
        
        CSD Level:    XRI4010    WorkSpace On Demand Release 1
        Component ID: 5639A6100
        Version:      4.01
        Type:         0C
        
        CSD Level:    XRI4010    WorkSpace On Demand Release 2
        Component ID: 5639A6120
        Version:      4.01
        Type:         0C
        
        Requires Corrective Service Facility release f.141 or later
        
        OS/2 Fix Distribution
        Personal System Products
        Austin, Tx
        
        
        (c) Copyright International Business Machines Corporation, 1981, 1998.
        All rights Reserved.


                      October 28, 1999 - Warp 4 FixPak XRIM012


        October 28, 1999 - Warp 4 FixPak XRIM012


















































   
                                                                    Page  ii


                   October 28, 1999 - Warp 4 FixPak XRIM012

   CONTENTS


     1.0 Terms and Conditions  . . . . . . . . . . . . . . . . . . . . . . 1

     2.0 Do not use your system  . . . . . . . . . . . . . . . . . . . . . 2

     3.0 Installation Notes  . . . . . . . . . . . . . . . . . . . . . . . 3
       3.0.1 New PopUps During FixPak 12 Install   . . . . . . . . . . . . 3
       3.0.2 OS2DASD.DMD popup during install  . . . . . . . . . . . . . . 3
       3.0.3 Device Drivers removed from Fixpak  . . . . . . . . . . . . . 3
       3.0.4 Can't install Warp 4  . . . . . . . . . . . . . . . . . . . . 3
       3.0.5 Please use Fixtool f.141 or later   . . . . . . . . . . . . . 3
       3.0.6 OS2DUMP split into two versions   . . . . . . . . . . . . . . 4
       3.0.7 TRAP in ES16881$ after FP10 applied   . . . . . . . . . . . . 4
       3.0.8 System Sounds not working after FixPak applied  . . . . . . . 5
       3.0.9 Using Display Recovery Choices  . . . . . . . . . . . . . . . 5
       3.0.10 Installation of Java 1.1.4   . . . . . . . . . . . . . . . . 6
       3.0.11 DSPRES.DLL included in this FixPak   . . . . . . . . . . . . 6
       3.0.12 No products were found   . . . . . . . . . . . . . . . . . . 6
       3.0.13 Previous installation interrupted  . . . . . . . . . . . . . 7
       3.0.14 Unable to open Archive directory   . . . . . . . . . . . . . 7
       3.0.15 RC 932 doing CID install of Warp 4   . . . . . . . . . . . . 8
       3.0.16 Multimedia no longer selectable  . . . . . . . . . . . . . . 9
       3.0.17 MMPARTS.DLL/USER.EXE popup during install  . . . . . . . . . 9
       3.0.18 CSF0208 No products were found on the target ...   . . . . . 9
       3.0.19 CSF0248 Archive path is shared between mismatched  . . . . . 9
       3.0.20 CSF0249 Error opening or creating archive file.   . . . . . 10
       3.0.21 Printer installation process change   . . . . . . . . . . . 10
       3.0.22 Configuration Installation Distribution ( CID )   . . . . . 10

     4.0 Post Installation Notes  . . . . . . . . . . . . . . . . . . . . 11
       4.0.1 New Message Box in fix for APAR JR12954  . . . . . . . . . . 11
       4.0.2 RAS file changes   . . . . . . . . . . . . . . . . . . . . . 11
       4.0.3 Setting IRQ9 processing in config.sys for VPIC.SYS   . . . . 12
       4.0.4 Windows printer drivers leave a zombie thread running  . . . 12
       4.0.5 APAR JR09494 (trap exiting WINOS2 with MWAVE audio)  . . . . 13
       4.0.6 SYS3170 installing Lotus SmartSuite 96   . . . . . . . . . . 13
       4.0.7 Intermittent hangs   . . . . . . . . . . . . . . . . . . . . 13

     5.0 New Function   . . . . . . . . . . . . . . . . . . . . . . . . . 14
     5.1 Serviceability (RAS) Enhancements  . . . . . . . . . . . . . . . 14
     5.2 Querying file dates for files after Dec 31, 1999 in REXX   . . . 14
     5.3 Enhanced support for Workspace On-Demand   . . . . . . . . . . . 15
       5.3.1 PMLOGON user exits   . . . . . . . . . . . . . . . . . . . . 15
       5.3.2 Setup strings for public applications  . . . . . . . . . . . 18
       5.3.3 Command line options for TLOGOFF and TSHUTDWN  . . . . . . . 19
       5.3.4 PMLOGON No Progress Indicator option   . . . . . . . . . . . 19
       5.3.5 PMLOGON No System Modal Window option  . . . . . . . . . . . 20
     5.4 Euro Support   . . . . . . . . . . . . . . . . . . . . . . . . . 20
       5.4.1 Base OS/2 support  . . . . . . . . . . . . . . . . . . . . . 20

   
                                                               Contents  iii


                   October 28, 1999 - Warp 4 FixPak XRIM012

       5.4.2 Where Euro is not supported  . . . . . . . . . . . . . . . . 21
       5.4.3 Printing the Euro  . . . . . . . . . . . . . . . . . . . . . 22
     5.5 New Warp Registry Editor   . . . . . . . . . . . . . . . . . . . 22
     5.6 WorkSpace On Demand  . . . . . . . . . . . . . . . . . . . . . . 22
     5.7 IBM Open32   . . . . . . . . . . . . . . . . . . . . . . . . . . 22
     5.8 Graphics Adapter Device Drivers (GRADD)  . . . . . . . . . . . . 23
     5.9 Joliet-2 support in CDFS.IFS   . . . . . . . . . . . . . . . . . 23
     5.10 New (improved) CHKDSK   . . . . . . . . . . . . . . . . . . . . 23
       5.10.1 Using the new CHKDSK  . . . . . . . . . . . . . . . . . . . 23
       5.10.2 CHKDSK log formatter  . . . . . . . . . . . . . . . . . . . 25
     5.11 Automated Trap Screen Logging   . . . . . . . . . . . . . . . . 26
       5.11.1 SUPPRESSPOPUPS  . . . . . . . . . . . . . . . . . . . . . . 26
       5.11.2 TRAPLOG   . . . . . . . . . . . . . . . . . . . . . . . . . 26
       5.11.3 TRAPDUMP  . . . . . . . . . . . . . . . . . . . . . . . . . 27
       5.11.4 SYSDUMP   . . . . . . . . . . . . . . . . . . . . . . . . . 27
     5.12 Other README files  . . . . . . . . . . . . . . . . . . . . . . 28

     6.0 Corrective Service Facility  . . . . . . . . . . . . . . . . . . 29
       6.0.1 Required CSF level   . . . . . . . . . . . . . . . . . . . . 29
       6.0.2 Where you can find CSF code  . . . . . . . . . . . . . . . . 29
       6.0.3 Creating FixPak diskettes  . . . . . . . . . . . . . . . . . 30
     6.1 Residual FixPak files from OS/2 2.11 or Warp 3   . . . . . . . . 30
     6.2 Read-Only files  . . . . . . . . . . . . . . . . . . . . . . . . 31
     6.3 SYSLEVEL file locations  . . . . . . . . . . . . . . . . . . . . 31
     6.4 Relocated OS/2 file support  . . . . . . . . . . . . . . . . . . 32

     7.0 Installation Process   . . . . . . . . . . . . . . . . . . . . . 34
     7.1 Before installation  . . . . . . . . . . . . . . . . . . . . . . 34
     7.2 Method 1: Install from booted OS/2 partition.    . . . . . . . . 34
     7.3 Method 2: Install from alternate bootable media  . . . . . . . . 35
     7.4 Additional Corrective Service Facility information   . . . . . . 36
     7.5 FixPaks on CD-ROM  . . . . . . . . . . . . . . . . . . . . . . . 36

     8.0 CSD level of SYSLEVEL.OS2  . . . . . . . . . . . . . . . . . . . 37
       8.0.1 New SYSLEVEL.FPK   . . . . . . . . . . . . . . . . . . . . . 38

     9.0 FixPak Corrective Service levels and disk layouts  . . . . . . . 39

     10.0 Space Utilization   . . . . . . . . . . . . . . . . . . . . . . 52
       10.0.1 Recovering FixPak ARCHIVE and BACKUP space  . . . . . . . . 52
       10.0.2 TRADEMARKS  . . . . . . . . . . . . . . . . . . . . . . . . 53











   
                                                                Contents  iv


                   October 28, 1999 - Warp 4 FixPak XRIM012

   1.0 TERMS AND CONDITIONS

   Important - please read the following terms and conditions.

   Downloading the Service Fixes included in FixPak XRIM012 for OS/2 Warp 4
   indicates your acceptance of the following terms and conditions:

   1. You must be, and agree that you are, a current licensee of OS/2 Warp
      4.
   2. You may make copies of the OS/2 Service Fixes equal to the number of
      licensed copies of OS/2 Warp 4 you possess.
   3. You may only use the OS/2 Warp 4 Service Fixes included with FixPak
      XRIM012 for maintenance purposes.
   4. All other terms and conditions of your OS/2 Warp 4 license agreements
      apply to the Service Fixes; however, this does not extend any warranty
      and/or services, including but not limited to the "Initial
      Installation" period, outlined in such agreements.



































   
                                                     Terms and Conditions  1


                   October 28, 1999 - Warp 4 FixPak XRIM012

   2.0 DO NOT USE YOUR SYSTEM

   Once you begin a FixPak installation, do not try to use your system for
   any other purpose. Doing so may yield unexpected problems which can cause
   the FixPak installation to fail.















































   
                                                   Do not use your system  2


                   October 28, 1999 - Warp 4 FixPak XRIM012

   3.0 INSTALLATION NOTES



   3.0.1 NEW POPUPS DURING FIXPAK 12 INSTALL

   If you get a popup for module VIOTBL.ISO, VIOTBL.DCP, BDIME.DLL, or
   COUNTRY.SYS during installation of this FixPak, reply "Yes" to replace
   these modules with the ones in this FixPak.


   3.0.2 OS2DASD.DMD POPUP DURING INSTALL

   If you get a popup for module OS2DASD.DMD saying file on system is later
   than the one in this FixPak, reply "No" to replace it.


   3.0.3 DEVICE DRIVERS REMOVED FROM FIXPAK

    Beginning with Warp 4 FixPak XR_M011 and Warp 3 FixPak 41, most OS/2
    Device Drivers have been moved to a separate Device Driver FixPak. The
   first
    Device Driver FixPak, XR_D001, is now available where this FixPak is
    available.


   3.0.4 CAN'T INSTALL WARP 4

   If you can't get Warp 4 installed, check the OS/2 Device Driver Pak
   Online at:

   http://service.software.ibm.com/os2ddpak/readme.htm#disk1


   for the latest available device drivers to update your Installation disks
   with.


   3.0.5 PLEASE USE FIXTOOL F.141 OR LATER

   Beginning with Warp 3 FixPak 40 and Warp 4 FixPak 10, you must use
   Corrective Service Facility f.141 or later.  It has fixes for problems
   found in previous CSF builds as well as a fix to support RIPL servers
   where there may be in excess of 250 SYSLEVEL files. It also handles the
   type 1 (All FixPaks prior to 10 and 40) and type 2 (FixPaks 10 and 40 and
   later) FixPaks.

   If you try to use a CSF level prior to f.141 you will get a "CSF0208 No
   products were found on the target system to service" message.



   
                                                       Installation Notes  3


                   October 28, 1999 - Warp 4 FixPak XRIM012

   3.0.6 OS2DUMP SPLIT INTO TWO VERSIONS

   OS2Dump has been split into two versions. If you are installing this
   fixpak on PS/2 model 9595 machines, use the version located on the last
   fixpak diskette.  Also, if you are running older hardware (486s or early
   Pentiums), you may wish to use the OS2Dump located on the last fixpak
   diskette.

   We have encountered some problems with early implementations of the PCI
   Bus BIOS extensions (INT 1A) on certain processors and BIOS levels. We
   are not sure how many different machines and BIOSes are affected. We do
   know many of the PS/2 model 9595s have the problem. The end result of
   this is that the version of OS2Dump which supports PCI Bus machines does
   not work on some older hardware.  In order to continue to support the
   full range of hardware that OS/2 runs on, we have divided OS2Dump into a
   PCI version and an non-PCI version. If you are running fairly recent
   hardware, the PCI version of OS2Dump will work on your machine whether or
   not it has a PCI bus. All BIOS problems have been worked out.

   To reiterate, the problem occurs only on older hardware. If you are
   running a 486 or early Pentium (P60 or less), you may wish to use the
   non-PCI version located on the last fixpak diskette. If you are running a
   9595, you must use the non-PCI version located on the last fixpak
   diskette.

    If, after installing this FixPak, you encounter problems taking a
   standalone dump and your system fits description above, perform the
   following steps to install the non-PCI version of OS2DUMP located on last
   disk of this FixPak:

   1. Open an OS/2 window.
   2. Change to drive letter where OS/2 is installed.
   3. Enter "cd\" to get to the root directory.
   4. Enter OS/2 command "attrib -s -h -r os2dump" to unhide OS2DUMP.
   5. Enter "ren os2dump os2dump.pci"; save PCI version of OS2DUMP.
   6. Insert last disk of FixPak in drive A.
   7. Copy a:\os2dump
   8. Enter OS/2 command "attrib +r +s +h os2dump" to hide OS2DUMP.
   9. Reboot system.



   3.0.7 TRAP IN ES16881$ AFTER FP10 APPLIED

   We do not ship any of the ESS sound card drivers in this Fixpak.  To
   corrrect the problem, get the latest ESS device driver for your card from
   the OS/2 Device Driver Pak online at

   http://service.software.ibm.com/os2ddpak/html/multimed/esstechn



   
                                                       Installation Notes  4


                   October 28, 1999 - Warp 4 FixPak XRIM012

   Do this before you install the FixPak.


   3.0.8 SYSTEM SOUNDS NOT WORKING AFTER FIXPAK APPLIED

   If, after applying a FixPak, your System Sounds no longer work or you get
   an error message stating "Error in closing CD device:  Invalid device ID
   given" when you close the CD Player, it may be caused by the FixPak
   replacing the following files in your MMOS2 directory tree:

      \MMOS2\DLL\DIVE.DLL
      \MMOS2\DLL\MMPM.DLL
      \MMOS2\DLL\MPGIO.DLL
      \MMOS2\SSMDD.SYS
      \MMOS2\DLL\SVMC.DLL
      \MMOS2\DLL\SVSH.DLL


   To recover, restore these files from your FixPak Backup or Archive
   directory.

   1. Boot from another partition, your Installation or Utility disks.
   2. Rename the existing files in the MMOS2 directory tree so they will not
      be overlayed when you restore the older files.
   3. Change to the FixPak Backup directory if there is one. If not then
      change to the FixPak Archive directory.

      Note: The names may not be Backup or Archive. They will be whatever
      you called them when you applied a FixPak.
   4. For each of the above files, enter

      UNPACK source target

      Where "source" is the filename.ext of the file in the Backup or Archive
                     directory, like DIVE.DL_ or SSMDD.SY_
            "target" is the fully qualified path of where to place the file,
                     like C:\MMOS2\DLL or C:\MMOS2


   5. Repeat for each of the above files
   6. Reboot your system. This resolved the problem on a TP760 and may also
      resolve the problem on other hardware.



   3.0.9 USING DISPLAY RECOVERY CHOICES

   If you have the "Display Recovery Choices at each system startup"
   function active on your system, you need to disable it before you apply a
   FixPak if


   
                                                       Installation Notes  5


                   October 28, 1999 - Warp 4 FixPak XRIM012

   þ  The system is running
   þ  The boot partition will be serviced.

   The problem with using this function is that the Corrective Service
   Facility (CSF) updates the current CONFIG.SYS with entries to run the
   Locked File Device Driver (LFDD) the next time you boot the system. This
   is done to replace files that are currently in use (locked) by the
   system.

   The Recovery choices function replaces the current CONFIG.SYS with the
   one that is associated with the recovery choice you select, wiping out
   the LFDD entries. This means the LFDD does not run at boot time and the
   deferred files will not get updated, therefore the FixPak does not get
   completely applied.

   Note: It is not necessary to disable this function if you install a
   FixPak by booting from the CSF disks or from another OS/2 partition.


   3.0.10 INSTALLATION OF JAVA 1.1.4

   Installation of Java 1.1.4 on top of this FixPak will down-level portions
   of the ULS support. If this occurs, Euro currency support will not work
   correctly.  To recover, re-install this FixPak. This will allow both Java
   1.1.4 and Euro support to work correctly.


   3.0.11 DSPRES.DLL INCLUDED IN THIS FIXPAK

   DSPRES.DLL has been added to this FixPak for support for Euro character
   display. This file can sometimes be overwritten by video device driver
   installation. If this occurs, an updated version is located in
   \OS2\INSTALL\VGA. This updated file can be copied into the \OS2\DLL
   directory.


   3.0.12 NO PRODUCTS WERE FOUND

   If you see a "No products were found" message while applying this FixPak,
   there is probably a mismatch between the data in
   \OS2\INSTALL\SYSLEVEL.OS2 and what is supported by this FixPak.

   Compare the data for the OS/2 Base Operating System from the SYSLEVEL
   command output with the same values listed at the end of this document in
   the "FixPak Corrective Service levels and disk layouts" section. They
   must be identical.

   If these values are correct, check for the following files on any OS/2
   boot drive in the \OS2\INSTALL directory.



   
                                                       Installation Notes  6


                   October 28, 1999 - Warp 4 FixPak XRIM012

      LOGF0000.OS2
      LOGSTART.OS2
      LOGARCH.OS2


   Check for the following files in your MMOS2\INSTALL directory.

      LOGF0000.MPM
      LOGSTART.MPM
      LOGARCH.MPM


   Also check for the following file:

      C:\CSF_SEL.000


   If these files exist, rename them and try the FixPak installation again.
   Delete the renamed files after the FixPak has been applied.


   3.0.13 PREVIOUS INSTALLATION INTERRUPTED

   If you get a message that the previous installation of a FixPak was
   interrupted (whether true or not), check for the following files and
   directory on all drives:

     Files:
        FIXSTART
        IBMCSFLK.LST
        IBMCSFLK.CSF
        CSF_*

     Directory:
        IBMCSFLK


   If any exist, rename them and try the FixPak installation again.  Delete
   the renamed files after the FixPak has been applied.


   3.0.14 UNABLE TO OPEN ARCHIVE DIRECTORY

   If you get a message about problems with the Archive directory (for
   example, cannot find or unable to open), then the most probable cause is
   that you applied a previous FixPak and have since deleted the FixPak
   ARCHIVE or BACKUP directory.

   To recover from this, follow the "No files to service" and "Previous
   installation interrupted" steps listed above.


   
                                                       Installation Notes  7


                   October 28, 1999 - Warp 4 FixPak XRIM012

   3.0.15 RC 932 DOING CID INSTALL OF WARP 4

   If you get a RC (Return Code) 932 while doing a CID install of Warp 4 and
   you are using RSPINST.EXE from FixPak 3 or later, you will need to do the
   following.

   1. Create a temporary work directory somewhere on your harddrive.

         assume it's c:\tempwork


   2. Locate the section called "FixPak Corrective Service levels and disk
      layouts".
   3. Locate CHKDSK.SYS, CHKDSK32.DLL, CHKDSK32.EXE  and UHPFS.DLL and
      record what disks they are found on.

      Note: For FixPak 3, they are on disks 12, 8, 12 and 9 respectively.
      This will change for later FixPaks.

   4. Place FixPak disk 12 in A: and enter

         unpack a:\fix\os2.1\chkdsk.sy_ c:\tempwork


   5. Place FixPak disk  8 in A: and enter

         unpack a:\fix\os2.1\chkdsk32.dl_ c:\tempwork


   6. Place FixPak disk 12 in A: and enter

         unpack a:\fix\os2.1\chkdsk32.ex_ c:\tempwork


   7. Place FixPak disk  9 in A: and enter

         unpack a:\fix\os2.1\uhpfs.dl_ c:\tempwork


   8. Make backup copies of CHKDSK.SYS, CHKDSK32.DLL and UHPFS.DLL from the
      DISK_3 directory of your CID tree.
   9. Copy CHKDSK.SYS from c:\tempwork to the DISK_3 directory of your CID
      tree
   10.Copy CHKDSK32.DLL from c:\tempwork to the DISK_3 directory of your CID
      tree
   11.Copy UHPFS.DLL from c:\tempwork to the DISK_3 directory of your CID
      tree
   12.Make a backup copy of the BUNDLE file on DISK_0
   13.Copy DISK_0\BUNDLE c:\tempwork
   14.Copy PACK2.EXE to c:\tempwork. If you don't have this file you can get
      it using your Web browser from

   
                                                       Installation Notes  8


                   October 28, 1999 - Warp 4 FixPak XRIM012

         ftp://ps.software.ibm.com/ps/products/os2/fixes/v4warp


   15.PACK2 CHKDSK32.EXE bundle /H:\OS2\CHKDSK32.EXE /A

      Note: This adds CHKDSK32.EXE to the bundle file.  Enter "unpack bundle
      /show" to verify it's really there.

   16.Copy the updated BUNDLE back to the DISK_0 directory
   17.Delete the c:\tempwork directory and files.
   18.Copy the files SCSIADDS and PRESCHEK from DISK_4 to DISK_5.
   19.Do the CID install




   3.0.16 MULTIMEDIA NO LONGER SELECTABLE

   IBM Multimedia Presentation Manager/2 (MPM) is now fully integrated into
   the base OS/2. As part of this change, the \MMOS2\INSTALL\SYSLEVEL.MPM
   file has been deleted. This means you will no longer see it as a
   selectable entry in the Serviceable Products window when using the
   A:SERVICE method of installation.


   3.0.17 MMPARTS.DLL/USER.EXE POPUP DURING INSTALL

   If you get a popup about MMPARTS.DLL or USER.EXE during install, reply
   "Yes" to replace it.


   3.0.18 CSF0208 NO PRODUCTS WERE FOUND ON THE TARGET ...

   This means no SYSLEVEL files was found that had a CSD Level, COMPID,
   Version and Type that matched any of the SYSLEVEL files supported by this
   FixPak. Run the SYSLEVEL command and record the output for SYSLEVEL.OS2
   in the OS2/INSTALL directory on your boot drive. Compare this data with
   the data contained in the README.1ST file on FixPak disk 1.

   To recover from this, rename the existing SYSLEVEL.OS2 file to SYSL.OS2
   and copy SYSLEVEL.OS2 from your Warp 4 installation DISK 1.


   3.0.19 CSF0248 ARCHIVE PATH IS SHARED BETWEEN MISMATCHED

   1. The Archive path you specified (or was previously specified) contains
      files from a different release of OS/2. You need to specify a
      different Archive path.
   2. You have a bad SYSLEVEL.OS2 or SYSLEVEL.MPM file. Both must have the
      same Current CSD Level, Version, Type and Component ID if you point
      both Fixpak Archives to the same location.

   
                                                       Installation Notes  9


                   October 28, 1999 - Warp 4 FixPak XRIM012

      Check \OS2\INSTALL\SYSLEVEL.OS2 and \MMOS2\INSTALL\SYSLEVEL.MPM. If
      either is wrong, place the last FixPak disk in A: and run FIXSYSL.CMD
      to correct SYSLEVEL.OS2 problems or SYSZMPM.CMD to fix SYSLEVEL.MPM
      problems.



   3.0.20 CSF0249 ERROR OPENING OR CREATING ARCHIVE FILE.

   Typically this means the FixPak Archive directory has been deleted but
   the files that point to it still exist. You need to delete the
   LOGF000.OS2 and LOGSTART.OS2 files from your OS2/INSTALL directory.
   LOGSTART.OS2 has the R/O attribute set and it needs to be reset before
   the file can be deleted.  There may also be a LOGARCH.OS2 file that needs
   to be deleted.

   This can also occur for Multi Media Presentation Manager/2 (MMPM). You
   would then need to delete the LOGF0000.MPM and LOGSTART.MPM files from
   the \MMOS2\INSTALL directory and possibly LOGARCH.MPM if it exists.


   3.0.21 PRINTER INSTALLATION PROCESS CHANGE

   If you install a new printer by clicking MB2 on the Printer icon in the
   templates folder then clicking on Install, the printer object will now be
   created in the Printer folder, not on the Desktop.


   3.0.22 CONFIGURATION INSTALLATION DISTRIBUTION ( CID )

   Read the README.CID on Disk # 1 for an example of how to set up a
   response file to do a CID install.




















   
                                                      Installation Notes  10


                   October 28, 1999 - Warp 4 FixPak XRIM012

   4.0 POST INSTALLATION NOTES



   4.0.1 NEW MESSAGE BOX IN FIX FOR APAR JR12954

   With FixPak 10 installed, if you tried to create Utility Disks and
   selected "Use files from hard disk if they exist" you would get a SYS3175
   trap. This was caused by a much larger AIC7870.ADD file causing the
   diskette to fill up before all files were copied to it.

   With FixPak 11 you will now get a "Diskette Full" message box that says
   "Remove unwanted files and press OK.".

   This means you should delete from the diskette in your A: drive, files
   that are not needed on your system.  Good candidates for deletion are the
   CD-ROM drivers and harddisk drivers you do not need. You can check
   CONFIG.SYS in the root of your boot drive to see if a file is used. If
   not it can be deleted.

   When you delete a file, also delete or REM out that line in CONFIG.SYS on
   the diskette in A:.


   4.0.2 RAS FILE CHANGES

   Beginning with FixPak 11, the following files are being added to the
   \OS2\SYSTEM directory. If they also exist in the \OS2 directory you can
   delete them as they are no longer needed there.

   þ  DTRACE.EXE
   þ  TRACEFMT.EXE
   þ  TRSPOOL.EXE

   If you do not delete them from the \OS2 directory, they will be serviced
   the same as the ones in the \OS2\SYSTEM directory to keep them current.

   Also, the following files in the \OS2\SYSTEM\RAS directory can be deleted
   as they have been superseded as shown:

   File           Superseded by
   MDTRACE.doc    DTRACE.DOC
   MTRSPOOL.DOC   TRSPOOL.DOC









   
                                                 Post Installation Notes  11


                   October 28, 1999 - Warp 4 FixPak XRIM012

   4.0.3 SETTING IRQ9 PROCESSING IN CONFIG.SYS FOR VPIC.SYS

   Some applications like PCAS (and some terminal emulators) have problems
   sharing IRQ9 in a VDM.  Since the DOS Virtual Device drivers are not
   loaded out of CONFIG.SYS, a new device driver VPICPARM.SYS has been added
   starting with Warp 3 FixPak 38 and Warp 4 FixPak 8.

   To prevent sharing of IRQ9 in a VDM, add the following statement in
   config.sys:

      device=x:\os2\mdos\vpicparm.sys irq9_off
      (x: is your OS/2 boot drive)


   Next, in the settings for the program that requires exclusive access to
   IRQ9, set the DOS setting HW_SHARE_IRQ9 to ON.

   When you next boot your system, VDMs will not share IRQ9.


   4.0.4 WINDOWS PRINTER DRIVERS LEAVE A ZOMBIE THREAD RUNNING

   A problem occurs with some Windows printer drivers where a zombie thread
   is left running after the program that loaded it is exited.

   This does not occur when the program is run from a Seamless instance of
   PROGMAN or from a Full Screen session because when these are exited the
   whole WINOS2 Subsystem is exited.

   This problem has been reported for the Adobe and Hewlett Packard Windows
   printer drivers. To correct this problem for people running with these
   drivers ONLY who have experienced symptoms such as:

   þ  exiting a program running seamlessly after printing or
   þ  setting up a printer and seeing the icon not being unhatched and/or
   þ  not being able to start another copy of the program

   Add the following line in OS2\MDOS\WINOS2\SYSTEM.INI in the *boot*
   section:

   þ  backgroundtasks=run_enum.exe,hpfbkg02.exe

   then restart WINOS2.

   Note: There may be other drivers that have the same problem.  If you
   experiences a similar problem with other drivers, please report it so the
   correct SYSTEM.INI entry can be determined.





   
                                                 Post Installation Notes  12


                   October 28, 1999 - Warp 4 FixPak XRIM012

   4.0.5 APAR JR09494 (TRAP EXITING WINOS2 WITH MWAVE AUDIO)

   The fix for APAR JR09434 (trap exiting winos2 with MWAVE audio) requires
   a new MWAVEVDD.SYS dated 11/96 or later.  This file is available from the
   IBM PC Company web site at http://www.pc.ibm.com.


   4.0.6 SYS3170 INSTALLING LOTUS SMARTSUITE 96

   A problem was discovered when attempting to install Lotus SmartSuite 96
   with a early version of the Matrox video driver.  A SYS3170 occurs after
   pressing the button to start copying the files to the hard disk.

   The problem does not occur with the current Matrox driver available on
   the Web at

      http://www.matrox.com/mgaweb/drivers/ftp_os2.htm


   A work around that does not involve downloading files from the web, is to
   switch your display driver to VGA during the install and after it has
   completed, restore the Matrox driver.


   4.0.7 INTERMITTENT HANGS

   If you experience intermittent hangs of your system, check your LIBPATH
   statement in CONFIG.SYS to see if SOM.DLL is in a directory other than,
   and ahead of, OS2\DLL.

   If yes, either change the LIBPATH statement to move the directory after
   OS2\DLL or try renaming SOM.DLL to SOM.DLO.

   One known cause of this is VisualAge C++. It has a version of SOM.DLL in
   its DLL library and the installation puts this library ahead of OS2\DLL
   in the LIBPATH statement.
















   
                                                 Post Installation Notes  13


                   October 28, 1999 - Warp 4 FixPak XRIM012

   5.0 NEW FUNCTION

   It is our policy not to include new function in FixPaks. However, as with
   any policy there may be exceptions. If any exception occurs in the
   future, we will communicate them to you in this section of the
   README.1ST.


   5.1 SERVICEABILITY (RAS) ENHANCEMENTS

   With FixPak 35 for Warp 3.0 and FixPak 10 for Warp 4.0 major enhancements
   were provided to the system diagnostic tools (RAS Enhancements).  They
   provide major functional enhancements to the System Trace and Process
   Dump facilities.  Full details of these enhancements can be found in the
   README.DBG file that will be found in the \OS2\INSTALL directory after
   this FixPak is installed.

   Other associated documentation may be found in:

   þ  OS2\SYSTEM\RAS\TRACE.DOC
   þ  OS2\SYSTEM\RAS\DTRACE.DOC
   þ  OS2\SYSTEM\RAS\PROCDUMP.DOC
   þ  OS2\SYSTEM\RAS\TRSPOOL.DOC

   Always refer to README.DBG for details of any RAS enhancements delivered
   with a FixPak.


   5.2 QUERYING FILE DATES FOR FILES AFTER DEC 31, 1999 IN REXX

   Existing REXX functions return file dates with a two digit year only.
   While these functions are Year 2000 tolerant (i.e. the results will be
   correct for files dated after Dec 31, 1999) they require some additional
   logic in existing programs to handle the returned date correctly when
   they are compared with other file dates.

   Since the output format of the existing functions could not be changed
   for compatibility reasons, new options have been added to the REXX
   interpreter to return file dates with the year formatted with 4 digits.
   Two functions have been extended to support the new format. The syntax to
   retrieve the file date in 4 digit format is as follows:











   
                                                            New Function  14


                   October 28, 1999 - Warp 4 FixPak XRIM012

      /********************************************/
      /* Use STREAM QUERY TIMESTAMP to query file */
      /* date in 4 digit format                   */
      /********************************************/
      Say Stream("C:\CONFIG.SYS", "C", "QUERY TIMESTAMP")

      /***********************************************/
      /* Use option "L" with SysFileTree to return a */
      /* list of files with long date format         */
      /***********************************************/
      Call RxFuncAdd "SysLoadFuncs", "RexxUtil", "SysLoadFuncs"
      Call SysLoadFuncs
      Call SysFileTree "C:\*.*", "Files", "L"
      Do i = 1 To Files.0
         Say Files.i
      End


   These extensions are available in both classic REXX and Object REXX on
   OS/2 Warp 3 and Warp 4 since fix pack versions 35 and 6. If you use these
   extensions in your program you have to make sure that you are running the
   right level of REXX


   5.3 ENHANCED SUPPORT FOR WORKSPACE ON-DEMAND



   5.3.1 PMLOGON USER EXITS

   This function, provided by PMLOGON, allows system integrators to have
   REXX code executed at specific points during the startup and logon
   sequence.  By default, user exits are disabled in PMLOGON.EXE.  To enable
   user exits, an execution parameter (/URX) in the RUNWORKPLACE line of the
   CONFIG.SYS file must be added.  The /URX parameter specifies the location
   and name of the user exit command file:

      Execution Parameter            User Exit command file that will be
                                                  executed
      -------------------            -----------------------------------

      /URX                           \OS2\PMLOGURX.CMD

      /URX:<filename>.CMD            <filename>.CMD located in one of the
                                     locations specified by the PATH
                                     environment variable

      /URX:d:\<path>\<filename>.CMD  d:\<path>\<filename>.CMD




   
                                                            New Function  15


                   October 28, 1999 - Warp 4 FixPak XRIM012

   The same command file is called for ALL user exits.  The FIRST parameter
   supplied to the command file indicates the exit that it is being called
   for. The REXX command file is called for all these exits, even if it does
   not need to process all of the exits.  The REXX command file must be able
   to return error free if it receives an exit number that it does not need
   to handle.  The following user exits are available:














































   
                                                            New Function  16


                   October 28, 1999 - Warp 4 FixPak XRIM012

       First Parameter    Exit Description
       ---------------    ----------------

       0                  Executes ONCE per boot, before the requester
                          is started.  There is no user logged on at this
                          time.  This exit may return a string that is
                          processed exactly as the following execution
                          parameters set in RUNWORKPLACE of CONFIG.SYS:

                          /U: /UF: /P: /PF: /D: /DF: /PW  /AUTO  /NONFLE

                          It is processed immediately after the execution
                          parameters.  See Note 2 below on /AUTO processing.

       1                  Executes ONCE per logon, after the requester
                          is started, but before logon occurs.  There is no
                          user logged on at this time.  This exit may return
                          a string that is processed exactly as the
                          following execution parameters set in RUNWORKPLACE
                          of CONFIG.SYS:

                          /U: /UF: /P: /PF: /D: /DF: /PW  /AUTO  /NONFLE

                          It is processed immediately before logon.  See
                          Note 2 below on /AUTO processing.

       2                  Executes ONCE per logon, after the requester is
                          started and after logon occurs.  There is a user
                          logged on at this time, but the Desktop has not
                          been started and the objects are not displayed.
                          No returns are processed.

       3                  Executes ONCE per logon, after the Desktop has
                          been started and the objects are created but not
                          currently displayed, but immediately before
                          control is passed to the Desktop.  The icons are
                          fixed at this point.  There is a user logged on
                          at this time.  No returns are processed.

        4                 Executes immediately after a failed logon.  The
                          second parameter passed to the exit contains the
                          return code from the logon API.  This exit may
                          return a string that is processed exactly as the
                          execution parameters set in RUNWORKPLACE of
                          CONFIG.SYS for the following parameters only:

                          /U: /UF: /P: /PF: /D: /DF:  /PW  /AUTO  /NONFLE

                          This exit is processed immediately and logon is
                          retried with the new parameters regardless of
                          the /AUTO switch.  See Note 2 below on /AUTO

   
                                                            New Function  17


                   October 28, 1999 - Warp 4 FixPak XRIM012

                          processing.  If no string is returned, then the
                          normal logon failure or password expired message
                          box is displayed.

      Note 1:  The session environment for the REXX command file is that
               of PMLOGON.EXE and, therefore, does not contain any input or
               output facility. For example, "PULL" from the keyboard and
               "SAY" to the console do not work.

      Note 2:  The /AUTO parameter is validated at every step (for example,
               after command line processing, after exit 0 returns, and
               after exit 1 returns).  It is turned off if insufficient
               information (such as no user ID) is provided at that stage
               for an automatic logon.  If the user ID is supplied by the
               exit, that exit must also provide the /AUTO parameter in
               order for an auto logon to work.




   5.3.2 SETUP STRINGS FOR PUBLIC APPLICATIONS

   The NCAPPUTL.EXE utility of WorkSpace On-Demand allows for specific
   Workplace Shell WPProgram setup strings that are provided when creating
   public applications on the WorkSpace On-Demand Desktop.  In particular,
   the ICONPOS setup string can be defined for a public application so that
   the Administrator can identify where application icons are placed on the
   WorkSpace On-Demand Desktop.

   When a WorkSpace On-Demand Administrator creates a public application, a
   new environment variable must be added to the application to provide a
   setup string.  The parameter name is NCC_SETUP_POST and the parameter
   value can consist of any of the setup strings specified below.  Each
   setup string consists of a KEYNAME, followed immediately by an equal
   ('=') sign and a VALUE.  Multiple setup strings can be passed in the
   NCC_SETUP_POST environment variable by separating each setup string with
   a semicolon (';').  The creation of this parameter can be performed
   either using the WorkSpace On-Demand Public Applications Notebook (on the
   Parameters page) or using a Command Line Interface (CLI).  The following
   is an example of one parameter:

       NCC_SETUP_POST=ICONPOS=10,10;


   The NCC_SETUP_POST environment variable will be searched for when each
   WorkSpace On-Demand public application is created.  If it is found, its
   value will be used when creating the public application on the WorkSpace
   On-Demand Desktop.

   The following KEYNAME values are permitted for setup strings:


   
                                                            New Function  18


                   October 28, 1999 - Warp 4 FixPak XRIM012

       Keyname        Value            Description
       -------        -----            -----------

       CCVIEW         DEFAULT          Specifies the default value for
                                       concurrent views
                      YES              Creates new views
                      NO               Displays the open view

       ICONFILE       filename         Sets the object's icon.

       ICONPOS        x,y              Sets the initial icon position in
                                       a folder.  The "x" and "y" values
                                       represent the position in the object's
                                       folder in percentage coordinates.

       ICONRESOURCE   id,module        Sets the object's icon.  The "id"
                                       is the icon resource ID in the dynamic
                                       link library (DLL) "module."


   Refer to the Workplace Shell Programming Reference for a description and
   definition of the above setup strings.

   Note: The NCC_SETUP_POST environment variable exists in the current
   environment when the public application with which it is associated is
   running.


   5.3.3 COMMAND LINE OPTIONS FOR TLOGOFF AND TSHUTDWN

   Three command line options have been added to both TLOGOFF.EXE and
   TSHUTDWN.EXE:

    1.  /Q -- causes these programs not to display the UPM/LAN
              copyright window.
    2.  /N -- causes no confirmation message boxes to be displayed.


   Note: If these parameters are not capitalized, they are ignored.


   5.3.4 PMLOGON NO PROGRESS INDICATOR OPTION

   An execution parameter has been added to PMLOGON that causes the progress
   indicator window not to be displayed during all of logon processing. That
   parameter is /NOPI and can be specified only from the RUNWORKPLACE line
   in CONFIG.SYS. If /NOPI is returned as a parameter from a user REXX exit,
   it is ignored.




   
                                                            New Function  19


                   October 28, 1999 - Warp 4 FixPak XRIM012

   5.3.5 PMLOGON NO SYSTEM MODAL WINDOW OPTION

   An execution parameter has been added to PMLOGON which prevents PMLOGON
   from setting any of its windows to be system modal after user exit 1 is
   executed on the first boot or anytime after a logoff.  The parameter is
   /NOSM1 and can only be specified from the RUNWORKPLACE line in
   CONFIG.SYS.  If /NOSM1 is returned as a parameter from a user REXX exit,
   it is ignored.


   5.4 EURO SUPPORT

   The European Monetary Union is creating the Euro as a new common currency
   for Europe.  As part of this effort the European Commission has
   introduced a new character which represents the Euro.  This character
   looks like an uppercase C with two horizontal lines through it.  The Euro
   will come into existence on January 1, 1999 for use in banking.  Euro
   notes and coins will be issued starting January 2002.



   5.4.1 BASE OS/2 SUPPORT

   The OS/2 basic support for Euro consists of adding the Euro character to
   fonts, codepages, and keyboards.  The Euro is added to all display and
   ATM fonts and to the Times New Roman MT 30 TrueType font which is
   available with Java 1.1.  The Euro is added to all western European
   keyboards and the US International keyboard.  The Euro can be used in
   base OS/2, Presentation Manager, and in DOS.  The Euro is not supported
   in WinOS2.

   The Euro character is added to these OS/2 base and PM codepages:

       850    0xD5   PC Latin 1          base + PM
       857    0xD5   PC Turkish          base + PM
       1004   0x80   Windows Extended    base + PM
       1250   0x80   Windows Latin 2     PM
       1251   0x88   Windows Cyrillic    PM
       1252   0x80   Windows Latin 1     PM
       1254   0x80   Windows Turkish     PM
       1257   0x80   Windows Baltic      PM


   The Euro character is added to these fonts.








   
                                                            New Function  20


                   October 28, 1999 - Warp 4 FixPak XRIM012

       Courier                      (bitmap)
       Courier                      (ATM)
       Helv                         (bitmap)
       Helvetica                    (ATM)
       System Monospace             (bitmap)
       System Proportional          (bitmap)
       System VIO                   (bitmap)
       Times New Roman              (ATM)
       Times New Roman MT 30        (TrueType - Java 1.1)
       Tms Rmn                      (bitmap)
       WarpSans                     (bitmap)


   The Euro character is added to these OS/2 keyboards:

       Belgium           be       altgr-e
       Canada            ca       altgr-e
       Canadian French   cf       altgr-e
       Denmark           dk       altgr-5
       Finland           su (fi)  altgr-5
       France            fr       altgr-e
       Germany           gr (de)  altgr-e
       Germany(453)      de453    altgr-e
       Iceland           ic (is)  altgr-5
       Iceland 101       is458    altgr-5
       Italy             it       altgr-5
       Italy extended    it142    altgr-5
       Latin America     la       altgr-e
       Netherlands       nl       altgr-e
       Norway            no       altgr-5
       Portugal          po       altgr-5
       Spain             sp (es)  altgr-5
       Sweden            sv       altgr-5
       Swiss French      sf       altgr-e
       Swiss German      sg (sd)  altgr-e
       Turkey            tr179    altgr-e
       Turkey 440        tr440    altgr-e
       UK                uk       altgr-4
       UK 168            uk168    altgr-e
       US International  ux       altgr-e





   5.4.2 WHERE EURO IS NOT SUPPORTED

   The Euro is not supported in WinOS2.  This character is not supported in
   the Windows-1252 codepage used in WinOS2.  This character is not
   available on the WinOS2 keyboards.  This character is not available in
   the WinOS2 supplied TrueType fonts:

   
                                                            New Function  21


                   October 28, 1999 - Warp 4 FixPak XRIM012

           Arial             (Windows TrueType)
           Courier New       (Windows TrueType)


   The Euro is not in the 437 (US English) or 863 (Canadian French)
   codepages.  You must use codepage 850 to get the Euro.  The Euro is not
   on the US keyboard.  You can use the US International (ux) keyboard
   instead.



   5.4.3 PRINTING THE EURO

   Existing printers do not support the Euro in device fonts.  You need to
   select a font which is not mapped to a device font in order to print the
   Euro.  The Euro will print correctly on printers where the system fonts
   are used.  When there are problems, a dotless-i is normally printed
   instead of the Euro.

   For PostScript printers, it is necessary to disable device fonts to print
   the Euro in one of the base PostScript fonts (Helvetica, Times Roman,
   Courier).  To do this:

   1. Open the properties of the Printer object
   2. Select the Print Driver tab
   3. Select Job Properties
   4. Select the Output tab
   5. Deselect "Use printer device fonts"



   5.5 NEW WARP REGISTRY EDITOR

   See the README.REG file on the first FixPak disk for details.


   5.6 WORKSPACE ON DEMAND

   WorkSpace on Demand Release 1 is supported starting with FixPak 5
   (XR_M005).  WorkSpace on Demand Release 2 is supported starting with
   FixPak 11 (XR_M011).


   5.7 IBM OPEN32

   This FixPak includes updates to the IBM Open32 Application Programming
   Interfaces (APIs).





   
                                                            New Function  22


                   October 28, 1999 - Warp 4 FixPak XRIM012

   5.8 GRAPHICS ADAPTER DEVICE DRIVERS (GRADD)

   Future updates for GRADD and other video drivers (when they are released)
   will be found via the internet at:

   þ  http://service.software.ibm.com/pslaunch.html



   5.9 JOLIET-2 SUPPORT IN CDFS.IFS

   Joliet is a Microsoft extension to the ISO 9660 CD-ROM file system which
   adds Unicode and longname support.  Presently both Windows 95 and Windows
   NT 4.0 support the Joliet-2 and Joilet-3 formats.  Beginning with Warp 3
   Fixpak 32 and Warp 4 Fixpak 4, you can enable the Joliet-2 support by
   adding the '/w' option to the CDFS.IFS statement in CONFIG.SYS.

   Joilet-3 format is not supported.



   5.10 NEW (IMPROVED) CHKDSK

   This version of CHKDSK offers significant improvements for High
   Performance File System (HPFS) drives.  CHKDSK now fixes all errors found
   on HPFS drives in a single pass, operating faster, and with less memory
   than previous versions.  It contains better error detection and
   correction algorithms, and creates a log file so service personnel can
   determine what errors it found and how it corrected them.  Finally, only
   the amount of physical memory in your system limits the size of the
   largest drive CHKDSK can check at boot time (autocheck).

   Improvements in this version of CHKDSK are for HPFS drives only.  No
   changes occurred to checking File Allocation Table (FAT) drives.  This
   enhanced CHKDSK operates on IBM OS/2 Warp 3.0 and higher, including IBM
   Warp 4, IBM Warp Server 4 and IBM Warp Server 4 SMP.  This new CHKDSK
   version will not run on version of OS/2 before OS/2 Warp 3.0.


   5.10.1 USING THE NEW CHKDSK

   The interface to CHKDSK remains CHKDSK.COM and PMCHKDSK.  No changes
   occurred to the CHKDSK command line parameters or messages.

   The first time this version of CHKDSK runs on a fast formatted drive, it
   will report harmless errors.  These errors go away once CHKDSK is run
   with the /F option.

   Note: OS/2 Warp Install uses fast format.



   
                                                            New Function  23


                   October 28, 1999 - Warp 4 FixPak XRIM012

   Unlike prior versions of CHKDSK, large drives ( > 8GB) may be autochecked
   if sufficient memory is available.  The amount of memory required can
   vary between 16MB and 48MB depending on the size of the drive.  To enable
   the autochecking of large drives, the following line must be added to
   your config.sys:

     BASEDEV=CHKDSK.SYS


   This device driver allows CHKDSK to access memory normally reserved for
   the system during the boot process.  Due to this, if CHKDSK has to use
   this memory:

   þ  The memory will not be available for the system to use in completing
      the boot process
   þ  Errors may occur later in the boot process.

   Hence, the chkdsk.sys device driver is smart enough to recognize when
   CHKDSK has used this reserved memory and will reboot the system
   automatically after all HPFS drives have been checked.  Since the drives
   were checked before the reboot, CHKDSK will not have to check them after
   the reboot and the system will boot normally.

   Note: For those wishing to run unattended:  In order to prevent the
   system from pausing between autocheck and the reboot, we recommend that
   the statement PAUSEONERROR=NO be in the CONFIG.SYS.

   When you don't have enough physical (real) memory to autocheck large
   drives, you must use virtual memory from SWAPPER.DAT.  The technique is
   to check the large drives between the time OS/2 starts and PM begins.  To
   start OS/2, the swap file and device drivers must reside on an unaffected
   drive.  The drives to be checked must not appear in the autocheck list in
   the IFS statement for HPFS (or HPFS386).

   This technique involves the following steps:

   1. Remove the drive letter of the affected drive(s) from the autocheck
      list in the IFS statement for HPFS (or HPFS386).
   2. If you are using HPFS, add /QUIET to the IFS statement for HPFS.
   3. If you are using HPFS386.IFS, add POPUPERRORS=NO below the
      [filesystem] section of the HPFS386.INI file. Support for the
      POPUPERRORS parameter requires OS/2 LAN Server FixPak IP08265 or
      higher for LS 5.0 or FixPak IP08503 or higher for LS 5.1. In addition,
      the POPUPERRORS parameter ONLY suppresses HFS0102 messages.
   4. Add a CALL statement to your config.sys.  This CALL statement will
      call CHKDSK.COM, and will tell it what drive to check. This CALL
      statement must appear after the LIBPATH=, SET PATH=, and SET DPATH=
      statements, but before any other CALL statements in your CONFIG.SYS
      file.



   
                                                            New Function  24


                   October 28, 1999 - Warp 4 FixPak XRIM012

   Calls to CHKDSK in STARTUP.CMD are not necessary, when using this method
   or the base device driver (chkdsk.sys) method.

   Example: The computer boots from drive C (moderate HPFS or FAT sized
   drive).  Drive D (large HPFS) requires more RAM to check than installed
   in the machine.

     Original IFS statement:

          IFS=C:\OS2\HPFS.IFS /CACHE:2048 /CRECL:32 /AUTOCHECK:CD

     New IFS statement:

          IFS=C:\OS2\HPFS.IFS /CACHE:2048 /CRECL:32 /AUTOCHECK:C /QUIET

     The CALL statement to use is:

          CALL=C:\OS2\CHKDSK.COM D: /C


   The /C option tells CHKDSK to check the drive only if it is "dirty" and
   it needs checking.

   If you need to boot from diskettes to check an HPFS drive, you must have
   the following files on the diskette you wish to run CHKDSK from:

     CHKDSK.COM
     CHKDSK32.DLL
     UHPFS.DLL


   The BOOTDISK.EXE program has been updated to create new utility diskettes
   with the proper files.


   5.10.2 CHKDSK LOG FORMATTER

   CHKDSK creates a binary service log file (chkdsk.log) on the root of the
   drive being checked during autocheck or whenever the /F option is
   invoked.  The previous log file is saved as chkdsk.old. A formatter for
   this log file can be found at:

   ftp://service.boulder.ibm.com/ps/products/os2/fixes/chklogpk.exe


   This is a self extracting ZIP file. Place it in a directory in your path
   and enter CHKLOGPK. This will create the following files:





   
                                                            New Function  25


                   October 28, 1999 - Warp 4 FixPak XRIM012

     message.txt
     msghdr.txt
     pmchklog.exe
     range.txt
     readme


   They should all have a date of 05/14/97 or later (May 14, 1997).

   This is a tool used by OS/2 service to format and view the new CHKDSK log
   entries.  There is no support for this tool. You are welcome to use it
   but if you have problems with it or do not understand the output DO NOT
   contact IBM for assistance as none will be provided.


   5.11 AUTOMATED TRAP SCREEN LOGGING

   Whenever an application program traps, the trap information is (now)
   automatically logged in the POPUPLOG.OS2 file. This is a cumulative file
   that is by default located in the root directory of the bootable
   partition.  Should this file become too large then it may be erased or
   pruned (reduced in size). The system will automatically re-create it if
   it does not exist.

   The TRAPLOG command and SUPPRESSPOPUPS CONFIG.SYS statement may be used
   to control trap screen behavior (see below).


   5.11.1 SUPPRESSPOPUPS

   SUPPRESSPOPUPS=0 will restore behavior to pre-FixPak 29 behavior.  That
   is, to disable logging and to have trap screens displayed unless
   specifically overridden by an application's use of the DosError API.

   SUPPRESSPOPUPS=x: will disable trap screen display for all processes and
   will log trap screens in x:\POPUPLOG.OS2, where x: is a drive or
   partition.

   If SUPPRESSPOPUPS is omitted then the behavior is as described above
   under "Automated Trap Screen Logging".


   5.11.2 TRAPLOG

   The TRAPLOG command allows dynamic control of trap information logging.

   The command syntax is:

          TRAPLOG [x: | NOLOG] [POPUPS | NOPOPUPS]



   
                                                            New Function  26


                   October 28, 1999 - Warp 4 FixPak XRIM012

   where:

   þ  x: specifies that trap information is to be logged in
       x:\POPUPLOG.OS2, x: being any partition drive letter.
   þ  NOLOG disables logging of trap information.
   þ  POPUPS enables the trap information pop-up message (SYS3175).
   þ  NOPOPUPS disables the trap information pop-up message.



   5.11.3 TRAPDUMP

   The TRAPDUMP command allows the conditions under which a trap will
   initiate a System Dump to be set dynamically. Prior to Warp 3.0 FixPak
   29, the System Dump setting could only be manipulated from CONFIG.SYS by
   use of the TRAPDUMP statement.

   Use of this command should be made under the direction of service
   personnel.

   Warning: The initiation of a System Dump causes an immediate termination
   of the system without any shutdown. No file system shutdown is performed.
   The system behaves as if a fatal crash has occurred, thus under rare
   circumstances data can be lost.

   The command syntax is:

          TRAPDUMP [[ON] | [OFF] | [R0]] [x:] [/NOCHECK]


   where:

   þ  ON enables all application and system traps to initiate a System Dump.
   þ  OFF disables automatic dump initiation.
   þ  R0 enables only Ring 0 traps to initiate a System Dump.
   þ  x: specifies the Dump Partition.
   þ  NOCHECK overrides the system level check for WARP 4.0, since use of
      this command on a system level prior to FixPak 29 is equivalent to the
      SYSDUMP command.



   5.11.4 SYSDUMP

   The SYSDUMP command forces a System Dump to be initiated, regardless of
   the TRAPDUMP settings. This command is provided for the use of service
   personnel to allow Dump Initiation to be automated through use of a
   command file.

   Warning: The initiation of a System Dump causes an immediate termination
   of the system without any shutdown. No file system shutdown is performed.

   
                                                            New Function  27


                   October 28, 1999 - Warp 4 FixPak XRIM012

   The system behaves as if a fatal crash has occurred thus under rare
   circumstances data can be lost.

   The command syntax is:

          SYSDUMP [/NOPROMPT]


   where:

   þ  NOPROMPT allows the Dump to proceed without the prompt and response to
      message:

          "Do you want to force a system dump? (Y/N)"




   5.12 OTHER README FILES

   There are other README files containing information you may want to
   review.  All except README.DBG are found on the first FixPak disk and are
   not copied to your system when the Fixpak is installed. README.DBG will
   be copied to the \OS2\INSTALL directory during installation beginning
   with Fixpak 10 and Fixpak 41.

   File           Use

   README2        Problems fixed in each FixPak (APAR list)

   README.CID     Installing FixPaks via CID

   README.REG     Use of the Warp Registry Editor REGEDIT2.EXE

   README.DBG     Tips on debugging OS/2 Warp and details on the latest
                  Serviceability (RAS) Enhancements (3.0 and 4.0).
















   
                                                            New Function  28


                   October 28, 1999 - Warp 4 FixPak XRIM012

   6.0 CORRECTIVE SERVICE FACILITY



   6.0.1 REQUIRED CSF LEVEL

   You should use release level f.141 or later of the OS/2 Corrective
   Service Facility to install this FixPak.

   Bootable diskettes are no longer provided starting with the F.138B CSF
   build. Instead, you now get a self-extracting ZIP file which contains the
   following:

      archctl.cmd
      build.lvl
      csfpans.dll
      filefix.dll
      fpinst.cmd
      fservice.exe
      fservice.msg
      ibmcsflk.dll
      ibmcsflk.exe
      ibmcsflk.msg
      ibmcsflk.sys
      msg.dll
      nls.dll
      pack.exe
      read.me
      readme.inf
      response.lan
      response.wp3
      response.wp4
      service.exe
      service.hlp
      shpiinst.dll
      unpack.exe
      unpack2.exe
      viocalls.dll


   Follow the directions in the READ.ME file to use the new CSF code. It
   covers the use of SERVICE.EXE and FSERVICE.EXE from a booted partition or
   from one of several alternative boot methods.


   6.0.2 WHERE YOU CAN FIND CSF CODE

   The Corrective Service Facility code is available from many places,
   including, but not limited to, the following:

   Source         How to access

   
                                             Corrective Service Facility  29


                   October 28, 1999 - Warp 4 FixPak XRIM012


   Internet(FTP)  Anonymous FTP to ftp.software.ibm.com in the
                  "/ps/products/os2/fixtool" directory.

   Internet(WWW)  Point your Web Browser at
                  ftp://service.boulder.ibm.com/ps/products/os2/fixtool

   Intranet(FTP)  Anonymous FTP to os2service.austin.ibm.com in the
                  "f:\fixpacks\fixtool" directory.



   6.0.3 CREATING FIXPAK DISKETTES

   Use LOADDSKF.EXE to create the diskettes. For each disk image, place a
   2MB HD (1.44MB formatted) diskette in A:.

   Warning: DO NOT use a 1MB (720KB formatted) diskette because you might
   have problems trying to install this FixPak.

   For each diskette image in the FixPak, do the following:

   Enter LOADDSKF XRIM012.?DK A: /F  (? can be 1 through 9, A through Z).

   Label the diskette as

         FixPak XRIM012
   Corrective Service Diskette ?
          (CSF DISK ?)


   Note: For diskette images ADK through ZDK, use the numbers 10 through 35.

        Examples:

        XRIM012.ADK = 10
        XRIM012.FDK = 15
        XRIM012.LDK = 21
      etc.




   6.1 RESIDUAL FIXPAK FILES FROM OS/2 2.11 OR WARP 3

   If the following is true:

   1. You upgraded your system from OS/2 2.11 or Warp 3
   2. You applied one or more FixPaks to the previous system
   3. You HAVE NOT applied a Warp 4 FixPak


   
                                             Corrective Service Facility  30


                   October 28, 1999 - Warp 4 FixPak XRIM012

   You will have files and directories left on your harddisk that will cause
   problems when installing a Warp 4 FixPak.

   To prevent these problems from occurring, do the following before
   applying your first Warp 4 FixPak.

   On your Warp 4 boot drive:

   þ  Delete \OS2\INSTALL\LOGF0000.OS2
   þ  ATTRIB -R \OS2\INSTALL\LOGSTART.OS2
   þ  Delete \OS2\INSTALL\LOGSTART.OS2

   On the drive where Multimedia Presentation Manager is installed:

   Note: This can be your Warp 4 boot drive or any other drive on your
   system.  Check the "SET MMBASE=" statement in CONFIG.SYS to determine
   which drive this is.

   þ  Delete \MMOS2\INSTALL\LOGF0000.MPM
   þ  ATTRIB -R \MMOS2\INSTALL\LOGSTART.MPM
   þ  Delete \MMOS2\INSTALL\LOGSTART.MPM

   Remove the old Archive and Backup directories and SERVICE.LOG file to
   recover the space they are using.

   You should also remove the FixPak Archive and Backup directories left
   over from your updated OS/2 2.11 or Warp 3 system at this time as well as
   the \OS2\INSTALL\SERVICE.LOG file.


   6.2 READ-ONLY FILES

   Some files being updated by this FixPak may have the Read-Only attribute
   set. If you are using the A:SERVICE method to install this FixPak you
   will be asked if you want the files replaced.

   Press the "OK" button.


   6.3 SYSLEVEL FILE LOCATIONS

   This FixPak will service directories based on the location of a supported
   SYSLEVEL.OS2 file.  Please check your system to make sure extra copies of
   this file are not located in directories other than:

     \OS2\INSTALL\SYSLEVEL.OS2 on the boot drive of your OS/2 partition(s)


   If additional copies of these files are found in other locations on your
   hard disk then CSF will try to service files as follows:


   
                                             Corrective Service Facility  31


                   October 28, 1999 - Warp 4 FixPak XRIM012

   For \OS2\INSTALL\SYSLEVEL.OS2

     ..\..\           all files in a directory two levels above (toward the
                      root). This should be the root directory of your boot
                      drive.

     ..\*             all files in a directory one level above (toward the root)
                      and all subdirectories below. This should be the OS2
                      directory and subdirectories.

     ..\..\VT\*       all files in the VT directory and subdirectories.

     ..\..\PSFONTS\*  all files in the PSFONTS directory and subdirectories.

     ..\..\LANGUAGE\* all files in the LANGUAGE directory and subdirectories.

     ..\..\OPENDOC\*  all files in the OPENDOC directory and subdirectories.




   6.4 RELOCATED OS/2 FILE SUPPORT

   If you have moved OS/2 files or directories to a drive other than the one
   the SYSLEVEL.OS2 file is on, do the following in order to have them
   serviced:

   þ  Create a file named USERDIRS.OS2 in the \OS2\INSTALL directory of the
      OS\2 Warp 4 partition to be serviced.

      In this file, place the full path to the directories you want to be
      serviced. Assuming your boot drive is C: and you installed Multimedia
      on the D: drive and manually moved WINOS2 support to the E: drive:



















   
                                             Corrective Service Facility  32


                   October 28, 1999 - Warp 4 FixPak XRIM012

       D:\MMOS2
       D:\MMOS2\DLL
       D:\MMOS2\DSP
       D:\MMOS2\HELP
       D:\MMOS2\IMAGES
       D:\MMOS2\INETTEMP
       D:\MMOS2\INSTALL
       D:\MMOS2\MACROS
       D:\MMOS2\MOVIES
       D:\MMOS2\SOUNDS
       D:\MMOS2\SOUNDS\DESKTOP
       D:\MMOS2\SOUNDS\GARDEN
       D:\MMOS2\SOUNDS\OCEAN
       D:\MMOS2\SOUNDS\SPACE
       E:\OS2\MDOS\WINOS2
       E:\OS2\MDOS\WINOS2\SYSTEM
       E:\OS2\MDOS\WINOS2\TEMP


   Note: Leave this file for any future OS/2 Warp 4 FixPaks you might apply.
   The easy way to create this file is to use the DIR command with the /A:D
   /S /B parameters and pipe the output to a file.

      dir d:\mmos2 /a:d /s /b > anyfile


   Then copy that data into the USERDIRS.OS2 file.

   With CSF release level F.137B or later, you can use wildcards, so your
   USERDIRS.OS2 file would be much simpler and would look like:

       D:\MMOS2\*
       E:\OS2\MDOS\WINOS2\*



















   
                                             Corrective Service Facility  33


                   October 28, 1999 - Warp 4 FixPak XRIM012

   7.0 INSTALLATION PROCESS



   7.1 BEFORE INSTALLATION

   Before installing any FixPak, run CHKDSK /F against all drives on your
   system to correct any file system errors that might be present. You
   cannot do this while OS/2 is active. You must shut down and run CHKDSK by
   one of the following methods:

   þ  Boot from your Installation, DISK 1 and DISK 2 diskettes.  If your
      file system is HPFS, then put the diskette with CHKDSK and UHPFS.DLL
      on it in your A: drive before issuing the CHKDSK command.
   þ  Boot from the Utilities disk you created via the "Create Utility
      Diskettes" icon in the System Setup folder.
   þ  Boot from a different OS/2 partition.

   Once CHKDSK has completed, reboot your system then shutdown all running
   applications before starting the FixPak installation.


   7.2 METHOD 1: INSTALL FROM BOOTED OS/2 PARTITION.

   Note: CS_???.EXE below means CS_141 or later.

   Follow the instructions in the READ.ME file that comes in the CS_???.EXE
   self-extracting zip file.  This explains how to use the CS_???.EXE file
   and the various ways you can install a FixPak with this level of CSF
   code.

   Here are some additional notes:

   Follow the displayed instructions.  When prompted to insert Corrective
   Service Diskette 1 (not CSF DISK Diskette 1), place FixPak XRIM012
   Corrective Service Diskette 1 in drive A. Repeat for the rest of the
   FixPak disks when requested to do so.

   It can take a considerable length of time for the Corrective Service
   Facility to scan your hard disk for serviceable files.  In some cases, it
   has taken as long as 40 minutes.  Please be patient and allow this
   process to complete.

   If this is the first OS/2 Warp FixPak you have applied to this system,
   then enter the path to the directory where a copy of replaced files will
   be stored (for example, D:\ARCHIVE or E:\FIXPAK\ARC, etc.)

   Note: This ARCHIVE directory is not related to the ARCHIVES directory
   built into OS/2 Warp 3 and Warp 4. Please specify a different path.  You
   must specify a different ARCHIVE directory for each product to be
   serviced.

   
                                                    Installation Process  34


                   October 28, 1999 - Warp 4 FixPak XRIM012

   If this is not the first OS/2 Warp FixPak, then enter the path to the
   BACKUP directory where a copy of replaced files will be stored (for
   example, D:\BACKUP).

   Note: You must specify a different BACKUP directory for each product to
   be serviced.

   Make sure there is sufficient space available on the drive you specify
   for archive or backup.  Even though these files are kept in compressed
   (PACK2) format, they can take up a lot of space on the drive.

   During the installation process you may see messages about Archiving,
   Updating and Deferring service.

   þ  Archiving saves a compressed copy of the original file in the ARCHIVE
      or BACKUP path you specified.
   þ  Updating means the original files are replaced with the new ones from
      this FixPak.
   þ  Deferring service means the file to be updated is currently in use by
      the system and cannot be updated.  The new files from the FixPak are
      placed in unpacked format in the \IBMCSFLK\FIX directory on the drive
      with the most free space.  They are processed by the locked file
      device driver during reboot after you shut down the system.

   See the section "FixPak Corrective Service levels and disk layouts" for
   the CSD levels this FixPak applies to.

   You will see the following during reboot of the system if you applied
   service to the OS/2 partition you were booted from.

      The locked file driver is loaded.

             Processing locked files

             Processing complete


   The system will do one automatic reboot after the Locked File Device
   Driver has completed.


   7.3 METHOD 2: INSTALL FROM ALTERNATE BOOTABLE MEDIA

   Note: CS_???.EXE below means CS_141 or later.

   Follow the instructions in the READ.ME file that comes in the CS_???.EXE
   self-extracting zip file.  This explains how to use the CS_???.EXE file
   and the various ways you can install a FixPak with this level of CSF
   code.



   
                                                    Installation Process  35


                   October 28, 1999 - Warp 4 FixPak XRIM012

   Here are some additional notes:

   This method does not prompt the user for any information.  No interaction
   with the user takes place other than requests to put the next diskette in
   drive A. All serviceable partitions on your system will be updated
   automatically unless you have modified the default response file.  Be
   especially careful of extra SYSLEVEL.OS2 or SYSLEVEL.MPM files when using
   this method because they can cause CSF to apply service to directories
   you do not want serviced.

   See the section "FixPak Corrective Service levels and disk layouts" for
   the CSD levels this FixPak applies to.

   Note: It can take a considerable length of time for the Corrective
   Service Facility to scan your hard disk for serviceable files.  Please be
   patient and allow this process to complete.

   Note: You can edit the response file to control some of the actions taken
   by FSERVICE.EXE while applying a FixPak.  See the READ.ME file or use the
   VIEW command to look at the file README.INF.  They are part of
   CS_???.EXE.


   7.4 ADDITIONAL CORRECTIVE SERVICE FACILITY INFORMATION

   Additional information on the Corrective Service Facility, like how to
   backout a FixPak, is available from the README.INF file on the first
   Corrective Service Facility disk.  To view this file, place CSF disk 1 in
   drive A and enter VIEW A:\README.INF.

   There is also some additional information in the READ.ME file.


   7.5 FIXPAKS ON CD-ROM

   Both the IBM Technical Connection and the IBM Developer Connection
   contain the latest OS/2 and LAN FixPaks that were available at publishing
   time.

   The IBM Technical Connection homepage on the World Wide Web is located
   at:

   þ  http://www.ibm.com/Support/techconn/index.htm

   The IBM Developer Connection homepage on the World Wide Web is located
   at:

   þ  http://www.developer.ibm.com/devcon/titlepg.htm

   Check these WWW sites for content and ordering information.


   
                                                    Installation Process  36


                   October 28, 1999 - Warp 4 FixPak XRIM012

   8.0 CSD LEVEL OF SYSLEVEL.OS2

   The Current CSD level field of the SYSLEVEL.OS2 file in each serviced
   partition will be updated with the name of the FixPak when it is applied.

   This is a major change from previous CSF releases. The Prior CSD level
   field will be left asis. This means when you use the SYSLEVEL command to
   look at the release levels of products on your system, you will see the
   following for SYSLEVEL.OS2.

   Before a FixPak is applied using the F.138B CSF build (or later)

      E:\OS2\INSTALL\SYSLEVEL.OS2
      IBM OS/2 Base Operating System
      Version 4.00     Component ID 5639A6100
      Type 0C
      Current CSD level: XR04000
      Prior   CSD level: XR04000


   After a FixPak is applied using the F.138B CSF build (or later)

      E:\OS2\INSTALL\SYSLEVEL.OS2
      IBM OS/2 Base Operating System
      Version 4.00     Component ID 5639A6100
      Type 0C
      Current CSD level: XR0M008
      Prior   CSD level: XR04000


   All fix information is recorded in SERVICE.LOG. Look at the file

      \OS2\INSTALL\SERVICE.LOG


   on your boot drive for information relating to the installation of
   FixPaks on your system.

   Additionally, you can use the VER /R command to see the current revision
   of OS/2 installed.  The response will look like the following for this
   FixPak:

   The Operating System/2 Version is 4.00
   Revision 9.036


   The first page of this document has a line that looks like:

   Build Level: n.nnn



   
                                               CSD level of SYSLEVEL.OS2  37


                   October 28, 1999 - Warp 4 FixPak XRIM012

   That is the number you should see for this FixPak when you issue the VER
   /R command.


   8.0.1 NEW SYSLEVEL.FPK

   A SYSLEVEL.FPK file has been added to all Warp 4 FixPaks, beginning with
   XR_M004.  It is titled "OS/2 Warp 4 Service Level".  It contains the name
   of the currently installed FixPak in both the Current and Previous CSD
   level fields and is located in the same directory the SYSLEVEL.OS2 file
   is located in which should be \OS2\INSTALL.

   The easiest way to look at SYSLEVEL information is to use the SYSLEVEL
   command and redirect the output to a file then edit the file and search
   for SYSLEVEL.FPK.





































   
                                               CSD level of SYSLEVEL.OS2  38


                   October 28, 1999 - Warp 4 FixPak XRIM012

   9.0 FIXPAK CORRECTIVE SERVICE LEVELS AND DISK LAYOUTS

   Build Level: 9.036

   Product location on CSD:  A:\FIX\OS2.1
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.00
   Fixpak name:   XRIM012_   (Country = Italy)
   Pre-requisite CSD Level:  XRI4000_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRIM012_   (Country = Italy)
   Pre-requisite CSD Level:  XRI4010_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRIM012_   (Country = Italy)
   Pre-requisite CSD Level:  XRI4010_
   System Id:  1000
   Component Id:  5639A6120
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*
   Will create the following directories
      ..\..\OS2   Stub File:  @OS2DIR

      ..\..\OS2\DLL   Stub File:  @DLLDIR

      ..\..\OS2\BOOT   Stub File:  @BOOTDIR

      ..\..\OS2\SYSTEM   Stub File:  @SYSTDIR


   
                       FixPak Corrective Service levels and disk layouts  39


                   October 28, 1999 - Warp 4 FixPak XRIM012

      ..\..\OS2\INSTALL   Stub File:  @INSTDIR

      ..\..\OS2\APPS   Stub File:  @APPSDIR

      ..\..\OS2\SYSTEM\RAS   Stub File:  @RASDIR

      ..\..\OS2\SYSTEM\TRACE   Stub File:  @TRACDIR

      ..\..\LANGUAGE\CODEPAGE   Stub File:  @CDPGDIR


   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   ARACONV.EXE   ARACONV.EX_    15    07/20/1999  19:52    62183  BF4810AB
   ASIACOL.DLL   ASIACOL.DL_    11    07/26/1999  13:26   158732  DDBF4510
   AVIO.DLL      AVIO.DL_       14    09/15/1999  15:45    53923  0086DB5F
   BACKUP.EXE    BACKUP.EX_     16    10/18/1999  12:26    28196  75B4A2CA
   BDIME.DLL     BDIME.DL_      16    03/25/1999  13:18    11911  54EED67F
   BE.KBL        BE.KB_         17    07/26/1999  13:31      972  4D2B8790
   BLDLEVEL.EXE  BLDLEVEL.EX_   15    09/15/1998  11:32    43974  F7F6C3CC
   BOOTDISK.EXE  BOOTDISK.EX_   14    10/18/1999  12:14    61057  04D0EF80
   BOOTDISK.HLP  BOOTDISK.HL_   16    10/18/1999  12:14    13511  9804F244
   BVSCALLS.DLL  BVSCALLS.DL_   17    10/18/1999  11:50      512  9257E1DF
   BY.KBL        BY.KB_         17    07/26/1999  13:31     1292  098F3808
   CA.KBL        CA.KB_         17    07/26/1999  13:31     1214  C900CD8F
   CACHE.EXE     CACHE.EX_      16    10/18/1999  12:18    11820  D67E6DFE
   CARDINFO.DAT  CARDINFO.DA_   16    09/15/1999  14:55    55417  F9833E41
   CDFS.IFS      CDFS.IF_       16    10/18/1999  11:46    46021  EC6B0140
   CDFS.TDF      CDFS.TD_       17    10/18/1999  11:46     2113  7EB85B0C
   CDROM.TBL     CDROM.TB_      17    11/12/1996  13:38     4365  22986660
   CF.KBL        CF.KB_         17    07/26/1999  13:31      956  548C7599
   CHKDSK.COM    CHKDSK.CO_     14    10/18/1999  12:20    72256  A44E27CA
   CHKDSK.SYS    CHKDSK.SY_     17    04/01/1999  17:10      747  11D681C8
   CHKDSK32.DLL  CHKDSK32.DL_   12    10/18/1999  12:19   122407  2ED8222D
   CHKDSK32.EXE  CHKDSK32.EX_   16    10/18/1999  12:19     6417  42447C60
   CLOCK01.SYS   CLOCK01.SY_    16    07/12/1999  16:40     4460  3DEB495B
   CLOCK02.SYS   CLOCK02.SY_    16    07/12/1999  16:40     4302  E05DF2F7
   CMD.EXE       CMD.EX_        13    10/18/1999  12:22    74896  586988F5
   COMM.DRV      COMM.DR_       16    10/27/1999  16:22     9488  B31ACAC0
   COMMAND.COM   COMMAND.CO_     7    10/18/1999  12:21    56088  1681E936
   CONTROL.PM    CONTROL.PM_    16    10/18/1999  11:22     8529  505414EA
   COUNTRY.SYS   COUNTRY.SY_    16    03/16/1999  16:35    50947  19A5A533
   COUR.OFM      COUR.OF_       16    03/15/1999  13:45     6163  E932E21E
   COUR.PFB      COUR.PF_       10    03/15/1999  13:46   137111  48049C47
   COUR.PFM      COU1.PF_       17    03/15/1999  13:45      674  EB24F168
   COURB.OFM     COURB.OF_      16    03/15/1999  13:45     6173  31304A2B
   COURB.PFB     COURB.PF_      10    03/15/1999  13:46   140829  503DA614
   COURB.PFM     COUR1.PF_      17    03/15/1999  13:45      679  1EF9DD6B
   COURBI.OFM    COURBI.OF_     16    03/15/1999  13:45     6187  0F7DE5D1

   
                       FixPak Corrective Service levels and disk layouts  40


                   October 28, 1999 - Warp 4 FixPak XRIM012

   COURBI.PFB    COURBI.PF_     10    03/15/1999  13:46   136240  16421E63
   COURBI.PFM    COURB1.PF_     17    03/15/1999  13:45      685  D0390DF6
   COURI.OFM     COURI.OF_      16    03/15/1999  13:45     6178  4FCF133A
   COURI.PFB     COURI.PF_      10    03/15/1999  13:46   137394  71C135E2
   COURI.PFM     COUR2.PF_      17    03/15/1999  13:45      681  A6EEB882
   COURIER.FON   COURIER.FO_    15    04/07/1999  14:14    77826  231DA54F
   COURIERI.FON  COURIERI.FO_   14    04/07/1999  14:09    86641  F9589FB8
   CPG01256.TBL  CPG01256.TB_   17    04/12/1999  15:51    27264  221D21BE
   CREX.MSG      CREX.MS_       17    09/19/1996  15:44     2865  84FD8E0E
   CREXUTIL.DLL  CREXUTIL.DL_   15    11/20/1998  15:58    47837  2280613F
   CREXX.DLL     CREXX2.DL_     10    04/01/1999  14:20   266031  D5796A5F
   CZ.KBL        CZ.KB_         17    07/26/1999  13:31     1014  001CBBF9
   DDINSTAL.EXE  DDINSTAL.EX_   15    10/18/1999  12:05    35367  0ACEF6FE
   DE.KBL        DE.KB_         17    07/26/1999  13:31      958  263C6312
   DE453.KBL     DE453.KB_      17    07/26/1999  13:31     1354  241C7442
   DF_DEB.EXE    DF_DEB.EX_     13    08/10/1999  15:31   135999  932AE7C6
   DF_RET.EXE    DF_RET.EX_     13    07/27/1999  11:50   136255  0F67E0FB
   DIBDRVR.DLL   DIBDRVR.DL_    17    10/22/1997  23:20     2267  1429B272
   DICTATE.EXE   DICTATE.EX_    14    05/06/1998  11:58    51391  45FF5274
   DICTDLL.DLL   DICTDLL.DL_    14    12/21/1997  01:28    51187  CF8FB9CA
   DISPLAY.DLL   DISPLAY.DL_    15    04/07/1999  15:46    46574  82EEAAFC
   DIVE.DLL      DIVE.DL_       13    08/03/1999  12:54    69660  71D0598D
   DK.KBL        DK.KB_         17    07/26/1999  13:31      928  B2992DE9
   DMQSPROF.DLL  DMQSPROF.DL_    1    04/07/1999  16:01    39033  EBEAAD39
   DOSCALL1.DLL  DOSCALL1.DL_   12    10/18/1999  11:52   125686  29A8E751
   DOSCALL1.SYM  DOSCALL1.SY_   15    10/18/1999  11:51    42052  140235B6
   DOSCALL1.TDF  DOSCALL1.TD_   17    10/18/1999  11:52     5426  629A5911
   DOSKRNL       DOSKRNL.___    16    10/18/1999  11:45    30621  F689F043
   DRVMAP.INF    DRVMAP.IN_     16    10/18/1999  11:22    13026  914A6096
   DSPINSTL.EXE  DSPINSTL.EX_   12    10/18/1999  12:11   118184  8552A709
   DSPRES.DLL    DSPRES1.DL_     7    04/07/1999  14:09   376488  FF6B63F9
   DSPRES.DLL    DSPRES.DL_      7    04/07/1999  14:09   376488  FFB4A3F9
   DTRACE.DOC    DTRACE.DO_     16    04/21/1999  10:58    75371  D5765F89
   DTRACE.EXE    DTRACE1.EX_    14    07/26/1999  15:40    48906  8CCC0389
   DTRACE.EXE    DTRACE.EX_     14    07/26/1999  15:40    48906  8CCC0389
   E.EXE         E.EX_          14    10/18/1999  12:29    61795  1989F013
   EAUTIL.EXE    EAUTIL.EX_     16    10/18/1999  12:24    37984  BA214329
   EJECT.EXE     EJECT.EX_      16    10/18/1999  12:29    25648  36A39A28
   EL.KBL        EL.KB_         17    07/26/1999  13:31     1396  5C248F65
   EL459.KBL     EL459.KB_      17    07/26/1999  13:31     1372  06998499
   ENGINE.EXE    ENGINE.EX_      6    07/23/1997  11:39   440424  C247CBAA
   EPM.EXE       EPM.EX_        16    10/18/1999  11:19    19681  8904AF99
   ERLOGGER.EXE  ERLOGGER.EX_   15    10/18/1999  11:55    34320  A28AABCD
   ERRLOG.DLL    ERRLOG.DL_     13    10/14/1999  14:40    72594  2ABFC41D
   ES.KBL        ES.KB_         17    07/26/1999  13:31      920  6F969662
   ETKC603.DLL   ETKC603.DL_    12    12/16/1997  15:06   135759  6B2503C2
   ETKE603.DLL   ETKE603.DL_     5    07/20/1999  19:50   753974  DCBBA2A5
   FDISK.COM     FDISK.CO_      13    10/18/1999  12:28   117375  26595275
   FDISKPM.DLL   FDISKPM.DL_    16    10/18/1999  12:29     8243  7048E202
   FDISKPM.EXE   FDISKPM.EX_    14    10/18/1999  12:29    62530  588670BF
   FFST.DLL      FFST.DL_       16    04/03/1997  19:03    11425  C6365786

   
                       FixPak Corrective Service levels and disk layouts  41


                   October 28, 1999 - Warp 4 FixPak XRIM012

   FFSTCONF.EXE  FFSTCONF.EX_   13    07/26/1999  15:41    68669  8EA6E581
   FFSTPCT.EXE   FFSTPCT.EX_    13    07/26/1999  15:42    69583  7B7162BF
   FI.KBL        FI.KB_         17    07/26/1999  13:31      940  8B5F64D8
   FILT.DLL      FILT.DL_       16    09/15/1999  13:32    22888  EF7E83E6
   FKA.DLL       FKA.DL_        16    10/10/1997  01:03    13997  0504EDAA
   FORMAT.COM    FORMAT.CO_     15    10/18/1999  12:24    71456  97A6113A
   FR.KBL        FR.KB_         17    07/26/1999  13:31      950  EC3E7D3A
   FSFILTER.SYS  FSFILTER.SY_   16    10/18/1999  11:53    12988  93E679D6
   GDI.EXE       GDI.EX_        10    10/27/1999  15:57   226128  962F30D6
   GRADD.SYS     GRADD.SY_      17    04/07/1999  17:44     1195  98CBC4DC
   GRE2VMAN.DLL  GRE2VMAN.DL_   16    04/07/1999  17:43    17901  95F8D672
   HDMON.EXE     HDMON.EX_      13    10/18/1999  11:59    75091  BA19BB52
   HELPMGR.DLL   HELPMGR.DL_     8    07/24/1999  15:26   249825  EFCB1757
   HELPMSG.EXE   HELPMSG.EX_    16    10/18/1999  12:25    37792  4EC32A43
   HELV.FON      HELV.FO_       11    04/07/1999  14:14   171252  A0742261
   HELV.OFM      HELV.OF_       16    03/15/1999  13:45     6793  FF46E30D
   HELV.PFB      HELV.PF_       11    03/15/1999  13:46   120578  0DA723CF
   HELV.PFM      HEL1.PF_       17    03/15/1999  13:45     1096  C722995E
   HELVB.OFM     HELVB.OF_      16    03/15/1999  13:45     6785  94469F2F
   HELVB.PFB     HELVB.PF_      11    03/15/1999  13:46   123085  0037FB2B
   HELVB.PFM     HELV1.PF_      17    03/15/1999  13:45     1089  9A484EA2
   HELVBI.OFM    HELVBI.OF_     16    03/15/1999  13:45     6787  4196DDD9
   HELVBI.PFB    HELVBI.PF_     11    03/15/1999  13:46   124245  46A18ABC
   HELVBI.PFM    HELVB1.PF_     17    03/15/1999  13:45     1087  06B5E29D
   HELVI.FON     HELVI.FO_      10    04/07/1999  14:09   199523  17786C48
   HELVI.OFM     HELVI.OF_      16    03/15/1999  13:45     6772  3B3191CD
   HELVI.PFB     HELVI.PF_      11    03/15/1999  13:47   123355  48E064F0
   HELVI.PFM     HELV2.PF_      17    03/15/1999  13:45     1079  CD475F06
   HPFS.IFS      HPFS.IF_       13    10/18/1999  12:17   140866  9B90C6CB
   HPFS.TDF      HPFS.TD_       17    08/10/1999  15:16     1620  0ABC15D1
   HR.KBL        HR.KB_         17    07/26/1999  13:31      982  C69C0318
   HU.KBL        HU.KB_         17    07/26/1999  13:31     1006  8F146132
   IBM1004       IBM1004.___    17    07/26/1999  13:23     3584  C687A8BA
   IBM1125       IBM1125.___    17    07/26/1999  13:23     4320  DFBF4607
   IBM1131       IBM1131.___    17    07/26/1999  13:23     4320  87212A19
   IBM1140       IBM1140.___    17    07/26/1999  13:23     2816  511E46AE
   IBM1141       IBM1141.___    17    07/26/1999  13:23     2784  51C4B993
   IBM1142       IBM1142.___    17    07/26/1999  13:23     2816  17E42197
   IBM1143       IBM1143.___    17    07/26/1999  13:23     2816  3FE17606
   IBM1144       IBM1144.___    17    07/26/1999  13:23     2784  CE079525
   IBM1145       IBM1145.___    17    07/26/1999  13:23     2784  3E0EE64E
   IBM1146       IBM1146.___    17    07/26/1999  13:23     2816  E88C76A8
   IBM1147       IBM1147.___    17    07/26/1999  13:23     2784  2336B680
   IBM1148       IBM1148.___    17    07/26/1999  13:23     2816  6101E543
   IBM1250       IBM1250.___    17    07/26/1999  13:24     3552  1972EF6E
   IBM1251       IBM1251.___    17    07/26/1999  13:24     3328  1D8186C1
   IBM1252       IBM1252.___    17    07/26/1999  13:24     3552  ADB9AFE6
   IBM1253       IBM1253.___    17    07/26/1999  13:24     3552  B42CF613
   IBM1254       IBM1254.___    17    07/26/1999  13:24     3552  99377BE5
   IBM1255       IBM1255.___    17    07/26/1999  13:24     3808  77F8C1B7
   IBM1256       IBM1256.___    17    07/26/1999  13:24     4320  68394093

   
                       FixPak Corrective Service levels and disk layouts  42


                   October 28, 1999 - Warp 4 FixPak XRIM012

   IBM1257       IBM1257.___    17    07/26/1999  13:24     3296  7FABC453
   IBM813        IBM813.___     17    07/26/1999  13:24     3072  DA4A683C
   IBM850        IBM850.___     17    07/26/1999  13:24     4320  42BF69F4
   IBM852        IBM852.___     17    07/26/1999  13:24     4608  44C19E65
   IBM857        IBM857.___     17    07/26/1999  13:24     4352  226E6FF6
   IBM859        IBM859.___     17    07/26/1999  13:24     4320  B68FB360
   IBM862        IBM862.___     17    07/26/1999  13:24     4576  ECCF6ADB
   IBM864        IBM864.___     17    07/26/1999  13:24     4576  E55C982C
   IBM869        IBM869.___     17    07/26/1999  13:24     4320  E2D98857
   IBM923        IBM923.___     17    07/26/1999  13:24     2784  ED42AC6D
   IBM924        IBM924.___     17    07/26/1999  13:24     2784  FD6977EE
   IBMOPTNS.DLL  IBMOPTNS.DL_   16    09/15/1999  14:55    19088  85020BC2
   ICONEDIT.EXE  ICONEDIT.EX_   12    10/18/1999  11:18   110896  F51E380A
   IFGDI2VM.DRV  IFGDI2VM.DR_   15    04/07/1999  16:06    92520  E81825AD
   INST_DOS.EXE  INST_DOS.EX_   15    07/24/1999  15:24    36466  F82FE8CF
   INSTALL.EXE   INSTALL.EX_     6    10/18/1999  11:57   386328  9D466151
   IOPROC.DLL    IOPROC.DL_     15    09/15/1999  15:47    37878  87A77219
   IS.KBL        IS.KB_         17    07/26/1999  13:31      940  275478F8
   IS458.KBL     IS458.KB_      17    07/26/1999  13:31      928  83CFF66C
   ISGDI2VM.DRV  ISGDI2VM.DR_   15    04/07/1999  16:06    91328  1C3F9230
   IT.KBL        IT.KB_         17    07/26/1999  13:31      876  AC171867
   IT142.KBL     IT142.KB_      17    07/26/1999  13:31      854  E528CF20
   KERNEL.SDF    KERNEL.SD_     15    07/21/1999  12:17   470436  78076147
   KERNELD.SDF   KERNELD.SD_    15    07/27/1999  11:51   471763  0D8DF501
   KEYBOARD.DCP  KEYBOARD.DC_   16    03/25/1999  14:34   315109  14E81503
   KRNLBDEV.TDF  KRNLBDEV.TD_   17    10/18/1999  11:44     3703  39E19063
   KRNLBFS.TDF   KRNLBFS.TD_    17    10/18/1999  11:44     4464  95AE06C4
   KRNLBLDR.TDF  KRNLBLDR.TD_   17    10/18/1999  11:44     5581  817EA2C9
   KRNLBPG.TDF   KRNLBPG.TD_    17    10/18/1999  11:44     3203  E4EE3A37
   KRNLBSEL.TDF  KRNLBSEL.TD_   17    10/18/1999  11:44     2727  5FA0F7D2
   KRNLBSEM.TDF  KRNLBSEM.TD_   17    10/18/1999  11:44     1792  A4DA8AD0
   KRNLBSM.TDF   KRNLBSM.TD_    17    10/18/1999  11:44     1321  6B9C9039
   KRNLBTK.TDF   KRNLBTK.TD_    16    10/18/1999  11:44    14363  26DD2556
   KRNLBTOM.TDF  KRNLBTOM.TD_   17    10/18/1999  11:44      925  4072639E
   KRNLBVDM.TDF  KRNLBVDM.TD_   16    10/18/1999  11:44    13917  25847C02
   KRNLBVM.TDF   KRNLBVM.TD_    17    10/18/1999  11:44     5514  1313FD23
   KRNLDDEV.TDF  KRNLDDEV.TD_   17    10/18/1999  11:43     3678  5269FDE6
   KRNLDFS.TDF   KRNLDFS.TD_    17    10/18/1999  11:43     4355  EF67C534
   KRNLDLDR.TDF  KRNLDLDR.TD_   17    10/18/1999  11:43     5609  FDF032CA
   KRNLDPG.TDF   KRNLDPG.TD_    17    10/18/1999  11:43     3284  05AD9869
   KRNLDSEL.TDF  KRNLDSEL.TD_   17    10/18/1999  11:43     2814  AF9574CE
   KRNLDSEM.TDF  KRNLDSEM.TD_   17    10/18/1999  11:43     1932  871076BD
   KRNLDSM.TDF   KRNLDSM.TD_    17    10/18/1999  11:43     1321  96CB1D0A
   KRNLDTK.TDF   KRNLDTK.TD_    16    10/18/1999  11:43    14394  0235BA4C
   KRNLDTOM.TDF  KRNLDTOM.TD_   17    10/18/1999  11:43      953  7926008E
   KRNLDVDM.TDF  KRNLDVDM.TD_   16    10/18/1999  11:43    13992  2D8BB6B6
   KRNLDVM.TDF   KRNLDVM.TD_    17    10/18/1999  11:43     5601  62EBE067
   KRNLRDEV.TDF  KRNLRDEV.TD_   17    10/18/1999  11:41     3703  FEAE63E9
   KRNLRFS.TDF   KRNLRFS.TD_    17    10/18/1999  11:41     4464  69A6B341
   KRNLRLDR.TDF  KRNLRLDR.TD_   17    10/18/1999  11:42     5581  ED064811
   KRNLRPG.TDF   KRNLRPG.TD_    17    10/18/1999  11:42     3203  9266B436

   
                       FixPak Corrective Service levels and disk layouts  43


                   October 28, 1999 - Warp 4 FixPak XRIM012

   KRNLRSEL.TDF  KRNLRSEL.TD_   17    10/18/1999  11:42     2727  D0D00FE5
   KRNLRSEM.TDF  KRNLRSEM.TD_   17    10/18/1999  11:42     1792  4ED1E41C
   KRNLRSM.TDF   KRNLRSM.TD_    17    10/18/1999  11:42     1321  4CE618EB
   KRNLRTK.TDF   KRNLRTK.TD_    16    10/18/1999  11:42    14279  30F03526
   KRNLRTOM.TDF  KRNLRTOM.TD_   17    10/18/1999  11:42      897  E574E523
   KRNLRVDM.TDF  KRNLRVDM.TD_   16    10/18/1999  11:42    13749  7E712035
   KRNLRVM.TDF   KRNLRVM.TD_    17    10/18/1999  11:42     5514  2F4D011A
   LIBCM.DLL     LIBCM.DL_       9    04/08/1999  16:09   210916  5ADAC307
   LIBCN.DLL     LIBCN.DL_      14    04/08/1999  16:08    57340  7BBE3105
   LIBCS.DLL     LIBCS.DL_       3    04/08/1999  16:08   192386  978D3E9F
   LIBUNI.DLL    LIBUNI.DL_     13    07/26/1999  13:34    81242  3A2AD0AD
   LOCALE.DLL    LOCALE.DL_      9    07/26/1999  13:23   107887  2BD6ACC6
   MAIN.CPL      MAIN.CP_       13    10/27/1999  16:00   149472  83200A3F
   MAKETSF.EXE   MAKETSF.EX_    15    07/23/1999  12:01    37516  94D71209
   MAPTSF.CMD    MAPTSF.CM_     16    04/01/1999  14:23    16803  0EC9489E
   MIDI.SYS      MIDI.SY_       16    05/03/1999  18:10    26328  FA7C0728
   MIDIMCD.DLL   MIDIMCD.DL_    17    09/15/1999  13:24      532  40B11B63
   MIGRATE.EXE   MIGRATE.EX_    12    10/18/1999  12:11   118729  7FA47223
   MINSTALL.EXE  MINSTALL.EX_   11    09/15/1999  14:56   152580  112EFCED
   MINXOBJ.DLL   MINXOBJ.DL_    15    09/01/1999  10:54    31778  00E6E4D4
   MIRRORS.DLL   MIRRORS.DL_     6    09/19/1996  15:53   444744  8D936F24
   MMODPTS.DLL   MMODPTS.DL_     8    07/27/1999  08:49   184020  2FE7AB91
   MMPARTS.DLL   MMPARTS.DL_     2    07/27/1999  08:53  1532066  3E68CCB8
   MMPM.DLL      MMPM.DL_        6    09/15/1999  13:45   431781  A58AF34F
   MMPTMRI.DLL   MMPTMRI.DL_    12    09/15/1999  14:53   229392  562DF39C
   MMSOUND.DRV   MMSOUND.DR_    16    07/19/1999  17:07     3456  97D7C150
   MONCALLS.DLL  MONCALLS.DL_   17    10/18/1999  11:48     2472  A9F4696D
   MONCALLS.TDF  MONCALLS.TD_   17    10/18/1999  11:48     1139  6AAB253C
   MPGIO.DLL     MPGIO.DL_      14    09/15/1999  15:48    59267  4115B0F7
   NAMEADD.EXE   NAMEADD.EX_    16    07/24/1999  13:03    23040  04DDD0A6
   NAMECOPY.EXE  NAMECOPY.EX_   16    07/24/1999  13:03    23040  E141E851
   NAMECSSP.DLL  NAMECSSP.DL_   14    12/04/1997  10:43    61123  E0DF5D8E
   NAMEDEL.EXE   NAMEDEL.EX_    16    07/24/1999  13:03    23040  2D1C90A7
   NAMEDSP.DLL   NAMEDSP.DL_    12    12/04/1997  10:43   123427  8AA06A69
   NAMEEXT.EXE   NAMEEXT.EX_    16    07/24/1999  13:03    23040  651C90A9
   NAMEFT.DLL    NAMEFT.DL_     14    12/04/1997  10:43    66274  19FCCF75
   NAMEFW.DLL    NAMEFW.DL_     13    12/04/1997  10:43    72312  3F954546
   NAMEINFO.DLL  NAMEINFO.DL_   15    12/04/1997  10:43    47973  684F0BA6
   NAMEINI.DLL   NAMEINI.DL_    14    12/04/1997  10:43    59027  FAEB417E
   NAMEMOD.EXE   NAMEMOD.EX_    16    07/24/1999  13:03    23040  14DDD0A7
   NAMEMOVE.EXE  NAMEMOVE.EX_   16    07/24/1999  13:03    23040  E941E84F
   NAMEOSP.DLL   NAMEOSP.DL_    14    12/04/1997  10:43    52725  9934508A
   NL.KBL        NL.KB_         17    07/26/1999  13:31      954  145D3794
   NO.KBL        NO.KB_         17    07/26/1999  13:31      920  8D019B17
   NWIAPI.DLL    NWIAPI.DL_     16    09/01/1999  10:58    14768  4AD7F259
   OREXUTIL.DLL  ORXUTIL2.DL_   15    11/20/1998  15:58    32797  2A5AAFBD
   OREXX.DLL     OREXX2.DL_      7    07/20/1999  19:44   447475  E9D7E0CF
   OS2CHAR.TDF   OS2CHAR.TD_    16    10/18/1999  11:52    13889  3BC9ECB0
   OS2DASD.DMD   OS2DASD.DM_    15    08/07/1998  12:19    40894  21CB3220
   OS2DUMP       OS2DUMP.___    16    08/10/1999  15:19    14301  703526C0
   OS2K386.EXE   OS2K386.EX_    14    10/27/1999  15:57    80658  77E2AF34

   
                       FixPak Corrective Service levels and disk layouts  44


                   October 28, 1999 - Warp 4 FixPak XRIM012

   OS2KRNL       OS2KRNL.___     3    10/18/1999  11:42   639959  60534AFA
   OS2KRNL.TDF   OS2KRNL.TD_    16    10/18/1999  11:41    16581  B5359C27
   OS2KRNLD.SYM  OS2KRNLD.SY_   12    10/18/1999  11:43   187140  7BBCEB68
   OS2KRNLR.SYM  OS2KRNLR.SY_   12    10/18/1999  11:41   164212  ED04F589
   OS2LDR.MSG    OS2LDR.MS_     16    10/18/1999  11:35     9058  006F1938
   OS2MM.DLL     OS2MM.DL_       9    09/15/1999  14:56   219970  BD889970
   OS2NS.EXE     OS2NS.EX_       6    12/04/1997  11:14    44964  61548D8E
   OS2UGL        OS2UGL.___     16    07/26/1999  13:24    15616  783F2B92
   OS2UGLG       OS2UGLG.___    17    12/12/1997  22:59     8928  AA898322
   OSO001.MSG    OSO001.MS_     13    10/18/1999  10:47   209283  291FC411
   OSO001H.MSG   OSO001H.MS_    13    10/18/1999  10:47   281121  CD4E2249
   PARALLEL.PDR  PARALLEL.PD_   16    10/18/1999  12:25    15984  590BD6D5
   PDUMPSYS.EXE  PDUMPSYS.EX_   15    04/13/1999  09:50    34877  C4D753E7
   PDUMPUSR.EXE  PDUMPUSR.EX_   15    04/13/1999  09:50    34875  6C37F546
   PICV.DLL      PICV.DL_       16    07/24/1999  15:24    26200  C8F6A92B
   PICVIEW.DLL   PICVIEW.DL_    16    10/18/1999  11:49    11298  C0C7474D
   PICVIEW.EXE   PICVIEW.EX_    14    10/18/1999  11:49    69146  ACB687AD
   PL.KBL        PL.KB_         17    07/26/1999  13:31      980  518C037C
   PL457.KBL     PL457.KB_      17    07/26/1999  13:31      882  899F5221
   PMATM.DLL     PMATM.DL_       9    03/15/1999  18:36   224319  71C7F565
   PMBIDI.DLL    PMBIDI.DL_     16    07/20/1999  19:52    12352  E0E87CC2
   PMCHKDSK.DLL  PMCHKDSK.DL_   16    10/18/1999  12:29     5663  2348065B
   PMCHKDSK.EXE  PMCHKDSK.EX_   16    10/18/1999  12:29    28183  960E56D3
   PMCLIP.DLL    PMCLIP.DL_     16    10/22/1997  23:19    21295  2FE91EEA
   PMCTLS.DLL    PMCTLS.DL_      5    10/18/1999  11:39   584866  3D6C7F65
   PMCTLS.SYM    PMCTLS.SY_     15    10/18/1999  11:39    44084  2EA0D659
   PMDDE.DLL     PMDDE.DL_      16    10/18/1999  11:51    28334  F170141A
   PMDDEML.DLL   PMDDEML.DL_    16    09/01/1999  10:00    27706  A4F05C05
   PMDF.EXE      PMDF.EX_        8    07/27/1999  11:32   262900  81F0565E
   PMDFMSG.DLL   PMDFMSG.DL_    15    10/18/1999  11:58    47272  45B6A7E2
   PMDRAG.DLL    PMDRAG.DL_     17    10/18/1999  11:37     1731  801F9938
   PMGPI.DLL     PMGPI.DL_       9    04/13/1999  15:37   229146  10D24DA4
   PMGPI.TDF     PMGPI.TD_      16    04/13/1999  15:37    12338  FD344EBE
   PMGRE.DLL     PMGRE.DL_      17    04/13/1999  15:36     2231  B20E2F7F
   PMGRE.TDF     PMGRE.TD_      17    07/24/1999  15:10     1062  B27472DF
   PMMERGE.DLL   PMMERGE.DL_     1    10/18/1999  11:41  1255155  9947148E
   PMMERGE.SYM   PMMERGE.SY_     5    10/18/1999  11:41   115444  C6C953F7
   PMMLE.DLL     PMMLE.DL_      17    10/14/1999  14:23      673  50270A53
   PMPIC.DLL     PMPIC.DL_      14    07/24/1999  15:24    47206  D0354841
   PMPIC.TDF     PMPIC.TD_      17    07/24/1999  15:24      400  AAA13CFB
   PMPRINT.QPR   PMPRINT.QP_    16    10/18/1999  12:15    11833  87ED0644
   PMSDMRI.DLL   PMSDMRI.DL_    16    10/18/1999  11:37    12800  7689CCC6
   PMSEEK.EXE    PMSEEK.EX_     15    10/18/1999  12:30    31285  706FB664
   PMSHAPI.DLL   PMSHAPI.DL_    17    10/22/1997  22:53     4549  C2E9308A
   PMSHAPI.TDF   PMSHAPI.TD_    17    07/24/1999  15:10     6726  FA07456D
   PMSPL.DLL     PMSPL.DL_       8    10/18/1999  12:14   318775  D646FCBD
   PMSPL.SYM     PMSPL.SY_      16    10/18/1999  12:14    32340  146197CE
   PMSPL.TDF     PMSPL.TD_      17    09/01/1999  10:57     4491  F30A8434
   PMVDMP.DLL    PMVDMP.DL_     15    10/18/1999  11:51    43827  B443D3C2
   PMVDMP.TDF    PMVDMP.TD_     17    10/18/1999  11:51     2661  0A20E353
   PMVIOP.DLL    PMVIOP.DL_     14    10/18/1999  11:51    59170  CCE50D5B

   
                       FixPak Corrective Service levels and disk layouts  45


                   October 28, 1999 - Warp 4 FixPak XRIM012

   PMVIOP.SYM    PMVIOP.SY_     16    10/18/1999  11:51     6628  E434FD03
   PMVIOP.TDF    PMVIOP.TD_     17    10/18/1999  11:51     3551  44D8553C
   PMWIN.DLL     PMWIN.DL_      16    04/13/1999  15:38    11264  93A2E194
   PMWIN.TDF     PMWIN.TD_      16    07/24/1999  15:10     9567  1D9E3978
   PMWIN32.SDF   PMWIN32.SD_    16    10/28/1997  18:56   299617  47F639A5
   PMWINX.DLL    PMWINX.DL_      5    10/18/1999  11:49   530311  60984744
   PMWP.DLL      PMWP.DL_        3    10/18/1999  12:09   926345  AD6A8AA1
   PMWP.SYM      PMWP.SY_       14    10/18/1999  12:09   100420  7326290F
   PMWP.TDF      PMWP.TD_       16    10/18/1999  12:09    13825  BD7C28F5
   PMWPMRI.DLL   PMWPMRI.DL_    14    10/18/1999  12:09    57893  A2C99539
   PO.KBL        PO.KB_         17    07/26/1999  13:31      926  BBED4216
   PROCDUMP.DOC  PROCDUMP.DO_   16    04/01/1999  14:23    62765  B74B1E35
   PROCDUMP.EXE  PROCDUMP.EX_   15    04/13/1999  09:50    47135  A1E3AA08
   PROGMAN.EXE   PROGMAN.EX_    14    10/27/1999  16:00   115712  B4FE238F
   PSSDMON.EXE   PSSDMON.EX_    15    04/06/1999  17:06    27117  A48B4E88
   PSTAT.EXE     PSTAT.EX_      16    10/18/1999  12:25    10963  6765B13A
   QUECALLS.DLL  QUECALLS.DL_   17    10/18/1999  11:48     1024  BE888195
   QUECALLS.TDF  QUECALLS.TD_   17    10/18/1999  11:52     1287  A8A20479
   RAS001.MSG    RAS001.MS_     16    10/18/1999  11:58    30925  0369CACC
   RASH.MSG      RASH.MS_       16    10/18/1999  11:55    12741  440478FB
   README.CID    README.CI_     16    10/18/1999  11:22    52248  FA83FD9C
   README.DBG    README.DB_     16    07/21/1999  10:20    22934  D48AEEF4
   REGCONV.EXE   REGCONV.EX_    15    07/26/1999  11:53    39446  A9C3A641
   REGEDIT.HLP   REGEDIT.HL_    16    09/02/1999  12:41    22682  C2A0298C
   REGEDIT2.EXE  REGEDIT2.EX_    4    07/26/1999  11:53   949760  22D40D4A
   REGISTRY.DLL  REGISTRY.DL_   13    07/24/1999  12:53    81440  4DB049C9
   REGISTRY.MSG  REGISTRY.MS_   17    07/26/1999  11:53      653  37744B5E
   REGISTRY.TDF  REGISTRY.TD_   17    07/24/1999  12:53     7591  E2A663D1
   REPLACE.EXE   REPLACE.EX_    12    10/18/1999  12:30    37995  82C3633D
   RESTORE.EXE   RESTORE.EX_    16    10/18/1999  12:31    36736  56DCB970
   REX.MSG       REX.MS_        17    09/19/1996  15:44     2865  6725D657
   REXX.DLL      CREXX1.DL_     10    04/01/1999  14:20   266031  5DDF8B8E
   REXX.DLL      OREXX1.DL_      7    07/20/1999  19:44   447475  7FFAA0A8
   REXX.IMG      REXX.IM_       10    07/20/1999  19:44   283636  D800799D
   REXXAPI.DLL   REXXAPI.DL_    15    07/23/1998  15:54    29603  057F1B73
   REXXC.EXE     REXXC.EX_      17    07/20/1999  19:44     2758  D08667FF
   REXXCRT.DLL   REXXCRT.DL_    14    03/31/1997  17:35    61195  D865CF3E
   REXXUTIL.DLL  REXXUTIL.DL_   14    11/20/1998  15:58    47837  22A11D3F
   REXXUTIL.DLL  ORXUTIL1.DL_   15    11/20/1998  15:58    32797  2AC4C23D
   RINSTPRN.EXE  RINSTPRN.EX_   10    10/18/1999  12:32   196434  0F9B510D
   RO.KBL        RO.KB_         17    07/26/1999  13:31      944  287BC033
   RSPDDI.EXE    RSPDDI.EX_     16    10/18/1999  12:05    22073  7BF1F6FA
   RSPDSPI.EXE   RSPDSPI.EX_    13    10/18/1999  12:12    95720  EA98AA7B
   RSPINST.EXE   RSPINST.EX_     8    10/18/1999  12:02   431408  7A69F29D
   RSRV.EXE      RSRV.EX_       13    12/04/1997  11:14    78051  2C5067F3
   RU.KBL        RU.KB_         17    07/26/1999  13:31     1144  2D54C7A3
   SCENTER.DLL   SCENTER.DL_     4    10/18/1999  12:27   291973  D3EEC585
   SD.KBL        SD.KB_         17    07/26/1999  13:31     1036  833E7757
   SEAMLESS.DLL  SEAMLESS.DL_   15    10/18/1999  11:51    48655  810CAAAB
   SECUTIL.DLL   SECUTIL.DL_    16    04/01/1999  14:34    21468  49F6B61A
   SEINST.EXE    SEINST.EX_     15    10/18/1999  11:55    37441  4CA0A49A

   
                       FixPak Corrective Service levels and disk layouts  46


                   October 28, 1999 - Warp 4 FixPak XRIM012

   SEMAINT.EXE   SEMAINT.EX_    15    10/18/1999  11:55    67696  1FE1FE34
   SERIAL.PDR    SERIAL.PD_     16    10/18/1999  12:11    19180  4E6A8EE3
   SESAPI.DLL    SESAPI.DL_     16    07/20/1999  19:59    24219  7BDCD32E
   SESDD32.SYS   SESDD32.SY_    14    07/20/1999  19:59   118832  278FEE1C
   SESMGR.DLL    SESMGR.DL_     17    10/18/1999  11:47     1536  205D9B1C
   SESMGR.TDF    SESMGR.TD_     17    10/18/1999  11:52     1877  9A0D060F
   SETBOOT.EXE   SETBOOT.EX_     2    10/18/1999  12:28    17196  28F9F1BC
   SETDEFV.CMD   SETDEFV.CM_    17    06/23/1998  16:25     1652  0A7ED9F3
   SF.KBL        SF.KB_         17    07/26/1999  13:31     1036  7E45199D
   SK.KBL        SK.KB_         17    07/26/1999  13:31     1008  EC2D5647
   SL.KBL        SL.KB_         17    07/26/1999  13:31      982  FD150232
   SOFTDRAW.DLL  SOFTDRAW.DL_    8    04/13/1999  15:30   401003  FDB06A84
   SOM.DLL       SOM.DL_        13    08/13/1996  09:29    88763  7804D814
   SPCHOBJ.DLL   SPCHOBJ.DL_    12    12/21/1997  01:27   132899  E38BD0D7
   SPL1B.DLL     SPL1B.DL_      16    07/27/1999  12:02     5077  0353F1BC
   SQ.KBL        SQ.KB_         17    07/26/1999  13:31      824  D5F858D7
   SSM.DLL       SSM.DL_        17    09/15/1999  13:22     1556  3752E9E2
   SSMDD.SYS     SSMDD.SY_      16    09/15/1999  13:31    36813  B4E8A4BC
   STRACE.EXE    STRACE.EX_     15    10/18/1999  12:31    40318  714F7596
   SV.KBL        SV.KB_         17    07/26/1999  13:31      946  FF0DB860
   SVMC.DLL      SVMC.DL_       11    09/15/1999  15:45    98389  7744C59E
   SVSH.DLL      SVSH.DL_       16    09/15/1999  15:45    23452  5BC7ED08
   SW.DLL        SW.DL_         14    09/15/1999  15:44    66503  B44595F3
   SWITCHRX.CMD  SWITCHRX.CM_   16    05/06/1998  16:31     7928  79CA9FC4
   SYMB.PFM      SYM1.PF_       17    03/15/1999  13:45      679  F258E0BD
   SYSDUMP.EXE   SYSDUMP.EX_    16    07/21/1999  12:16    16000  6605F03E
   SYSINST2.EXE  SYSINST2.EX_   12    10/18/1999  11:59   185360  C31CE9BF
   SYSINSTX.COM  SYSINSTX.CO_   15    10/18/1999  12:26    39472  424BE2D7
   SYSLEVEL.EXE  SYSLEVEL.EX_   15    10/18/1999  11:54    42992  B0403362
   SYSLEVEL.FPK  SYSLEVEL.FP_   17    10/18/1999  15:16      165  352283F0
   SYSLOGPM.EXE  SYSLOGPM.EX_   11    10/18/1999  11:55   138955  1AB174E2
   SYSMONO.FON   SYSMONO.FO_    16    04/07/1999  15:05    21294  FD0CCA3B
   SYSMONOI.FON  SYSMONOI.FO_   16    04/07/1999  14:09    35841  F000FB2C
   SYSSPLIT.CMD  SYSSPLIT.CM_   17    12/02/1998  16:25     3712  A35A41C8
   SYSTEM.TDF    SYSTEM.TD_     16    12/11/1998  09:24    18358  84AF684F
   SYSTEM.TFF    SYSTEM.TF_     16    12/11/1998  09:24    45067  C29E144B
   SYSTEMD.TFF   SYSTEMD.TF_    16    12/11/1998  09:24    45067  3E1735FC
   TDFLST.CMD    TDFLST.CM_     16    12/02/1998  16:25    13564  A45F3592
   TEDIT.EXE     TEDIT.EX_      16    10/18/1999  12:31     9520  DB756FCE
   TEDIT.HLP     TEDIT.HL_      16    10/18/1999  11:22    14678  359365FA
   TESTCFG.SYS   TESTCFG.SY_    16    07/12/1999  16:11     9808  58CE2D16
   TEXTCON1.EXE  TEXTCON1.EX_   15    04/12/1999  15:53    49011  A9471D06
   TFFLST.CMD    TFFLST.CM_     17    12/02/1998  16:25     4638  2AFE15D2
   TIMES.FON     TIMES.FO_      11    04/07/1999  14:14   166150  532C9A51
   TIMESI.FON    TIMESI.FO_     11    04/07/1999  14:09   181173  F3D253CE
   TNR.OFM       TNR.OF_        16    03/15/1999  13:45     6809  33F5154C
   TNR.PFB       TNR.PF_        10    03/15/1999  13:46   145785  BD752E3E
   TNR.PFM       TN1.PF_        17    03/15/1999  13:45     1103  4811CE38
   TNRB.OFM      TNRB.OF_       16    03/15/1999  13:45     6825  36C2110D
   TNRB.PFB      TNRB.PF_        9    03/15/1999  13:47   148564  014EE100
   TNRB.PFM      TNR1.PF_       17    03/15/1999  13:45     1112  6044C543

   
                       FixPak Corrective Service levels and disk layouts  47


                   October 28, 1999 - Warp 4 FixPak XRIM012

   TNRBI.OFM     TNRBI.OF_      16    03/15/1999  13:45     6839  8F51C7B5
   TNRBI.PFB     TNRBI.PF_       9    03/15/1999  13:47   159652  81973739
   TNRBI.PFM     TNRB1.PF_      17    03/15/1999  13:45     1118  690A75CD
   TNRI.OFM      TNRI.OF_       16    03/15/1999  13:45     6830  23B86562
   TNRI.PFB      TNRI.PF_        9    03/15/1999  13:47   157010  5E813D84
   TNRI.PFM      TNR2.PF_       17    03/15/1999  13:45     1114  CA6E659D
   TR.KBL        TR.KB_         17    07/26/1999  13:31      962  29C87B20
   TR440.KBL     TR440.KB_      17    07/26/1999  13:31     1042  622614BA
   TRACE.DOC     TRACE.DO_      16    04/01/1999  16:21    64057  45DDD8C5
   TRACE.EXE     TRACE.EX_      15    10/18/1999  12:31    35136  4277D640
   TRACEDLL.DLL  TRACEDLL.DL_   15    07/26/1999  15:40    46675  4ADBB106
   TRACEFMT.EXE  TRACEFMT.EX_   11    10/18/1999  12:32   156569  8CB57EC6
   TRACEGET.EXE  TRACGET1.EX_   16    07/20/1999  20:07    22026  F16B1EAB
   TRACEGET.EXE  TRACEGET.EX_   16    07/20/1999  20:07    22026  F16B215B
   TRAPDUMP.EXE  TRAPDUMP.EX_   16    07/20/1999  20:10    23068  4C2821DC
   TRAPLOG.EXE   TRAPLOG.EX_    16    07/21/1999  12:16    15056  DE9918A2
   TRC0000.TFF   TRC0000.TF_    17    11/24/1998  09:09      189  0EDB257E
   TRC0001.TFF   TRC0001.TF_    16    07/24/1999  12:53    17168  793E2B9B
   TRC0003.TFF   TRC0003.TF_    17    12/12/1996  17:56     1503  3435868F
   TRC0004.TFF   TRC0004.TF_    17    11/24/1998  09:09     4754  E52D826B
   TRC0005.TFF   TRC0005.TF_    16    10/18/1999  11:44    38713  8B7FABE9
   TRC0006.TFF   TRC0006.TF_    16    12/12/1996  17:19    12356  B2A0674E
   TRC0007.TFF   TRC0007.TF_    17    07/12/1999  15:22     1394  9B783BA9
   TRC0008.TFF   TRC0008.TF_    17    07/12/1999  15:17      544  451F96D2
   TRC0010.TFF   TRC0010.TF_    16    10/18/1999  11:52    13359  5798217F
   TRC0012.TFF   TRC0012.TF_    17    10/18/1999  11:48     1247  1801E145
   TRC0016.TFF   TRC0016.TF_    17    10/18/1999  11:52     1663  A66C2CFB
   TRC0017.TFF   TRC0017.TF_    17    10/18/1999  11:52     5561  3EB3BD4D
   TRC0018.TFF   TRC0018.TF_    16    10/18/1999  11:52    39488  DF261363
   TRC006D.TFF   TRC006D.TF_    16    06/23/1998  19:40    24181  FB8B4954
   TRC00C0.TFF   TRC00C0.TF_    16    07/24/1999  15:10    15970  F972FC65
   TRC00C2.TFF   TRC00C2.TF_    16    07/24/1999  15:10    25991  CC93DB61
   TRC00C3.TFF   TRC00C3.TF_    17    07/24/1999  15:10     3984  8EEF4A9F
   TRC00C4.TFF   TRC00C4.TF_    17    07/24/1999  15:24      288  62203DA4
   TRC00C5.TFF   TRC00C5.TF_    16    04/13/1999  15:37    32994  870A02D8
   TRC00C6.TFF   TRC00C6.TF_    17    09/01/1999  10:57     7146  F49B3CAD
   TRC0100.TFF   TRC0100.TF_    17    10/18/1999  11:44     6190  B1E78A04
   TRC0101.TFF   TRC0101.TF_    16    10/18/1999  11:44     7422  66A156C6
   TRC0102.TFF   TRC0102.TF_    16    10/18/1999  11:44    25895  815413C9
   TRC0103.TFF   TRC0103.TF_    16    10/18/1999  11:44    10057  C08743D5
   TRC0104.TFF   TRC0104.TF_    17    10/18/1999  11:44     5135  C6401228
   TRC0105.TFF   TRC0105.TF_    16    10/18/1999  11:44    28049  AE82BC42
   TRC0106.TFF   TRC0106.TF_    17    10/18/1999  11:44     1835  B1FAB206
   TRC0107.TFF   TRC0107.TF_    17    10/18/1999  11:44     4403  973186DE
   TRC0108.TFF   TRC0108.TF_    16    10/18/1999  11:44     9456  FD1C0AE4
   TRC0109.TFF   TRC0109.TF_    17    10/18/1999  11:44     2535  CF7D3210
   TRC010A.TFF   TRC010A.TF_    17    10/18/1999  11:44     1029  FDEB819A
   TRC0118.TFF   TRC0118.TF_    17    08/10/1999  15:17     2526  465CF705
   TRC0119.TFF   TRC0119.TF_    17    10/18/1999  11:46     3786  6E185CCC
   TRC012C.TFF   TRC012C.TF_    17    10/18/1999  11:51     5361  F96B92C1
   TRC012D.TFF   TRC012D.TF_    17    10/18/1999  11:51     7870  79F5F171

   
                       FixPak Corrective Service levels and disk layouts  48


                   October 28, 1999 - Warp 4 FixPak XRIM012

   TRC012E.TFF   TRC012E.TF_    16    10/18/1999  12:09    32972  8DAFC812
   TRCFORMT.DLL  TRCFORMT.DL_   16    10/18/1999  12:32    27433  02A72307
   TRCUST.EXE    TRCUST.EX_     14    10/18/1999  12:31    98773  9BDFB30B
   TRSPOOL.DOC   TRSPOOL.DO_    16    04/01/1999  14:23     6638  7C5EE1B2
   TRSPOOL.EXE   TRSPOOL1.EX_   15    07/23/1999  12:01    27982  E701548C
   TRSPOOL.EXE   TRSPOOL.EX_    15    07/23/1999  12:01    27982  E701548C
   TRSTOP.EXE    TRSTOP.EX_     16    07/26/1999  15:40    17190  52412AE4
   TRUETYPE.DLL  TRUETYPE.DL_   12    03/15/1999  18:36   128695  FA33A9B8
   UA.KBL        UA.KB_         17    07/26/1999  13:31     1476  4033A2EE
   UCDFS.DLL     UCDFS.DL_      16    10/18/1999  11:46    13264  AE1E6591
   UCONV.DLL     UCONV.DL_      16    07/26/1999  13:34    22819  928668E1
   UHPFS.DLL     UHPFS.DL_      13    10/18/1999  12:19   106512  10191E19
   UK.KBL        UK.KB_         17    07/26/1999  13:31      816  BE2140D7
   UK168.KBL     UK168.KB_      17    07/26/1999  13:31      850  A02B2351
   ULSACT01.MSG  ULSACT01.MS_    5    07/24/1999  14:03      907  CD660D41
   ULSCAU01.MSG  ULSCAU01.MS_    4    07/24/1999  14:03      899  5BFC412F
   ULSDET01.MSG  ULSDET01.MS_    3    07/24/1999  14:03      903  A118B7BE
   ULSERR01.MSG  ULSERR01.MS_   17    07/24/1999  14:03     1967  13B3FAC9
   UNINSTAL.EXE  UNINSTAL.EX_   13    10/18/1999  12:09    99897  41850E80
   UNPACK2.EXE   UNPACK2.EX_    14    10/18/1999  12:16    80144  C3FBFA4B
   USER.EXE      USER.EX_        9    10/27/1999  16:03   281344  C8092140
   USINTER.KBL   USINTER.KB_    17    07/26/1999  13:31     1032  45B0C287
   VBIOS.SYS     VBIOS.SY_      16    10/18/1999  12:32     8816  9351796A
   VCMOS.SYS     VCMOS.SY_      17    10/18/1999  12:33     2272  E9B68EC5
   VDMA.SYS      VDMAPS2.SY_    16    10/18/1999  12:33    14329  D644AF68
   VDMA.SYS      VDMAAT.SY_     11    10/18/1999  12:33    11465  732BDD35
   VDPMI.SYS     VDPMI.SY_      16    10/18/1999  12:33    30624  4B6C2E78
   VDPX.SYS      VDPX.SY_       16    10/18/1999  12:33    26112  C8533448
   VGA.DSP       VGA.DS_        17    07/27/1999  09:40     3094  4DB23D74
   VIEW.EXE      VIEW.EX_       15    10/18/1999  11:50    26828  58C2104F
   VIOCALLS.DLL  VIOCALLS.DL_   14    07/24/1999  15:26     2048  035E6B9A
   VIOTBL.DCP    VIOTBL.DC_     15    03/29/1999  17:14   225355  40A6409E
   VIOTBL.ISO    VIOTBL.IS_     15    03/29/1999  17:14   230105  349B721C
   VMAN.DLL      VMAN.DL_       16    04/07/1999  21:39    26637  EC69F3C3
   VMANWIN.SYS   VMANWIN.SY_    17    04/07/1999  17:40     3024  BCD1176A
   VPIC.SYS      VPIC.SY_       16    10/18/1999  12:34     9942  BB8D25BC
   VPICPARM.SYS  VPICPARM.SY_    8    10/18/1999  12:34      736  3A551DBB
   VTIMER.SYS    VTIMER.SY_     16    10/18/1999  12:35     9936  384D928C
   VW32S.SYS     VW32S.SY_      16    04/01/1999  17:26    18336  B5D35004
   VWIN.SYS      VWIN.SY_       16    10/18/1999  12:35    27088  5964DC17
   WCFGMRI.DLL   WCFGMRI.DL_    17    10/18/1999  12:11     3108  6A4E52FA
   WD24B.DSP     WD24B.DS_      16    04/03/1997  13:55    12050  F29F1B9D
   WINCFG.DLL    WINCFG.DL_     16    10/18/1999  12:11    12839  50618561
   WINFILE.EXE   WINFILE.EX_    13    10/27/1999  16:00   148896  26E9EF1E
   WINSCLIP.DLL  WINSCLIP.DL_   16    09/02/1999  12:05    14848  C63E01BF
   WINSDDE.DLL   WINSDDE.DL_    16    09/02/1999  12:05    18432  A4E7AF73
   WINSHELD.EXE  WINSHELD.EX_   16    10/27/1999  15:59    22016  69C63ED6
   WINSMSG.DLL   WINSMSG.DL_    16    09/02/1999  12:05    28441  04BD0009
   WPCLS.IMP     WPCLS.IM_       9    03/31/1997  17:35     8661  DA24BBC2
   WPCONFIG.DLL  WPCONFIG.DL_    8    10/18/1999  12:11   246078  20CAB11D
   WPCONMRI.DLL  WPCONMRI.DL_   16    10/18/1999  12:11    29230  23D8B172

   
                       FixPak Corrective Service levels and disk layouts  49


                   October 28, 1999 - Warp 4 FixPak XRIM012

   WPHELP.HLP    WPHELP.HL_      4    10/18/1999  11:25   911367  0311989A
   WPINET.DLL    WPINET.DL_     12    10/18/1999  12:24   115384  FD4E9EA0
   WPMSG.HLP     WPMSG.HL_      15    10/18/1999  11:25    56628  ED848127
   WPPRINT.DLL   WPPRINT.DL_     2    09/01/1999  10:56   364008  6E4B85F0
   WPPRINT.HLP   WPPRINT.HL_    14    10/18/1999  12:13    81182  C32A84CF
   WPPRTMRI.DLL  WPPRTMRI.DL_   14    10/18/1999  12:13    68947  D57BD413
   WPREXX.IMP    WPREXX.IM_     16    03/31/1997  17:35     6313  707B163F
   WPSINIT.WPS   WPSINIT.WP_    16    03/31/1997  17:35    15877  ACC13319
   WPSINST.CMD   WPSINST.CM_    17    05/06/1998  16:31     2813  45AD1428
   WW.EXE        WW.EX_         16    07/16/1998  14:31     8305  FE171078
   WWDLL.DLL     WWDLL.DL_       7    12/21/1997  01:29   276981  751E3674
   WWHOOK.DLL    WWHOOK.DL_     15    12/21/1997  01:29    27230  693E20F2
   XCOPY.EXE     XCOPY.EX_      15    10/18/1999  12:26    51712  DD4F64D4
   XPG00420.TBL  XPG00420.TB_   17    04/12/1999  15:51    27264  08668BA9
   XPG00864.TBL  XPG00864.TB_   16    04/12/1999  15:51    27264  2672604F

   ************************************************************************
   Product location on CSD:  A:\FIX\OS2.2
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.00
   Fixpak name:   XRIM012_   (Country = Italy)
   Pre-requisite CSD Level:  XRI4000_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*

   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   OS2LDR        OS2LDR.___     17    10/18/1999  11:34    33280  4DCF5E1F

   ************************************************************************
   Product location on CSD:  A:\FIX\OS2.3
   Product name:  "IBM OS/2 Base Operating System"
   Standard Edition  4.01
   Fixpak name:   XRIM012_   (Country = Italy)

   
                       FixPak Corrective Service levels and disk layouts  50


                   October 28, 1999 - Warp 4 FixPak XRIM012

   Pre-requisite CSD Level:  XRI4010_
   System Id:  1000
   Component Id:  5639A6100
   Archive is ON for this product.
   ________________________________________________________________________

   Default directories:

           ..\..\
           ..\*
           ..\..\MMOS2
           ..\..\MMOS2\*
           ..\..\VT
           ..\..\VT\*
           ..\..\PSFONTS
           ..\..\PSFONTS\*
           ..\..\LANGUAGE
           ..\..\LANGUAGE\*

   Files contained in Fixpak for product:

   Filename      Name on CSD   Disk#  Date        Time   Size     Checksum
   ------------  ------------  -----  ----------  -----  -------  --------
   APPDBUTL.DLL  APPDBUTL.DL_   17    10/14/1999  15:20    25013  E0B740DD
   APPSTART.EXE  APPSTART.EX_   17    10/18/1999  12:36    33864  247AB9D5
   NCAPPUTL.EXE  NCAPPUTL.EX_   17    10/18/1999  12:35    12612  74CC59B5
   OS2LDR        OS2LDR.___     17    10/18/1999  11:35    33280  6DB365B7
   PMLOGON.EXE   PMLOGON.EX_    17    10/14/1999  15:23    40107  308EDFC0
   PRNCFG.DLL    PRNCFG.DL_     17    10/14/1999  15:24    58258  E66FDD94
   TDESK.DLL     TDESK.DL_      17    10/18/1999  12:37     3769  D0DEEE34
   TLOGOFF.EXE   TLOGOFF.EX_    17    10/18/1999  12:37     9577  5F37E3EC
   TOBJECT.DLL   TOBJECT.DL_    17    10/14/1999  15:22     4876  D7AEDBF6
   TSHUTDWN.EXE  TSHUTDWN.EX_   17    10/18/1999  12:37     8611  FA7DE77C



















   
                       FixPak Corrective Service levels and disk layouts  51


                   October 28, 1999 - Warp 4 FixPak XRIM012

   10.0 SPACE UTILIZATION

   The FixPak installation process requires free space on the following
   drives:

   Space needed   Drive
   Up to 2MB      C:
   Up to 2MB      Boot drive (4MB if boot is C:)
   Up to 22MB     Drive with most free space, holds deferred files if
                  A:SERVICE method used.
   Up to 35MB     FixPak Archive/Backup for product with CSD level of
                  XRI4000
   Up to 35MB     FixPak Archive/Backup for product with CSD level of
                  XRI4010

   Note: The lines labeled "FixPak Archive/Backup for product with CSD level
   of" will be on the drive you specify and will occupy up to the size
   indicated for the Archive and for the Backup directories. If, for
   example, the indicated size is 30MB then the space actually occupied on
   the drive can be up to 60MB.


   10.0.1 RECOVERING FIXPAK ARCHIVE AND BACKUP SPACE

   Warning: Make sure you read and understand the following before removing
   the Archive and Backup files and directories.

   You can recover the space used for FixPak Archive and Backup files as
   long as you understand that doing this prevents you from being able to
   backout to the previous Backup or Archive level. If it becomes necessary
   at a later time to backout a FixPak, the only way you can do this is to
   reinstall Warp.

   Do the following to delete the FixPak Backup and Archive files and remove
   the files used by CSF to keep track of what service has been applied to
   your system.

   1.  Delete every instance of the following files on your system
       (search every drive and every directory they contain).
       þ   LOGF0000.*   (can be OS2 or MPM)
       þ   LOGSTART.*   (can be OS2 or MPM)
       þ   LOGARCH.*    (can be OS2 or MPM)
       þ   CSF_*.*
       þ   FIXSTART
   2.  Delete the files in the FixPak Archive and Backup directories on
       your harddisk.
   3.  Remove the FixPak Archive and Backup directories with the RMDIR
       command.




   
                                                       Space Utilization  52


                   October 28, 1999 - Warp 4 FixPak XRIM012

   10.0.2 TRADEMARKS

   The following terms are trademarks of the International Business Machines
   Corporation in the United States or other countries or both:

   þ  IBM
   þ  OS/2
   þ  WorkSpace On-Demand

   Other company, product, and service names may be trademarks or service
   marks of others.









































   
                                                       Space Utilization  53
